Green Nanotechnology of Cell Wall Swelling for Nanostructured Transparent Wood of High Optical Performance.

Transparent wood composites provide new functionalities through active additives distributed at the nanoscale. Scalable nanotechnology includes processing where nanoparticles and molecules are brought into the dense wood cell wall. A novel cell wall swelling step through green chemistry is therefore investigated.

Interaction of complex particles: A framework for the rapid and accurate approximation of pair potentials using neural networks.

Motivated by the limitations of conventional coarse-grained molecular dynamics for simulation of large systems of nanoparticles and the challenges in efficiently representing general pair potentials for rigid bodies, we present a method for approximating general rigid body pair potentials based on a specialized type of deep neural network that maintains essential properties, such as conservation of energy and invariance to the chosen origins of the particles. The network uses a specialized geometric abstraction layer to convert the relative coordinates of the rigid bodies to input more suitable to a conventional artificial neural network, which is trained together with the specialized layer. This results in geometric representations of the particles optimized for the specific potential.

Ionic Thermoelectric-Powered Resistive Sensors.

Ionic thermoelectric supercapacitors (ITESCs) are noted for their high ionic Seebeck coefficient (α) to convert thermal energy into electrical current through charging. This work demonstrates the utilization of the charging and discharging current from ITESCs to directly operate resistive sensors. The humidity monitoring is powered by applying a periodic temperature gradient to a connected ITESC.

Decoupling Conductivity, Heterogeneous Electron Transfer Rate, and Diffusion in Organic Molecular Electrocatalysis: Oxygen Reduction Reaction on Poly(3,4-ethylenedioxythiophene).

The electrified production of hydrogen peroxide (HO) by oxygen reduction reaction (ORR) is attractive to increase the sustainability of chemical industry. Here the same chains of intrinsically conductive polymer, poly(3,4-ethylenedioxythiophene) (PEDOT) are utilized, as ORR electrocatalyst, while varying polymeric primary dopants (PSS and Nafion) and the level of secondary doping with DMSO. These changes modulate various properties of the film, such as its microscale organization and electronic conductivity.

Eco-friendly and strong lignin-containing microfibrillated cellulose films for high-performance separators of aqueous zinc batteries.

Aqueous zinc-ion batteries have gained significant interest, offering several distinct advantages over conventional lithium-ion batteries owing to their compelling low cost, enhanced battery safety, and excellent environmental friendliness. Nevertheless, the unfortunate growth of zinc dendrites during cycling leads to poor electrochemical performance of zinc batteries, primarily attributed to the diminished wet mechanical properties and limited electrolyte uptake of existing commercial separators. Herein, a bio-based separator was developed from sustainable resources using natural polymers derived from wood pulp to replace fossil-based polyolefin separators.

Glucose-Sensitive Biohybrid Roots for Supercapacitive Bioanodes.

Plants as living organisms, as well as their material-structural components and physiological processes, offer promising elements for developing more sustainable technologies. Previously, we demonstrated that plants could acquire electronic functionality, as their enzymatic activity catalyzes the in vivo polymerization of water-soluble conjugated oligomers. We then leveraged plant-integrated conductors to develop biohybrid energy storage devices and circuits.

Interconnecting EDOT-Based Polymers with Native Lignin toward Enhanced Charge Storage in Conductive Wood.

The 3D micro- and nanostructure of wood has extensively been employed as a template for cost-effective and renewable electronic technologies. However, other electroactive components, in particular native lignin, have been overlooked due to the absence of an approach that allows access of the lignin through the cell wall. In this study, we introduce an approach that focuses on establishing conjugated-polymer-based electrical connections at various length scales within the wood structure, aiming to leverage the charge storage capacity of native lignin in wood-based energy storage electrodes.

Allylation and Thermosetting of Acetosolv Wheat Straw Lignin.

The acetosolv extraction, allylation and subsequent cross-linking of wheat straw lignin to thermoset biomaterials is herein described. The extraction temperature proved to be of great importance for the quality of the resulting lignin, with moderate temperature being key for preservation of β-O-4' linkages. The allylation of the acetosolv lignin was carried out using three different synthetic strategies, resulting in selective installation of either benzylic or phenolic allyl ethers, or unselective allylation of various hydroxyl groups via etherification and carboxyallylation.

Structure-based clustering and mutagenesis of bacterial tannases reveals the importance and diversity of active site-capping domains.

Tannins are critical plant defense metabolites, enriched in bark and leaves, that protect against microorganisms and insects by binding to and precipitating proteins. Hydrolyzable tannins contain ester bonds which can be cleaved by tannases-serine hydrolases containing so-called "cap" domains covering their active sites. However, comprehensive insights into the biochemical properties and structural diversity of tannases are limited, especially regarding their cap domains.

The use of spent mushroom substrate as biologically pretreated wood and its fibrillation.

Utilization of biomass and reuse of industrial by-products and their sustainable and resource-efficient development into products that are inherently non-toxic is important to reduce the use of hazardous substances in the design, manufacture and application of biomaterials. The hypothesis in this study is that spent mushroom substrate (SMS), a by-product from mushroom production, has already undergone a biological pretreatment and thus, can be used directly as a starting material for fibrillation into value-added and functional biomaterial, without the use of toxic substances. The study show that SMS can be effectively fibrillated at a very high concentration of 6.

Polymeric resins containing modified starch as environmentally friendly adsorbents for dyes and metal ions removal from wastewater.

Effective removal of organic and inorganic impurities by adsorption technique requires the preparation of new materials characterized by low production costs, significant sorption capacity, and reduced toxicity, derived from natural and renewable sources. To address these challenges, new adsorbents have been developed in the form of polymer microspheres based on ethylene glycol dimethacrylate (EGDMA) and vinyl acetate (VA) (EGDMA/VA) containing starch (St) modified with boric acid (B) and dodecyl-S-thiuronium dodecylthioacetate (DiTDTA) for the removal of dyes: C.I.

Synchronized ultrasonography and electromyography signals detection enabled by nanocellulose based ultrasound transparent electrodes.

Accurate evaluation of electrophysiological and morphological characteristics of the skeletal muscles is critical to establish a comprehensive assessment of the human neuromusculoskeletal function in vivo. However, current technological challenges lie in unsynchronized and unparallel operation of separate acquisition systems such as surface electromyography (sEMG) and ultrasonography. Key problem is the lack of ultrasound transparency of current electrophysiological electrodes.

Fully bio-based water-resistant wood coatings derived from tree bark.

Surface protection is essential when using wood as a construction material. However, the industry lacks sustainable alternatives to replace the presently dominant fossil-based synthetic water-resistant coatings. Here, we show a fully bio-based wood surface protection system using components sourced from birch bark and spruce bark, inspired by the natural barrier function of bark in trees.

Stick, Slide, or Bounce: Charge Density Controls Nanoparticle Diffusion.

The diffusion and interaction dynamics of charged nanoparticles (NPs) within charged polymer networks are crucial for understanding various biological and biomedical applications. Using a combination of coarse-grained molecular dynamics simulations and experimental diffusion studies, we investigate the effects of the NP size, relative surface charge density (ζ), and concentration on the NP permeation length and time. We propose a scaling law for the relative diffusion of NPs with respect to concentration and ζ, highlighting how these factors influence the NP movement within the network.

Use of Recycled Additive Materials to Promote Efficient Use of Resources While Acting as an Effective Toughness Modifier of Wood-Polymer Composites.

Wood-polymer composites (WPCs) with polypropylene (PP) matrix suffer from low toughness, and fossil-based impact modifiers are used to improve their performance. Material substitution of virgin fossil-based materials and material recycling are key aspects of sustainable development and therefore recycled denim fabric, and elastomer were evaluated to replace the virgin elastomer modifier commonly used in commercial WPCs. Microtomography images showed that the extrusion process fibrillated the denim fabric into long, thin fibers that were well dispersed within the WPC, while the recycled elastomer was found close to the wood fibers, acting as a soft interphase between the wood fibers and PP.

Metal Ion-/Proton-Coupled Electron Transfer (MPCET) on -Quinone.

Quinol/quinone equilibria are ubiquitous in nature and find multiple technological applications, most recently in electrical charge storage. Much research has been devoted to proton-coupled electron transfer (PCET) in such systems and to bidentate complexation of -quinol (catechol) ligands with multivalent metal ions but rarely to the interplay of these two reactions. Here, we investigate the impact of a redox-inactive metal ion, as a complexing and charge-compensating agent, on redox processes of catechol in aqueous solutions, that is, in the presence of proton equilibria.

sp. nov. and sp. nov., novel soil streptomycetes metabolizing mutan and alternan.

Six bacterial strains, Mut1, Mut2, Alt1, Alt2, Alt3, and Alt4, were isolated from soil samples collected in parks in Gothenburg, Sweden, based on their ability to utilize the insoluble polysaccharides α-1,3-glucan (mutan; Mut strains) or the mixed-linkage α-1,3/α-1,6-glucan (alternan; Alt strains). Analysis of 16S rRNA gene sequences identified all strains as members of the genus . The genomes of the strains were sequenced and subsequent phylogenetic analyses identified Mut2 as a strain of and Alt1, Alt2 and Alt4 as strains of while Mut1 and Alt3 were most closely related to the type strains NBRC 101007 and NRRL ISP-5137, respectively.

Sprayed water-based lignin colloidal nanoparticle-cellulose nanofibril hybrid films with UV-blocking ability.

In the context of global climate change, the demand for new functional materials that are sustainable and environmentally friendly is rapidly increasing. Cellulose and lignin are the two most abundant raw materials in nature, and are ideal components for functional materials. The hydrophilic interface and easy film-forming properties of cellulose nanofibrils make them excellent candidates for natural biopolymer templates and network structures.

A unique metabolic gene cluster regulates lactose and galactose metabolism in the yeast .

Lactose assimilation is a relatively rare trait in yeasts, and yeast species have long served as model organisms for studying lactose metabolism. Meanwhile, the metabolic strategies of most other lactose-assimilating yeasts remain unknown. In this work, we have elucidated the genetic determinants of the superior lactose-growing yeast .

A Polymeric Two-in-One Electron Transport Layer and Transparent Electrode for Efficient Indoor All-Organic Solar Cells.

Transparent electrodes (TEs) are vital in optoelectronic devices, enabling the interaction of light and charges. While indium tin oxide (ITO) has traditionally served as a benchmark TE, its high cost prompts the exploration of alternatives to optimize electrode characteristics and improve device efficiencies. Conducting polymers, which combine polymer advantages with metal-like conductivity, emerge as a promising solution for TEs.

Scalable Purification, Storage, and Release of Plant-Derived Nanovesicles for Local Therapy Using Nanostructured All-Cellulose Composite Membranes.

Plant-derived nanovesicles such as bilberries nanovesicles (BNVs) show immense promise as next-generation biotherapeutics and functional food ingredients; however, their isolation, purification, and storage on a large scale remain a challenge. In this study, biocompatible and nanostructured composite all-cellulose membranes are introduced as a scalable and straightforward approach to the isolation of BNV. The membranes consisting of a cellulose acetate matrix infused with anionic or cationic nanocelluloses promoted selective capture of BNVs through electrostatic and size-exclusion-mediated depth filtration.

Hierarchical Incorporation of Reduced Graphene Oxide into Anisotropic Cellulose Nanofiber Foams Improves Their Thermal Insulation.

Anisotropic cellulose nanofiber (CNF) foams represent the state-of-the-art in renewable insulation. These foams consist of large (diameter >10 μm) uniaxially aligned macropores with mesoporous pore-walls and aligned CNF. The foams show anisotropic thermal conduction, where heat transports more efficiently in the axial direction (along the aligned CNF and macropores) than in the radial direction (perpendicular to the aligned CNF and macropores).

Influence of Hardwood Lignin Blending on the Electrical and Mechanical Properties of Cellulose Based Carbon Fibers.

Carbon fibers (CFs) are fabricated by blending hardwood kraft lignin (HKL) and cellulose. Various compositions of HKL and cellulose in blended solutions are air-gap spun in 1-ethyl-3-methylimidazolium acetate (EMIM OAc), resulting in the production of virtually bead-free quality fibers. The synthesized HKL-cellulose fibers are thermostabilized and carbonized to achieve CFs, and consequently their electrical and mechanical properties are evaluated.