In-field use of I-VED electrical impedance sensor for assessing post-dive decompression stress in humans.

Purpose: Ultrasound imaging is commonly used in decompression research to assess venous gas emboli (VGE) post-dive, with higher loads associated with increased decompression sickness risk. This work examines, for the first time in humans, the performance of a novel electrical impedance spectroscopy technology (I-VED), on possible detection of post-dive bubbles presence and arterial endothelial dysfunction that may be used as markers of decompression stress.

Methods: I-VED signals were recorded in scuba divers who performed standardized pool dives before and at set time points after their dives at 35-minute intervals for about two hours.

The role of air relative humidity on the wettability of Pseudomonas fluorescens AR11 biofilms.

Biofilms are complex porous materials formed by microorganisms, polysaccharides, proteins, eDNA, inorganic matter, and water. They are ubiquitous in various environmental niches and are known to grow at solid-liquid, solid-air and air-liquid interfaces, often causing problems in several industrial and sanitary fields. Their removal is a challenge in many applications and numerous studies have been conducted to identify promising chemical species as cleaning agents.

Highly sensitive resistance spectroscopy technique for online monitoring of biofilm growth on metallic surfaces.

Online techniques for monitoring biofilm formation and evolution are limited, especially as regards its application in flowing water systems. This is chiefly due to the absence of efficient non-destructive and non-invasive sensing methods. In this study, a sensitive electrical resistance spectroscopy technique is developed to monitor non-invasively and in real time the growth of biofilms over metallic surfaces inside water flow systems.

Forced Wetting Properties of Bacteria-Laden Droplets Experiencing Initial Evaporation.

Microbial adhesion and spreading on surfaces are crucial aspects in environmental and industrial settings being also the early stage of complex surface-attached microbial communities known as biofilms. In this work, -laden droplets on hydrophilic substrates (glass coupons) are allowed to partially evaporate before running wetting measurements, to study the effect of evaporation on their interfacial behavior during spillover or splashing. Forced wetting is investigated by imposing controlled centrifugal forces, using a novel rotatory device ().

Migration of surface-associated microbial communities in spaceflight habitats.

Astronauts are spending longer periods locked up in ships or stations for scientific and exploration spatial missions. The International Space Station (ISS) has been inhabited continuously for more than 20 years and the duration of space stays by crews could lengthen with the objectives of human presence on the moon and Mars. If the environment of these space habitats is designed for the comfort of astronauts, it is also conducive to other forms of life such as embarked microorganisms.

Structure Identification of Adsorbed Anionic-Nonionic Binary Surfactant Layers Based on Interfacial Shear Rheology Studies and Surface Tension Isotherms.

Mixtures of anionic sodium oleate (NaOl) and nonionic ethoxylated or alkoxylated surfactants improve the selective separation of magnesite particles from mineral ores during the process of flotation. Apart from triggering the hydrophobicity of magnesite particles, these surfactant molecules adsorb to the air-liquid interface of flotation bubbles, changing the interfacial properties and thus affecting the flotation efficiency. The structure of adsorbed surfactants layers at the air-liquid interface depends on the adsorption kinetics of each surfactant and the reformation of intermolecular forces upon mixing.

A New Phantom that Simulates Electrically a Human Blood Vessel Surrounded by Tissues: Development and Validation Against In-Vivo Measurements.

This study aims to develop a phantom that simulates the electrical properties of a human blood vessel surrounded by tissues, inside which bubbles can be infused to mimic Decompression Sickness (DCS) conditions. This phantom may be used to calibrate novel electrical methods for bubbles detection in humans and study bubble dynamics during DCS. It may contribute to the limitation of in-vivo trials and time/effort saving, while its use can be extended to other biomedical applications.

Bubble growth analysis during subcooled boiling experiments on-board the international space station: Benchmark image analysis.

This work compares four different image processing algorithms for the analysis of image data obtained during the Multiscale Boiling Experiment of ESA, executed on-board the International Space Station. Two separate experimental campaigns have been performed in 2019 and 2020, aiming to investigate boiling phenomena in microgravity, with and without the presence of shear flow and electric field. A heated substrate, at the bottom of the test cell, creates a temperature profile across the liquid bulk above it.

Wetting and Imbibition Characteristics of Biofilms Grown on Stainless Steel.

This study aims to provide insights into biofilm resistance associated with their structural properties acquired during formation and development. On this account, the wetting and imbibition behavior of dehydrated biofilms grown on stainless steel electropolished substrates is thoroughly examined at different biofilm ages. A polar liquid (water) and a non-polar liquid (diiodomethane) are employed as wetting agents in the form of sessile droplets.

Wetting properties of dehydrated biofilms under different growth conditions.

Biofilms are resilient to environmental conditions and often resistant even to strong disinfectants. It is crucial to investigate their interfacial properties, which can be effectively characterized by wetting analysis. Wetting phenomena on biofilm surfaces have been poorly investigated in literature, in particular a systematic study of wetting on real biofilm-coated substrates including the application of external body forces (forced wetting, i.

Wetting of Dehydrated Hydrophilic Biofilms under the Action of External Body Forces.

Wetting of dehydrated biofilms grown on glass substrates by an external liquid is employed as a means to investigate the complex morphology of these biofilms along with their capability to interact with external fluids. The porous structure left behind after dehydration induces interesting droplet spreading on the external surface and imbibition into pores upon wetting. Static contact angles and volume loss by imbibition measured right upon droplet deposition indicate that biofilms of higher incubation times show a higher porosity and effective hydrophilicity.

A novel device for in situ study of gas adsorption under rotation.

The effect of rotation on adsorption kinetics of CO on activated carbon (AC) is studied using a novel rotation device. The device consists of a rotating cylindrical cell with inner dimensions of 4.5 cm radius and 1 mm height, while it operates at 5000 and 8000 rpm.

Antibiofilm Properties of Temporin-L on in Static and In-Flow Conditions.

Biofilms consist of a complex microbial community adhering to biotic or abiotic surfaces and enclosed within a protein/polysaccharide self-produced matrix. The formation of this structure represents the most important adaptive mechanism that leads to antibacterial resistance, and therefore, closely connected to pathogenicity. Antimicrobial peptides (AMPs) could represent attractive candidates for the design of new antibiotics because of their specific characteristics.

On a generalized framework for turbulent collision frequency models in flotation: The road from past inconsistencies to a concise algebraic expression for fine particles.

Process modeling is a valuable tool for process design and optimization. Nonetheless, the extent of its use depends on the physical complexity of each particular application. Flotation is one of the most complex processes to model.

The role of flow in bacterial biofilm morphology and wetting properties.

Biofilms are bacterial communities embedded in an extracellular matrix, able to adhere to surfaces. Different experimental set-ups are widely used for in vitro biofilm cultivation; however, a well-defined comparison among different culture conditions, especially suited to interfacial characterization, is still lacking in the literature. The main objective of this work is to study the role of flow on biofilm formation, morphology and interfacial properties.

A critical review on turbulent collision frequency/efficiency models in flotation: Unravelling the path from general coagulation to flotation.

Flotation is a very important separation process in the mining industry. In addition, it finds important application as a water treatment process. The better design of flotation devices and operation strategies requires development of reliable and consistent mathematical models.

The effect of influent temperature variations in a sedimentation tank for potable water treatment--a computational fluid dynamics study.

A computational fluid dynamics (CFD) model is used to assess the effect of influent temperature variation on solids settling in a sedimentation tank for potable water treatment. The model is based on the CFD code Fluent and exploits several specific aspects of the potable water application to derive a computational tool much more efficient than the corresponding tools employed to simulate primary and secondary wastewater settling tanks. The linearity of the particle conservation equations allows separate calculations for each particle size class, leading to the uncoupling of the CFD problem from a particular inlet particle size distribution.

Bubble dynamics during the non-isothermal degassing of liquids. Exploiting microgravity conditions.

This work reviews the up to date state of understanding of dynamic phenomena occurring when gas bubbles grow over submerged heated surfaces. Gas bubbles are produced on hot surfaces because the adjacent liquid layers become superheated causing local desorption of dissolved gases while the liquid far afield remains at low temperatures. Non-isothermal degassing is a very complex process combining heat and mass transport coupled with momentum exchange between the two phases.

Modeling local flotation frequency in a turbulent flow field.

Despite the significance of turbulent fluid motion for enhancing the flotation rate in several industrial processes, there is no unified approach to the modeling of the flotation rate in a turbulent flow field. Appropriate modeling of the local flotation (bubble-particle attachment) rate is the basic constituent for global modeling and prediction of flotation equipment efficiency. Existing approaches for the local flotation rate are limited to specific set of conditions like high or low turbulence.