Truths and myths about superfoods in the era of the COVID-19 pandemic.

Nowadays, during the current COVID-19 pandemic, consumers increasingly seek foods that not only fulfill the basic need (i.e., satisfying hunger) but also enhance human health and well-being.

Nonplanar Spray-Coated Perovskite Solar Cells.

Spray coating is an industrially mature technique used to deposit thin films that combines high throughput with the ability to coat nonplanar surfaces. Here, we explore the use of ultrasonic spray coating to fabricate perovskite solar cells (PSCs) over rigid, nonplanar surfaces without problems caused by solution dewetting and subsequent "run-off". Encouragingly, we find that PSCs can be spray-coated using our processes onto glass substrates held at angles of inclination up to 45° away from the horizontal, with such devices having comparable power conversion efficiencies (up to 18.

Hot Lithography Vat Photopolymerisation 3D Printing: Vat Temperature vs. Mixture Design.

In the vat photopolymerisation 3D printing technique, the properties of the printed parts are highly dependent on the degree of conversion of the monomers. The mechanisms and advantages of vat photopolymerisation at elevated temperatures, or so called "hot lithography", were investigated in this paper. Two types of photoresins, commercially used as highly accurate castable resins, with different structural and diluent monomers, were employed in this study.

Towards the development of osteochondral allografts with reduced immunogenicity.

Nowadays, repair and replacement of hyaline articular cartilage still challenges orthopedic surgery. Using a graft of decellularized articular cartilage as a structural scaffold is considered as a promising therapy. So far, successful cell removal has only been possible for small samples with destruction of the macrostructure or loss of biomechanics.

Algorithm to determine orientation distribution function from microscopic images of fibrous networks: Validation with X-ray microtomography.

Quantitative analysis of fibre orientation in a random fibrous network (RFN) is important to understand their microstructure, properties and performance. 2D fibre orientation distribution presents an in-plane fibre orientation without any information on fibre orientation in thickness direction. This research introduces a fully parametric algorithm for computing 3D fibre orientation as thickness is important for high-density or thick fibrous networks.

Gas-Plasma-Activated Water Impact on Photo-Dependent Dormancy Mechanisms in Seeds.

Seeds sense temperature, nutrient levels and light conditions to inform decision making on the timing of germination. Limited light availability for photoblastic species results in irregular germination timing and losses of population germination percentage. Seed industries are therefore looking for interventions to mitigate this risk.

Assessing the immunosuppressive activity of alginate-encapsulated mesenchymal stromal cells on splenocytes.

Mesenchymal stromal cells (MSCs) show immunosuppressive effects both cell-to-cell contact (direct) with immune cells and by producing paracrine factors and extracellular vesicles (indirect). A key challenge in delivering this therapeutic effect is retaining the MSCs at the site of injection. One way to address this is by encapsulating the MSCs within suitable biomaterial scaffolds.

Experimental studies and simple numerical modeling of underwater electric discharges.

At present, underwater electric pulsed discharges are used in a wide range of modern applications. During the development of a system for generating underwater acoustic pressure pulses, a numerical model is an essential tool for guiding the design and interpreting the data. Developing a complex one-dimensional numerical code, like those presented in the literature, requires a substantial dedicated effort.

Lung Abnormalities Detected with Hyperpolarized Xe MRI in Patients with Long COVID.

Background Post-COVID-19 condition encompasses symptoms following COVID-19 infection that linger at least 4 weeks after the end of active infection. Symptoms are wide ranging, but breathlessness is common. Purpose To determine if the previously described lung abnormalities seen on hyperpolarized (HP) pulmonary xenon 129 (Xe) MRI scans in participants with post-COVID-19 condition who were hospitalized are also present in participants with post-COVID-19 condition who were not hospitalized.

Scalable Textile Manufacturing Methods for Fabricating Triboelectric Nanogenerators with Balanced Electrical and Wearable Properties.

Triboelectric nanogenerators (TENGs) are foreseen as a leading candidate to harvest mechanical energy from ambient sources such as human body movements. However, wearable TENGs, which are used for this purpose, require adequate wearability for long durations, in addition to sufficient electrical outputs. So far, it has been difficult to achieve this through the predominantly plastic-based wearable TENGs constructed using conventional nanogenerator fabrication methods.

Exploring the Mechanical Properties and Performance of Type-I Collagen at Various Length Scales: A Progress Report.

Collagen is the basic protein of animal tissues and has a complex hierarchical structure. It plays a crucial role in maintaining the mechanical and structural stability of biological tissues. Over the years, it has become a material of interest in the biomedical industries thanks to its excellent biocompatibility and biodegradability and low antigenicity.

Challenges and issues in continuum modelling of tribology, wear, cutting and other processes involving high-strain rate plastic deformation of metals.

Contribution of finite element method (FEM) as a modelling and simulation technique to represent complex tribological processes has improved our understanding about various biomaterials. This paper presents a review of the advances in the domain of finite element (FE) modelling for simulating tribology, wear, cutting and other processes involving high-strain rate plastic deformation of metals used in bio tribology and machining. Although the study is largely focused on material removal cases in metals, the modelling strategies can be applied to a wide range of other materials.

The Mitochondrial Genome in Aging and Disease and the Future of Mitochondrial Therapeutics.

Mitochondria are intracellular organelles that utilize nutrients to generate energy in the form of ATP by oxidative phosphorylation. Mitochondrial DNA (mtDNA) in humans is a 16,569 base pair double-stranded circular DNA that encodes for 13 vital proteins of the electron transport chain. Our understanding of the mitochondrial genome's transcription, translation, and maintenance is still emerging, and human pathologies caused by mtDNA dysfunction are widely observed.

Deviations from classical droplet evaporation theory.

In this article, we show that significant deviations from the classical quasi-steady models of droplet evaporation can arise solely due to transient effects in the gas phase. The problem of fully transient evaporation of a single droplet in an infinite atmosphere is solved in a generalized, dimensionless framework with explicitly stated assumptions. The differences between the classical quasi-steady and fully transient models are quantified for a wide range of the 10-dimensional input domain and a robust predictive tool to rapidly quantify this difference is reported.

Asperity level characterization of abrasive wear using atomic force microscopy.

Using an atomic force microscope, a nanoscale wear characterization method has been applied to a commercial steel substrate AISI 52100, a common bearing material. Two wear mechanisms were observed by the presented method: atom attrition and elastoplastic ploughing. It is shown that not only friction can be used to classify the difference between these two mechanisms, but also the 'degree of wear'.

Fracture behaviour and toughening mechanisms of dry and wet collagen.

The growing interest to the use of collagen films for biomedical applications motivates the analysis of their fracture behaviour in different environments. Studies revealed the decreased mechanical strength and stiffness as well as increased plasticity in water compared to collagen specimens tested in air. However, the fracture behaviour of pure collagen films in both air and water has not been reported so far.

SARS-CoV-2 viability on sports equipment is limited, and dependent on material composition.

The control of the COVID-19 pandemic in the UK has necessitated restrictions on amateur and professional sports due to the perceived infection risk to competitors, via direct person to person transmission, or possibly via the surfaces of sports equipment. The sharing of sports equipment such as tennis balls was therefore banned by some sport's governing bodies. We sought to investigate the potential of sporting equipment as transmission vectors of SARS-CoV-2.

Impaired pulmonary ventilation beyond pneumonia in COVID-19: A preliminary observation.

Background: Coronavirus disease 2019 (COVID-19) may severely impair pulmonary function and cause hypoxia. However, the association of COVID-19 pneumonia on CT with impaired ventilation remains unexplained. This pilot study aims to demonstrate the relationship between the radiological findings on COVID-19 CT images and ventilation abnormalities simulated in a computational model linked to the patients' symptoms.

Wearable Triboelectric Nanogenerator from Waste Materials for Autonomous Information Transmission Morse Code.

Electronic waste produced by plastic, toxic, and semiconducting components of existing electronic devices is dramatically increasing environmental pollution. To overcome these issues, the use of eco-friendly materials for designing such devices is attaining much attention. This current work presents a recycled material-based triboelectric nanogenerator (TENG) made of plastic waste and carbon-coated paper wipes (C@PWs), in which the PWs are also collected from a waste bin.

Surface engineering and the application of laser-based processes to stents - A review of the latest development.

Late in-stent thrombus and restenosis still represent two major challenges in stents' design. Surface treatment of stent is attracting attention due to the increasing importance of stenting intervention for coronary artery diseases. Several surface engineering techniques have been utilised to improve the biological response on a wide range of biomedical devices.

Personalised nitinol stent for focal plaques: Design and evaluation.

Unlabelled: The purpose of this study is to develop personalised nitinol stents for arteries with one and two opposite focal plaques. Novel designs are evaluated through comparison with a commercial stent design, in terms of lumen gain and shape as well as stress levels in the media layer after stenting.

Methods: Personalised stents are developed for arteries with one and two opposite focal plaques, based on medical imaging of patients and computer simulations.

Wound contraction under negative pressure therapy measured with digital image correlation and finite-element analysis in tissue phantoms and wound models.

The purpose of this study is to demonstrate the capabilities of finite-element (FE) models to predict contraction of wounds managed with negative pressure wound therapy (NPWT). The features of wounds and surrounding tissues were analysed to gain insights into the mechanical effects of NPWT on them. 3D digital image correlation (DIC) measurement of soft tissue phantoms was used to investigate the effect of wound thickness, size, and shape, which were further compared with results of FE simulations.

Controlling Resonator Nonlinearities and Modes through Geometry Optimization.

Controlling the nonlinearities of MEMS resonators is critical for their successful implementation in a wide range of sensing, signal conditioning, and filtering applications. Here, we utilize a passive technique based on geometry optimization to control the nonlinearities and the dynamical response of MEMS resonators. Also, we explored active technique i.