Photobiomodulation Therapy Improves Repair of Bone Defects Filled by Inorganic Bone Matrix and Fibrin Heterologous Biopolymer.

Biomaterials are used extensively in graft procedures to correct bone defects, interacting with the body without causing adverse reactions. The aim of this pre-clinical study was to analyze the effects of photobiomodulation therapy (PBM) with the use of a low-level laser in the repair process of bone defects filled with inorganic matrix (IM) associated with heterologous fibrin biopolymer (FB). A circular osteotomy of 4 mm in the left tibia was performed in 30 Wistar male adult rats who were randomly divided into three groups: G1 = IM + PBM, G2 = IM + FB and G3 = IM + FB + PBM.

Tissue Bioengineering with Fibrin Scaffolds and Deproteinized Bone Matrix Associated or Not with the Transoperative Laser Photobiomodulation Protocol.

Extending the range of use of the heterologous fibrin biopolymer, this pre-clinical study showed a new proportionality of its components directed to the formation of scaffold with a lower density of the resulting mesh to facilitate the infiltration of bone cells, and combined with therapy by laser photobiomodulation, in order to accelerate the repair process and decrease the morphofunctional recovery time. Thus, a transoperative protocol of laser photobiomodulation (L) was evaluated in critical bone defects filled with deproteinized bovine bone particles (P) associated with heterologous fibrin biopolymer (HF). The groups were: BC (blood clot + laser); HF; HF; PHF (P+HF); PHF (P+HF+L).

Comparative analysis of male reproductive accessory glands in bats Histiotus velatus (Vespertilionidae), Molossus rufus (Molossidae), and Peropteryx leucoptera (Emballonuridae).

Despite the high number of species and wide geographic dispersion, reproductive accessory glands (RAGs) of bats have traditionally received little attention in the literature, with some species not even having a basic description of their composition and structure. Thus, this study aimed to analyze and compare the composition, anatomy, and histology of male RAGs of bat species belonging to three of the largest (cosmopolitan) bat families: Vespertilionidae (Histiotus velatus), Molossidae (Molossus rufus), and Emballonuridae (Peropteryx leucoptera), in order to understand the variations in the bat RAGs. The results showed that the RAGs of H.

Immobilization and Characterization of L-Asparaginase over Carbon Xerogels.

L-asparaginase (ASNase) is an aminohydrolase currently used in the pharmaceutical and food industries. Enzyme immobilization is an exciting option for both applications, allowing for a more straightforward recovery and increased stability. High surface area and customizable porosity make carbon xerogels (CXs) promising materials for ASNase immobilization.

Novel transdermal bioadhesive surfactant-based system for release and solubility improvement of antimalarial drugs artemether-lumefantrine.

Artemether (ART) and lumefantrine (LUM) are the gold standard antimalarial drugs used for the treatment of malaria in children and pregnant women. Typically, ART and LUM are delivered orally in the form of a combined tablet, however, the appropriateness of this route of administration for these drugs is questionable due to the poor absorption and therefore bioavailability observed unless administered alongside lipid-rich foods. Transdermal drug delivery in the form of a patch-type system has been identified as a viable alternative to the conventional tablet-based therapy.

Biomechanical Evaluation of Different Implant-Abutment Connections, Retention Systems, and Restorative Materials in the Implant-Supported Single Crowns Using 3D Finite Element Analysis.

This is an in silico study aimed to evaluate the biomechanical influence of different implant-abutment interfaces (external hexagon and Morse taper implants), retention systems (cement and screw retained), and restorative crowns (metal-ceramic and monolithic) using 3-dimensional finite element analysis (3D-FEA). Eight 3D models were simulated for the maxillary first molar area using InVesalius, Rhinoceros, and SolidWorks and processed using Femap and NEi Nastran software. Axial and oblique forces of 200 and 100 N, respectively, were applied on the occlusal surface of the prostheses.

The hormonal control of the uterus of the bat Myotis nigricans during its different reproductive phases: emphasis on progesterone and estradiol.

Myotis nigricans is a species of bat from the Vespertilionidae family that is endemic of the Neotropical region. Its insectivorous feeding habit plus its large range of prey species, great geographical dispersion, wide colonies, and anthropomorphized behavior make this species an important ecological agent that acts in the control of nocturnal insects. Reproductively, M.

Detection of the System and Resistance to Antimicrobials in Biofilm-Producing .

The ability of to produce virulence factors, such as biofilm, added to its increased resistance to antimicrobials can cause infections that are difficult to treat. Many staphylococcal virulence factors are under the control of the accessory gene regulator (). The objective of this study was to establish the locus and susceptibility of biofilm-producing specimens to antimicrobial agents, through PCR reactions, reverse transcription polymerase chain reaction (RT-PCR), and the determination of minimum inhibitory concentration (MIC), and to analyze the clonal profile of 300 strains isolated from blood culture specimens from inpatients at a University Hospital in Brazil, over a 20-year period by pulsed-field gel electrophoresis (PFGE) and multilocus sequence typing (MLST) techniques.

Antiarthritic and Antihyperalgesic Properties of Ethanolic Extract from Mart. (Amaranthaceae) Aerial Parts.

Mart. (Amaranthaceae) is used in folk medicine as a natural analgesic, and in Brazil, the species of genus is used for rheumatism. However, scientific evidence which supports its popular use as an analgesic is scarce.

Comparison of conventional and extractive fermentation using aqueous two-phase system to extract fibrinolytic proteases produced by DPUA 1729.

Fibrinolytic enzymes have been considered promising for treatment and protection of healthy circulation due its ability to dissolve the fibrin in blood clots. Extractive fermentation is a not explored and efficient downstream process which segregates the desired product simultaneously in a fermentation process fast and economically. Extraction of fibrinolytic enzymes by DPUA 1729 employing conventional aqueous two-phase systems (ATPS) and extractive fermentation with ATPS was evaluated.

Development and characterization of a novel l-asparaginase/MWCNT nanobioconjugate.

The enzyme l-asparaginase (ASNase) presents effective antineoplastic properties used for acute lymphoblastic leukemia treatment besides their potential use in the food sector to decrease the acrylamide formation. Considering their applications, the improvement of this enzyme's properties by efficient immobilization techniques is in high demand. Carbon nanotubes are promising enzyme immobilization supports, since these materials have increased surface area and effective capacity for enzyme loading.

Influence of anti-allergic drugs used systemically on the process of root resorption during delayed tooth replantation: A study in rats.

Background/aim: Anti-allergic drugs can inhibit the hard tissue resorption process, and due to similarities between root resorption and bone mechanisms, it can be inferred that these drugs may also control root resorption. The aim of this study was to analyze the effects of anti-allergic drugs used systemically on the process of root resorption following delayed tooth replantation.

Materials And Methods: Thirty-two maxillary right incisors of rats were extracted and subsequently replanted.

Dressing Tool Condition Monitoring through Impedance-Based Sensors: Part 1-PZT Diaphragm Transducer Response and EMI Sensing Technique.

Low-cost piezoelectric lead zirconate titanate (PZT) diaphragm transducers have attracted increasing attention as effective sensing devices, based on the electromechanical impedance (EMI) principle, for applications in many engineering sectors. Due to the considerable potential of PZT diaphragm transducers in terms of excellent electromechanical coupling properties, low implementation cost and wide-band frequency response, this technique provides a new alternative approach for tool condition monitoring in grinding processes competing with the conventional and expensive indirect sensor monitoring methods. This paper aims at assessing the structural changes caused by wear in single-point dressers during their lifetime, in order to ensure the reliable monitoring of the tool condition during dressing operations.

Dressing Tool Condition Monitoring through Impedance-Based Sensors: Part 2-Neural Networks and K-Nearest Neighbor Classifier Approach.

This paper presents an approach for impedance-based sensor monitoring of dressing tool condition in grinding by using the electromechanical impedance (EMI) technique. This method was introduced in Part 1 of this work and the purpose of this paper (Part 2) is to achieve an optimal selection of the excitation frequency band based on multi-layer neural networks (MLNN) and k-nearest neighbor classifier (-NN). The proposed approach was validated on the basis of dressing tool condition information obtained from the monitoring of experimental dressing tests with two industrial stationary single-point dressing tools.

Data Summarization in the Node by Parameters (DSNP): Local Data Fusion in an IoT Environment.

With the advent of the Internet of Things, billions of objects or devices are inserted into the global computer network, generating and processing data at a volume never imagined before. This paper proposes a way to collect and process local data through a data fusion technology called summarization. The main feature of the proposal is the local data fusion, through parameters provided by the application, ensuring the quality of data collected by the sensor node.

First Time Determination of Important Catalyst Sodium Methoxide Used in Biodiesel by Colorimetric Method.

A simple and selective spectrophotometric method has been developed for the first time for the determination of sodium methoxide in methanol solution in the presence of sodium hydroxide. The developed method involves the formation of a pink species by the reaction between sodium methoxide and α-santonin. The pink compound formed shows absorbance maximum at 513 nm.

The influence of axle position and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion.

Introduction: Wheelchair configuration is an important factor influencing the ergonomics of the user-device interface and, from a biomechanical point of view, small changes in chair setup may have a positive influence on the demand on the upper limbs during manual propulsion. This study aimed to investigate the influence of the position of the rear wheels' axle and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion.

Methods: Electromyography signals of the biceps, triceps, anterior deltoids and pectoralis major were collected for 11 able-bodied subjects in a wheelchair propulsion protocol with four different wheelchair configurations (differing in axle position and the use of accessories) on a straightforward sprint and a slalom course.

Two-Year Clinical Evaluation of a Nanofilled Etch-and-Rinse and a Self-Etch Adhesive System Containing MDPB and Fluoride in Non-carious Cervical Lesions.

Objectives: The aim of this clinical study was to evaluate the performance of restorations for non-carious cervical lesions performed with a two-step etch-and-rinse or with a two-step self-etch adhesive.

Materials And Methods: The teeth to be restored (15 patients, N = 90 restorations) were randomly assigned into 3 groups (n = 30), according to the adhesive system: group 1 (G1): Peak LC Bond; group 2 (G2): Clearfil Protect Bond; and group 3 (G3): prior selective acid etching of the enamel margins before bonding with Clearfil Protect Bond. The NCCLs were restored with Amelogen Plus composite resin.

Thermodynamics of a time-dependent and dissipative oval billiard: A heat transfer and billiard approach.

We study some statistical properties for the behavior of the average squared velocity-hence the temperature-for an ensemble of classical particles moving in a billiard whose boundary is time dependent. We assume the collisions of the particles with the boundary of the billiard are inelastic, leading the average squared velocity to reach a steady-state dynamics for large enough time. The description of the stationary state is made by using two different approaches: (i) heat transfer motivated by the Fourier law and (ii) billiard dynamics using either numerical simulations and theoretical description.

Evaluation of herbicides action on plant bioindicators by genetic biomarkers: a review.

The use of pesticides has increased worldwide, owing to the demand for products of good quality and to satisfy a growing population. Herbicides represent almost half of the total amount of pesticides used. Although important to the reduction of costs and an increase of productivity, their indiscriminate use, as well as that of the other pesticides, is a global environmental problem, since they affect the living organisms.

Factors associated with equine aural plaque in Brazil.

Background: Aural plaques can be found on the inner surfaces of one or both ears of horses. Despite their low malignancy, these lesions can sometimes cause discomfort and sensitivity in horses, and a loss in commercial value due to their aesthetic effect. There has been a study describing the epidemiological features and the clinical prevalence of equine aural plaques in Brazil.

Failure modes of Y-TZP abutments with external hex implant-abutment connection determined by fractographic analysis.

Yttria-stabilized tetragonal zirconia (Y-TZP) was introduced as ceramic implant abutments due to its excellent mechanical properties. However, the damage patterns for Y-TZP abutments are limited in the literature. Fractographic analyses can provide insights as to the failure origin and related mechanisms.

The Prodrug Approach: A Successful Tool for Improving Drug Solubility.

Prodrug design is a widely known molecular modification strategy that aims to optimize the physicochemical and pharmacological properties of drugs to improve their solubility and pharmacokinetic features and decrease their toxicity. A lack of solubility is one of the main obstacles to drug development. This review aims to describe recent advances in the improvement of solubility via the prodrug approach.

A Nanostructured Lipid System as a Strategy to Improve the in Vitro Antibacterial Activity of Copper(II) Complexes.

The aim of this study was to construct a nanostructured lipid system as a strategy to improve the in vitro antibacterial activity of copper(II) complexes. New compounds with the general formulae [CuX₂(INH)₂]·nH₂O (X = Cl(-) and n = 1 (1); X = NCS(-) and n = 5 (2); X = NCO(-) and n = 4 (3); INH = isoniazid, a drug widely used to treat tuberculosis) derived from the reaction between the copper(II) chloride and isoniazid in the presence or absence of pseudohalide ions (NCS(-) or NCO(-)) were synthesized and characterized by infrared spectrometry, electronic absorption spectroscopy, electron paramagnetic resonance (EPR) spectroscopy, elemental analysis, melting points and complexometry with 2,2',2'',2'''-(Ethane-1,2-diyldinitrilo)tetraacetic acid (EDTA). The characterization techniques allowed us to confirm the formation of the copper(II) complexes.