Evaluation of the effects of cold atmospheric plasma and plasma-treated liquids in cancer cell cultures.

Cold atmospheric plasma (CAP) is a potential anticancer therapy. CAP has cytotoxic effects when applied either directly to cancer cell cultures or indirectly through plasma-conditioned liquids. This protocol describes how to treat adherent cultures of human cancer cell lines with CAP or plasma-conditioned medium and determine cell viability following treatment.

Treatment of the Supernatant of Anaerobically Digested Organic Fraction of Municipal Solid Waste in a Demo-Scale Mesophilic External Anaerobic Membrane Bioreactor.

Conventional aerobic biological treatments of digested organic fraction of municipal solid waste (OFMSW) slurries-usually conventional activated sludge or aerobic membrane bioreactor (AeMBR)-are inefficient in terms of energy and economically costly because of the high aeration requirements and the high amount of produced sludge. In this study, the supernatant obtained after the anaerobic digestion of OFMSW was treated in a mesophilic demo-scale anaerobic membrane bioreactor (AnMBR) at cross flow velocities (CFVs) between 1 and 3.5 m⋅s.

Integration of membrane distillation as volume reduction technology for in-land desalination brines management: Pre-treatments and scaling limitations.

Management of in-land reverse osmosis (RO) desalination brines generated from surface brackish waters is a current challenge. Among the different near-Zero and Zero Liquid Discharge (ZLD) alternatives, Membrane Distillation (MD), in which the transport of water is thermally driven, appears as an attractive technology if a residual heat source is available. The aim of this study was to identify the limits of Direct Contact MD (DCMD) pre-treatments such as acidification and aeration, or the combination of both to quantify the scaling reduction potential when treating a RO brine from surface brackish water.

Towards suitable description of reference architectures.

Due to the increasing size and complexity of many current software systems, the architectural design of these systems has become a considerately complicated task. In this scenario, reference architectures have already proven to be very relevant to support the architectural design of systems in diverse critical application domains, such as health, avionics, transportation, and the automotive sector. However, these architectures are described in many different approaches, such as using textual description, informal models, and even modeling languages as UML.

Valorisation options for Zn and Cu recovery from metal influenced acid mine waters through selective precipitation and ion-exchange processes: promotion of on-site/off-site management options.

Acid mine waters (AMWs), generated in the processing of polymetallic sulphides, contain copper and zinc as the main valuable transition metal ions, which are typically removed by liming, due to their great environmental impact. In this context, this work proposes the integration of selective precipitation (SP) and ion-exchange (IX) processes for the separation and recovery of both valuable metals to encourage on-site and off-site management options promoting valorisation routes. Thus, the main objectives of this work were (i) the selective removal of Fe(III) and Al(III), using NaOH under pH control (pH < 5) to avoid the precipitation of Cu(II) and Zn(II) and (ii) the evaluation of a solvent-impregnated resin (Lewatit VP OC 1026, named VP1026) and a cation IX resin (Lewatit TP 207, named TP207) for the sequential extraction of both metal ions from AMW (batch and column experiments).

Development of Inorganic Particle-Filled Polypropylene/High Density Polyethylene Membranes via Multilayer Co-Extrusion and Stretching.

This work is made to ascertain the effects of mineral fillers, namely calcium carbonate and talc, on the morphology and properties of multilayer polypropylene (PP)/high-density polyethylene (HDPE) porous membranes. Multilayer membranes were prepared using the three-stage Melt-Extrusion, Annealing and Uniaxial Stretching (MEAUS) process. The orientation of PP's crystalline phase was affected by both the flow-induced crystallization and the heterogeneous nucleation promoted by the fillers.

Robust estimation of diagnostic rate and real incidence of COVID-19 for European policymakers.

Policymakers need clear, fast assessment of the real spread of the COVID-19 epidemic in each of their respective countries. Standard measures of the situation provided by the governments include reported positive cases and total deaths. While total deaths indicate immediately that countries like Italy and Spain had the worst situation as of mid-April, 2020, reported cases alone do not provide a complete picture of the situation.

Leveraging Data Science for a Personalized Haemodialysis.

Background: The 2019 Science for Dialysis Meeting at Bellvitge University Hospital was devoted to the challenges and opportunities posed by the use of data science to facilitate precision and personalized medicine in nephrology, and to describe new approaches and technologies. The meeting included separate sections for issues in data collection and data analysis. As part of data collection, we presented the institutional ARGOS e-health project, which provides a common model for the standardization of clinical practice.

Empirical model for short-time prediction of COVID-19 spreading.

The appearance and fast spreading of Covid-19 took the international community by surprise. Collaboration between researchers, public health workers, and politicians has been established to deal with the epidemic. One important contribution from researchers in epidemiology is the analysis of trends so that both the current state and short-term future trends can be carefully evaluated.

Influence of Acrylic Acid and Tert-Dodecyl Mercaptan in the Adhesive Performance of Water-Based Acrylic Pressure-Sensitive Adhesives.

Currently, pressure-sensitive adhesives (PSA) are used in more than 80% of all labels in the market today. They do not require any heat, solvent, or water to activate: It only takes light pressure to apply them to a product surface. Many products that come in glass bottles need labels that have staying power in harsh conditions.

Security and Privacy when Applying FAIR Principles to Genomic Information.

Making data Findable, Accessible, Interoperable and Reusable (FAIR) is a good approach when data needs to be shared. However, security and privacy are still critical aspects. In the FAIRification process, there is a need both for de-identification of data and for license attribution.

Unraveling response to temozolomide in preclinical GL261 glioblastoma with MRI/MRSI using radiomics and signal source extraction.

Glioblastoma is the most frequent aggressive primary brain tumor amongst human adults. Its standard treatment involves chemotherapy, for which the drug temozolomide is a common choice. These are heterogeneous and variable tumors which might benefit from personalized, data-based therapy strategies, and for which there is room for improvement in therapy response follow-up, investigated with preclinical models.

Comparison between experimental digital image processing and numerical methods for stress analysis in dental implants with different restorative materials.

The aim of this study is to evaluate the stresses transferred to peri-implant areas from single implants restored with different restorative materials and subjected to a static vertical load with low eccentricity. A total of 12 crowns were made with four types of materials: carbon fiber-composite, metal-ceramic, metal-composite, and full-metal, all of them cemented over a titanium abutment. Three different ways of approaching the problem have been used independently to verify the robustness of the conclusions.

Synthesis and Properties of Water-Based Acrylic Adhesives with a Variable Ratio of 2-Ethylhexyl Acrylate and n-Butyl Acrylate for Application in Glass Bottle Labels.

A series of Pressure-Sensitive Adhesives (PSAs) with different soft monomer compositions were prepared by using emulsion polymerization. The monomers used were acrylic acid (AA), n-butyl acrylate (n-BA) and 2-ethylhexyl acrylate (2-EHA). Maintaining the same acrylic acid fraction in all polymerizations, the n-BA/2-EHA weight ratio varied from 0 to 1.

GC-MS Metabolite Profile and Identification of Unusual Homologous Cannabinoids in High Potency Cannabis sativa.

Phytochemical investigation of the lipids extracted from seeds of by GC-MS showed 43 cannabinoids, 16 of which are new. The extract is dominated by Δ-tetrahydrocannabinolic acid (A) and its neutral derivative -Δ-tetrahydrocannabinol-C (THC) and -Δ-tetrahydrocannabinol-C isomers with an ethyl-pentyl branched chain together with minor amounts of -Δ-tetrahydrocannabinol with a methyl-pentyl C branched side chain were identified as new natural compounds. Four cannabichromene isomers with a C side chain are postulated to be derived from the double bond migration at the terminal isoprenyl unit.

Origin of tuberculosis in the Paleolithic predicts unprecedented population growth and female resistance.

Current data estimate the origin of Mycobacterium tuberculosis complex (MtbC) infection around 73,000 years before the common era (BCE), and its evolution to "modern" lineages around 46,000 BCE. Being MtbC a major killer of humanity, the question is how both species could persist. To answer this question, we have developed two new epidemiological models (SEIR type), adapted to sex dimorphism and comparing coinfection and superinfection for different MtbC lineages.

Integration of liquid-liquid membrane contactors and electrodialysis for ammonium recovery and concentration as a liquid fertilizer.

The accumulation of ammonia in water bodies can cause eutrophication and reduce water quality. Furthermore, 80% of the ammonia in the world is consumed as fertilizer, which makes it a resource that can be recovered under the circular economy concept. Then, ammonia from wastewater can be valorised for agricultural applications.

Towards Productive Cities: Environmental Assessment of the Food-Energy-Water Nexus of the Urban Roof Mosaic.

Cities are rapidly growing and need to look for ways to optimize resource consumption. Metropolises are especially vulnerable in three main systems, often referred to as the FEW (i.e.

Towards sustainable business models for electric vehicle battery second use: A critical review.

A global mass market adoption of electric vehicles (EVs) is still hindered by the high costs of lithium-ion batteries (LIBs). Repurposing degraded EV batteries in second use applications holds the potential to reduce first-cost impediments of EVs. New business models are emerging rapidly within the EV and battery second use (B2U) industries but they focus on economic aspects without integrating social and environmental dimensions.

Effects of Carbon Nanotubes/Graphene Nanoplatelets Hybrid Systems on the Structure and Properties of Polyetherimide-Based Foams.

Foams based on polyetherimide (PEI) with carbon nanotubes (CNT) and PEI with graphene nanoplatelets (GnP) combined with CNT were prepared by water vapor induced phase separation. Prior to foaming, variable amounts of only CNT (0.1⁻2.

Blood Pressure Assessment with Differential Pulse Transit Time and Deep Learning: A Proof of Concept.

Background: Modern clinical environments are laden with technology devices continuously gathering physiological data from patients. This is especially true in critical care environments, where life-saving decisions may have to be made on the basis of signals from monitoring devices. Hemodynamic monitoring is essential in dialysis, surgery, and in critically ill patients.

Societal Issues Concerning the Application of Artificial Intelligence in Medicine.

Background: Medicine is becoming an increasingly data-centred discipline and, beyond classical statistical approaches, artificial intelligence (AI) and, in particular, machine learning (ML) are attracting much interest for the analysis of medical data. It has been argued that AI is experiencing a fast process of commodification. This characterization correctly reflects the current process of of AI and its reach into society.

Seat Occupancy Detection Based on a Low-Power Microcontroller and a Single FSR.

This paper proposes a microcontroller-based measurement system to detect and confirm the presence of a subject in a chair. The system relies on a single Force Sensing Resistor (FSR), which is arranged in the seat of the chair, that undergoes a sudden resistance change when a subject/object is seated/placed over the chair. In order to distinguish between a subject and an inanimate object, the system also monitors small-signal variations of the FSR resistance caused by respiration.