Charcoal dentifrices: A laboratory study of their safety and efficacy.

Purpose: To compare charcoal-containing dentifrices (CDs) to non-charcoal containing dentifrices (NCDs) through the following experiments: potentially available fluoride, 1-minute fluoride release, pH, cytotoxicity, heavy metals, enamel fluoride uptake (EFU) and relative dentin abrasivity (RDA).

Methods: Nine fluoride dentifrices; six CDs and three NCDs were tested (n= 3) for available fluoride, the amount of fluoride released within 1 minute, pH cytotoxicity, heavy metals, EFU and RDA. Four CDs and 1 NCD contained sodium fluoride (NaF) as the active ingredient whereas two dentifrices contained stannous fluoride (SnF₂; 1 CD and 1 NCD), and two dentifrices contained disodium monofluorophosphate (Na₂FPO₃, or Na₂MFP; 1 CD and 1 NCD).

Exploring the efficacy of in-vitro low-temperature plasma treatment on single and multispecies dental cariogenic biofilms.

The primary aim of this study was to investigate the impact of treatment with low-temperature plasma (LTP) for varying exposure durations on a multispecies cariogenic biofilm comprising C. albicans, L. casei, and S.

Calcium Sulfate Disks for Sustained-Release of Amoxicillin and Moxifloxacin for the Treatment of Osteomyelitis.

The purpose of this in vitro study was to develop calcium sulfate (CS)-based disks infused with an antimicrobial drug, which can be used as a post-surgical treatment modality for osteomyelitis. CS powder was embedded with 10% antibiotic, amoxicillin (AMX) or moxifloxacin (MFX), to form composite disks 11 mm in diameter that were tested for their degradation and antibiotic release profiles. For the disk degradation study portion, the single drug-loaded disks were placed in individual meshes, subsequently submerged in phosphate-buffered saline (PBS), and incubated at 37 °C.

Effect of thermal cycling on the flexure strength of CAD-CAM denture base materials: An in vitro study.

Statement Of Problem: The impact of thermal cycling on the flexure strength of contemporary denture base materials remains inadequately understood despite its crucial role in determining the long-term performance of complete dentures.

Purpose: The purpose of this in vitro study was to evaluate the flexural strength of different CAD-CAM denture base materials and the effects of thermal cycling.

Material And Methods: A total of 120 rectangular specimens were fabricated from 6 denture base materials according to the International Organization for Standardization (ISO) 20795-1:2013 standard: a heat-compressed PMMA ([Lucitone 199 [C-L199]), 2 brands of milled material (Ivotion Base [M-IB] and Lucitone Digital Fit [M-LDF]), and 3 types of 3- dimensionally (3D) printed material (Lucitone Digital Print [P-LDP], Flexcera Base [P-FB], and FotoDent Dentures [P-FD]).

Conceptual Principles in Pediatric Craniomaxillofacial Reconstruction.

Pediatric craniomaxillofacial reconstruction must be approached through the lens of growth and durability. A systematic approach of matching defects to donor tissue drives the selection of autologous reconstructive technique. The menu of available methods for reconstruction can be organized in a manner similar to adults, with special considerations for growth and development.

Rapid and Label-Free Histopathology of Oral Lesions Using Deep Learning Applied to Optical and Infrared Spectroscopic Imaging Data.

Oral potentially malignant disorders (OPMDs) are precursors to over 80% of oral cancers. Hematoxylin and eosin (H&E) staining, followed by pathologist interpretation of tissue and cellular morphology, is the current gold standard for diagnosis. However, this method is qualitative, can result in errors during the multi-step diagnostic process, and results may have significant inter-observer variability.

Constructing the brief diagnostic criteria for temporomandibular disorders (bDC/TMD) for field testing.

Background: Despite advances in temporomandibular disorders' (TMDs) diagnosis, the diagnostic process continues to be problematic in non-specialist settings.

Objective: To complete a Delphi process to shorten the Diagnostic Criteria for TMD (DC/TMD) to a brief DC/TMD (bDC/TMD) for expedient clinical diagnosis and initial management.

Methods: An international Delphi panel was created with 23 clinicians representing major specialities, general dentistry and related fields.

Effect of mastication load on retention force of custom-made LOCATOR abutments manufactured for angled implants: An in vitro study.

Statement Of Problem: Custom-made angled LOCATOR abutments have been used to compensate for the angulation of implants placed to support removable prostheses; however, their retention forces and the impact of mastication loading on retention have yet to be well addressed.

Purpose: The purpose of this in vitro study was to evaluate the retention force of custom-made LOCATOR abutments for implants placed at 0-, 15-, and 30-degree angulations with prefabricated abutments and to investigate the effect of mastication load on retention.

Material And Methods: Implant analogs were placed at the first molars of 40 maxillary typodonts, and 40 LOCATOR abutments were fabricated.

Periodontal Effects of the Reversible Dipeptidyl Peptidase 1 Inhibitor Brensocatib in Bronchiectasis.

Aims: Brensocatib is a reversible inhibitor of dipeptidyl peptidase 1 (cathepsin C), in development to treat chronic non-cystic fibrosis bronchiectasis. The phase 2, randomized, placebo-controlled WILLOW trial (NCT03218917) was conducted to examine whether brensocatib reduced the incidence of pulmonary exacerbations. Brensocatib prolonged the time to the first exacerbation and led to fewer exacerbations than placebo.

Educational game improves systems thinking, socialization, and teamwork among students of 13 health professions programs.

Systems thinking and interprofessional collaborative practice competencies are critical to inculcate in students of health professions programs. The purpose of this study was to evaluate the impact that an interprofessional education (IPE) experience consisting of an educational game, Friday Night at the ER (FNER), and structured debriefing had on students' systems thinking and self-assessed interprofessional socialization and teamwork skills. Systems thinking was evaluated using the Systems Thinking Scale (STS), and interprofessional socialization and teamwork were evaluated using a modified Interprofessional Socialization and Valuing Scale-9 (ISVS-9) and Interprofessional Collaboration Competency Attainment Scale (ICCAS) question #21.

Change in students' critical thinking over the course of dental education.

Purpose: The purpose of this study was to test whether critical thinking changes over the course of dental education by assessing dental students at the beginning and toward the end of their training.

Methods: Dental student participants completed a survey at the beginning of their first year (August 2019) and at the start of their last year of dental school (August 2022). The survey consisted of two instruments designed to measure the disposition and metacognition components of critical thinking.

Resident selection, assessment, and management: Proceedings of the 2022 ADEA Advanced Dental Education Summit.

The fifth biennial Advanced Dental Education Summit was organized by the ADEA Council on Advanced Education Programs. With a focus on "Resident selection, assessment, and management," the summit aimed to discuss best practices for selecting, assessing, and managing advanced education residents. Expert presentations covered the resident's journey from interview to graduation, emphasizing strategies for supporting resident wellness, success, and evaluation.

Human oral lectin ZG16B acts as a cell wall polysaccharide probe to decode host-microbe interactions with oral commensals.

The oral microbiome is critical to human health and disease, yet the role that host salivary proteins play in maintaining oral health is unclear. A highly expressed gene in human salivary glands encodes the lectin zymogen granule protein 16 homolog B (ZG16B). Despite the abundance of this protein, its interaction partners in the oral microbiome are unknown.

Effect of adding a hard-reline material on the flexural strength of conventional, 3D-printed, and milled denture base materials.

Statement Of Problem: Novel 3-dimensionally printed resin and milled polymethyl methacrylate materials have been marketed for computer-aided design and computer-aided manufacturing (CAD-CAM) denture base fabrication. However, information on the flexural strength of digitally fabricated denture base material is limited, and little is known about how they are affected by a hard-reline procedure.

Purpose: The purpose of this in vitro study was to assess the flexural strength of 6 digitally manufactured denture base materials and to assess the effect of a hard-reline procedure on their flexural strength.

Mastication inefficiency due to diminished or lack of occlusal support is associated with increased blood glucose levels in patients with type 2 diabetes.

Background: It has been shown that mastication may contribute to a lower risk of diabetes, and occlusal support reduced the risk of diabetes by improving glucose metabolism after meals. However, the relationship between inefficient mastication and blood glucose levels in patients with type 2 diabetes (T2D) remains unclear. This retrospective study, therefore, aimed to investigate the association between mastication inefficiency due to diminished occlusal support and blood glucose control in subjects with T2D.

Fracture strength of screw-retained zirconia crowns assembled on zirconia and titanium implants.

Purpose: This in vitro study evaluated the fracture strength of screw-retained zirconia crowns connected to zirconia (Zr) and titanium (Ti) implants after undergoing a simulation of 5 years of clinical use.

Materials And Methods: Forty-eight screw-retained zirconia crowns were fabricated and assembled on four implant systems, with 12 in each group: (1) Zr implant (pure ceramic; Straumann AG) (PZr); (2) Zr implant (NobelPearl; Nobel Biocare) (NPZr); (3) Ti-Zr implant (Bone Level Roxolid; Straumann AG) (RSTiZr); (4) Ti implant (Conical Connection PMC; Nobel Biocare) (NRTi). Crowns were luted to their associated abutments using resin cement and then torqued to their assigned implants at the recommended torque value.

Remarks on "Temporomandibular Disorders: Priorities for Research and Care": how will Chile advance?

Temporomandibular disorders (TMDs) are complex multi-system disorders for which common traditional dental-centric approaches to research and care unfortunately continue to prevail. A committee appointed by the National Academies of Sciences, Engineering and Medicine (NAM) of the United States of America summarized important recommendations regarding the urgent need to transform, from the predominantly biomedical model, the research, professional education/training, and patient care for TMDs into the biopsychosocial model that is standard in the rest of pain medicine. The release of the Consensus Study Report identifies eleven short-term and long-term recommendations regarding gaps and opportunities oriented towards the situation in the US, which are equally applicable to the situation in Chile.

Shade match comparison of CAD-CAM single crowns to a lithium disilicate crown.

Purpose: To assess the shade match ability of four varieties of all-ceramic crowns to a neighboring bilayered lithium disilicate crown.

Material And Methods: A dentiform was used to fabricate a bilayered lithium disilicate crown on the maxillary right central incisor, following the anatomy and shade of a selected natural tooth. Two crowns (one full-contour, one cutback) were then designed on a prepared maxillary left central incisor, following the contour of the neighboring crown.

Dental topographic proxies for ecological characteristics in carnivoran mammals.

Form-function relationships in mammalian feeding systems are active topics of research in evolutionary biology. This is due principally to their fundamental importance for understanding dietary adaptations in extinct taxa and macro-evolutionary patterns of morphological transformations through changing environments. We hypothesize that three-dimensional dental topographic metrics represent stronger predictors for dietary and other ecological variables than do linear measurements.

The effects of manufacturing technologies on the surface accuracy of CAD-CAM occlusal splints.

Purpose: To investigate the effects of the manufacturing technologies on the surface (cameo and intaglio) accuracy (trueness and precision) of computer-aided design and computer-aided manufacturing (CAD-CAM) occlusal splints.

Materials And Methods: The digital design of the master occlusal splint was designed in a CAD software program. Six groups (n = 10) were tested in this study, including Group 1 - Milling (Wax), Group 2 - Heat-polymerizing, Group 3 - Milling (M series), Group 4 - Milling (DWX-51/52D), Group 5 - 3D-printing (Cares P30), and Group 6 - 3D-printing (M2).

Impaired wound healing following cranial vault reconstruction in a patient with an atypical phenotype of Marfan syndrome: A case report.

Background: Marfan syndrome (MFS) is an autosomal dominant disorder of the connective tissues caused by mutations in the FBN1 gene which can result in widespread systemic involvement. Loeys-Dietz syndrome (LDS) is a related autosomal dominant disorder of connective tissue with widespread systemic involvement which has phenotypic overlap with MFS. LDS is caused by heterozygous pathogenic variants in six different genes, the most common of which involve transforming growth factor beta-receptor 1 or 2.