Laser ultrasound wave pattern analysis for efficient defect detection in samples with curved surfaces.

Many production processes involve curved sample surfaces, such as welding or additive manufacturing. These pose new challenges to characterization methods for quality inspection, which are usually optimized for flat extended sample geometries. In this paper, we present a laser ultrasound (LUS) method that can be used to efficiently detect defects (e.

Efficient testing of weld seam models with radii of curvature in the millimeter range using laser ultrasound.

Laser ultrasound is a widely used tool for industrial quality assurance when a contactless and fast method is required. In this work, we used a laboratory setup based on a confocal Fabry-Perot interferometer to examine weld seam models. The focus was placed on small samples with curved surfaces (small in the sense that the radius of curvature is comparable to the largest ultrasonic wavelength) and on efficient ways to detect the presence and volume of process pores, with the goal to transfer this method to industrial applications.

Vitrification of Mouse Blastocysts by Open or Closed System and Warming in Sucrose-containing or Sucrose-free Diluent.

Background: Cryopreservation of embryos is of considerable relevance for the implementation of embryo transfer programs and the establishment of embryo banks in several mammalian species.

Objective: The present investigation compares two different vitrification systems and two different warming solutions.

Materials And Methods: Vitrification was performed using Open Pulled Straw (OPS) or CVM RingFibre plug (CVM) devices.

TGV-regularized inversion of the Radon transform for photoacoustic tomography.

We propose and study a reconstruction method for photoacoustic tomography (PAT) based on total generalized variation (TGV) regularization for the inversion of the slice-wise 2D-Radon transform in 3D. The latter problem occurs for recently-developed PAT imaging techniques with parallelized integrating ultrasound detection where projection data from various directions is sequentially acquired. As the imaging speed is presently limited to 20 seconds per 3D image, the reconstruction of temporally-resolved 3D sequences of, e.

Modeling photoacoustic imaging with a scanning focused detector using Monte Carlo simulation of energy deposition.

Photoacoustic imaging using a focused, scanning detector in combination with a pulsed light source is a common technique to visualize light-absorbing structures in biological tissue. In the acoustic resolution mode, where the imaging resolution is given by the properties of the transducer, there are various challenges related to the choice of sensors and the optimization of the illumination. These are addressed by linking a Monte Carlo simulation of energy deposition to a time-domain model of acoustic propagation and detection.

New MRI contrast agents based on silicon nanotubes loaded with superparamagnetic iron oxide nanoparticles.

This article describes the preparation and fundamental properties of a new possible material as a magnetic resonance imaging contrast agent based on the incorporation of preformed iron oxide (FeO) nanocrystals into hollow silicon nanotubes (Si NTs). Specifically, superparamagnetic FeO nanoparticles of two different average sizes (5 nm and 8 nm) were loaded into Si NTs of two different shell thicknesses (40 nm and 70 nm). To achieve proper aqueous solubility, the NTs were functionalized with an outer polyethylene glycol-diacid (600) moiety via an aminopropyl linkage.

Piezoelectric line detector array for photoacoustic tomography.

Photoacoustic tomography relies on a dense coverage of the surface surrounding the imaged object with ultrasound sensors in order to enable an accurate reconstruction. A curved arrangement of integrating line sensors is proposed that is able to acquire data for a linear projection image of the absorbed energy density distribution in the object. Upon rotation of the object relative to the array, three-dimensional (3D) images can be obtained.

Porous Silicon Nanocomposites with Combined Hard and Soft Magnetic Properties.

Magnetic nanostructures of two ferromagnetic metals have been combined within porous silicon, and the magnetic switching behavior of the resulting porous silicon/metal nanocomposite has been modified by varying the arrangement. The two magnetic materials are Ni and Co, whereas Co is the magnetic harder one. These "hard/soft" magnetic nanocomposites have been achieved by two different routes.

Formation of Water Chains on CaO(001): What Drives the 1D Growth?

Formation of partly dissociated water chains is observed on CaO(001) films upon water exposure at 300 K. While morphology and orientation of the 1D assemblies are revealed from scanning tunneling microscopy, their atomic structure is identified with infrared absorption spectroscopy combined with density functional theory calculations. The latter exploit an ab initio genetic algorithm linked to atomistic thermodynamics to determine low-energy H2O configurations on the oxide surface.

Transient surface photovoltage studies of bare and Ni-filled porous silicon performed in different ambients.

Unlabelled: Mesoporous silicon and porous silicon/Ni nanocomposites have been investigated in this work employing light-dark surface photovoltage (SPV) transients to monitor the response of surface charge dynamics to illumination changes. The samples were prepared by anodization of a highly n-doped silicon wafer and a subsequent electrodepositing of Ni into the pores. The resulting pores were oriented towards the surface with an average pore diameter of 60 nm and the thickness of the porous layer of approximately 40 μm.

Magnetic interactions between metal nanostructures within porous silicon.

Unlabelled: Electrochemically deposited magnetic nanostructures arranged in a three-dimensional system are investigated with respect to their cross-talk between each other. The nanostructures are embedded in porous silicon templates with different morphologies which means pores offering dendritic growth of different strengths. An increase of the uniformity of the pores is concomitant with an increase of the smoothness of the metal deposits which strongly influences the magnetic behavior of the system.

Magnetic properties of superparamagnetic nanoparticles loaded into silicon nanotubes.

Unlabelled: In this work, the magnetic properties of silicon nanotubes (SiNTs) filled with Fe3O4 nanoparticles (NPs) are investigated. SiNTs with different wall thicknesses of 10 and 70 nm and an inner diameter of approximately 50 nm are prepared and filled with superparamagnetic iron oxide nanoparticles of 4 and 10 nm in diameter. The infiltration process of the NPs into the tubes and dependence on the wall-thickness is described.

Variable blocking temperature of a porous silicon/Fe3O4 composite due to different interactions of the magnetic nanoparticles.

In the frame of this work, the aim was to create a superparamagnetic nanocomposite system with a maximized magnetic moment when magnetized by an external field and a blocking temperature far below room temperature. For this purpose, iron oxide nanoparticles of 3.8-, 5- and 8-nm size have been infiltrated into the pores of porous silicon.

Porous silicon/Ni composites of high coercivity due to magnetic field-assisted etching.

Ferromagnetic nanostructures have been electrodeposited within the pores of porous silicon templates with average pore diameters between 25 and 60 nm. In this diameter regime, the pore formation in general is accompanied by dendritic growth resulting in rough pore walls, which involves metal deposits also offering a branched structure. These side branches influence the magnetic properties of the composite system not only due to modified and peculiar stray fields but also because of a reduced interpore spacing by the approaching of adjacent side pores.

Magnetically interacting low dimensional Ni-nanostructures within porous silicon.

Electrodeposition of ferromagnetic metals, a common method to fabricate magnetic nanostructures, is used for the incorporation of Ni structures into the pores of porous silicon templates. The porous silicon is fabricated in various morphologies with average pore-diameters between 40 and 95 nm and concomitant pore-distances between 60 and 40 nm. The metal nanostructures are deposited with different geometries as spheres, ellipsoids or wires influenced by the deposition process parameters.

Magnetic Nanoparticles Embedded in a Silicon Matrix.

This paper represents a short overview of nanocomposites consisting of magnetic nanoparticles incorporated into the pores of a porous silicon matrix by two different methods. On the one hand, nickel is electrochemically deposited whereas the nanoparticles are precipitated on the pore walls. The size of these particles is between 2 and 6 nm.

Weight factors for limited angle photoacoustic tomography.

Photoacoustic tomography (PAT) is based on the generation of ultrasound waves by heating an object with short light pulses. A three-dimensional image of the distribution of absorbed energy within the object is reconstructed from signals measured around the object with either point-like or extended, linear sensors. Limited angle artefacts arise when the curve or surface connecting neighbouring detectors is not closed around the object.

Heteroepitaxy of organic-organic nanostructures.

Highly crystalline organic heteroepitaxial layers with controlled molecular orientations and morphologies are one of the keys for optimum organic device performance. With studies of molecular orientation, structure, and morphology, we have investigated the ability of oriented organic films to act as substrate templates for the growth of a second organic layer. Depending on the molecular orientation in the sexiphenyl substrate, crystalline sexithiophene nanostructures of either pyramidal or needlelike morphology, with either near vertical or parallel molecular orientations, respectively, grow.

The annual course of TCA formation in the lower troposphere: a modeling study.

We present a modeling study investigating the influence of climate conditions and solar radiation intensity on gas-phase trichloroacetic acid (TCA) formation. As part of the ECCA-project (Ecotoxicological Risk in the Caspian Catchment Area), this modeling study uses climate data specific for the two individual climate regimes, namely "Kalmykia" and "Kola Peninsula". A third regime has also been included in this study, namely "Central Europe", which serves as a reference to somehow more moderate climate conditions.