High Efficiency Membranes Based on PTMSP and Hyper-Crosslinked Polystyrene for Toxic Volatile Compounds Removal from Wastewater.

For the first time, membranes based on poly(1-trimethylsilyl-1-propyne) (PTMSP) with 5-50 wt% loading of hyper-crosslinked polystyrene sorbent particles (HCPS) were obtained; the membranes were investigated for the problem of effective removal of volatile organic compounds from aqueous solutions using vacuum pervaporation. The industrial HCPS sorbent Purolite Macronet™ MN200 was chosen due to its high sorption capacity for organic solvents. It has been found that the membranes are asymmetric when HCPS content is higher than 30 wt%; scanning electron microscopy of the cross-sections the membranes demonstrate that they have a clearly defined thin layer, consisting mainly of PTMSP, and a thick porous layer, consisting mainly of HCPS.

Anticancer activity of G4-targeting phenoxazine derivatives in vitro.

G4-stabilizing ligands are now being considered as anticancer, antiviral and antibacterial agents. Phenoxazine is a promising scaffold for the development of G4 ligands. Here, we profiled two known phenoxazine-based nucleoside analogs and five new nucleoside and non-nucleoside derivatives against G4 targets from telomere repeats and the KIT promoter region.

Fabrication of Polyacrylonitrile UF Membranes by VIPS Method with Acetone as Co-Solvent.

For the first time, a systematic study was carried out of the replacement of the low-volatility solvents N-methyl-2-pyrrolidone (NMP) or dimethylsulfoxide (DMSO) with the high-volatility solvent acetone in the casting solution of polyacrylonitrile (PAN). The effect of acetone's presence in the casting solution on the performance of ultrafiltration membranes fabricated via vapor-induced phase separation (VIPS) was investigated. It was possible to replace 40% of NMP and 50% of DMSO with acetone, which resulted in the reduction of the casting solution viscosity from 70.

The Use of Branching Agents in the Synthesis of PBAT.

Biodegradable polyesters represent an advanced alternative to polyolefin plastics in various applications. Polybutylene adipate terephthalate (PBAT) can compete with polyolefins in terms of their mechanical characteristics and melt processing conditions. The properties of PBAT depend on the molecular weight, dispersity, and architecture of the copolymer.

Hydrophobic Ag-Containing Polyoctylmethylsiloxane-Based Membranes for Ethylene/Ethane Separation in Gas-Liquid Membrane Contactor.

The application of gas-liquid membrane contactors for ethane-ethylene separation seems to offer a good alternative to conventional energy-intensive processes. This work aims to develop new hydrophobic composite membranes with active ethylene carriers and to demonstrate their potential for ethylene/ethane separation in gas-liquid membrane contactors. For the first time, hybrid membrane materials based on polyoctylmethylsiloxane (POMS) and silver tetrafluoroborate, with a Si:Ag ratio of 10:0.

Evaluation of Zeolite Acidity by P MAS NMR Spectroscopy of Adsorbed Phosphine Oxides: Quantitative or Not?

P magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy of adsorbed alkyl-substituted phosphine oxides has witnessed tremendous progress during the last years and has become one of the most informative and sensitive methods of zeolite acidity investigation. However, quantitative evaluation of the number of sites is still a challenge. This study clarifies the main origin of errors occurring during NMR experiments, introduces the appropriate standards (both internal and external), and determines the relaxation parameters and the conditions for the acquisition and integration of spectra.

Copper coordination compounds with (5,5')-2,2'-(alkane-α,ω-diyldiselenyl)-bis-5-(2-pyridylmethylene)-3,5-dihydro-4-imidazol-4-ones. Comparison with sulfur analogue.

A series of new organic ligands (5,5')-2,2'-(alkane-α,ω-diyldiselenyl)-bis-5-(2-pyridylmethylene)-3,5-dihydro-4-imidazol-4-ones (L) consisting of two 5-(2-pyridylmethylene)-3,5-dihydro-4-imidazol-4-one units linked with polymethylene chains of various lengths ( = 2-10, where is the number of CH units) have been synthesized. The reactions of these ligands with CuCl·2HO and CuClO·6HO gave Cu or Cu containing mono- and binuclear complexes with CuLCl ( = 2-4) or CuL(ClO) ( = 1, 2) composition. It was shown that the agents reducing Cu to Cu in the course of complex formation can be both a ligand and an organic solvent in which the reaction is carried out.

Recovery of Model Pharmaceutical Compounds from Water and Organic Solutions with Alginate-Based Composite Membranes.

In this work, we combined the non-solvent induced phase separation (NIPS) and further cross-linking by cations towards the preparation of nanofiltration membranes based on sodium alginate, a biodegradable, natural polymer. Acetone, ethanol, toluene, and hexane were used as non-solvents, and cations of calcium, silver, and aluminum-for polymer cross-linking, respectively. Results showed the precipitation strength of non-solvent played a noticeable role in the membrane's performance; for instance, the toluene permeability changed by four orders of magnitude with the decrease of precipitation strength of the non-solvent: acetone ( = 0.

Designing 3D Membrane Modules for Gas Separation Based on Hollow Fibers from Poly(4-methyl-1-pentene).

Designing hollow fiber (HF) membrane modules occupies one of the key positions in the development of efficient membrane processes for various purposes. In developing HF membrane modules, it is very important to have a uniform HF distribution and flow mixing in the shell side to significantly improve mass transfer and efficiency. This work suggests the application of different textile 3D HF structures (braided hoses and woven tape fabrics).

Novel Mixed Matrix Membranes Based on Polymer of Intrinsic Microporosity PIM-1 Modified with Metal-Organic Frameworks for Removal of Heavy Metal Ions and Food Dyes by Nanofiltration.

Nowadays, nanofiltration is widely used for water treatment due to its advantages, such as energy-saving, sustainability, high efficiency, and compact equipment. In the present work, novel nanofiltration membranes based on the polymer of intrinsic microporosity PIM-1 modified by metal-organic frameworks (MOFs)-MIL-140A and MIL-125-were developed to increase nanofiltration efficiency for the removal of heavy metal ions and dyes. The structural and physicochemical properties of the developed PIM-1 and PIM-1/MOFs membranes were studied by the spectroscopic technique (FTIR), microscopic methods (SEM and AFM), and contact angle measurement.

Features of the Gas-Permeable Crystalline Phase of Poly-2,6-dimethylphenylene Oxide.

Poly-2,6-dimethylphenylene oxide (PPO) film samples with varying degrees of crystallinity (from 0 to 69%) were obtained by means of different techniques. The films were studied by various physicochemical methods (Fourier-transform infrared spectroscopy, positron annihilation lifetime spectroscopy, X-ray diffraction, and H nuclear magnetic resonance relaxation). Solubility coefficients of gases in the PPO samples were measured via sorption isotherms of gases by volumetric technique with chromatographic detection.

Self-assembly of hydrophobic-amphiphilic diblock copolymers in solution.

Thermoresponsive polymers are usually characterized by a locally amphiphilic chain structure and their self-assembly in solution is controlled, in particular, by the surface activity of the monomer units or side chains. We theoretically study the condensed state of a single diblock copolymer molecule consisting of a hydrophobic block and amphiphilic block with hydrophobic groups in the backbone and pendant polar groups. The equilibrium parameters of the polymer globules of different shapes are determined using the mean-field approach to determine the most favorable structure.

Tandem Synthesis of Ultra-High Molecular Weight Drag Reducing Poly-α-Olefins for Low-Temperature Pipeline Transportation.

Ultra-high molecular weight poly-α-olefins are widely used as drag reducing agents (DRAs) for pipeline transportation of oil and refined petroleum products. The synthesis of polyolefin DRAs is based on low-temperature Ziegler-Natta (ZN) polymerization of higher α-olefins. 1-Hexene based DRAs, the most effective at room temperature, typically lose DR activity at low temperatures.

Preparation and properties of GC capillary column with hypercrosslinked stationary phase.

For the first time, highly porous hypercrosslinked polystyrene layer was synthesized within a gas chromatography capillary column and successfully deposited onto the capillary walls generating porous layer open-tubular capillary column. Elaborated three steps synthetic procedure provides tightly bonded porous polymeric layer and ensues complete elimination of particle shedding and the needs for particle traps. Due to highly developed surface area, porous layer open-tubular column provides strong solute retention that is useful for the separation of various volatile solvents and light gas compounds including ethane, ethylene, ethyne.

Influence of Spin Coating Parameters on Gas Transport Properties of Thin-Film Composite Membranes.

The influence of casting centrifugation process parameters, such as a rotation speed (ω), the amount of the film-forming solution (V), and its concentration (C) on transport properties of composite membranes were investigated. A number of composite membranes based on poly (1-trimethylsilylpropyne) (PTMSP) and micro- (MFFK-1) and ultrafiltration (UFFK) membranes were obtained using the spin-coating method. For the first time, an unexpected dependence of permeance and ideal selectivity on rotation speed had been discovered: the thickness of the selective layer decreases from 3.

EGCG as an anti-SARS-CoV-2 agent: Preventive versus therapeutic potential against original and mutant virus.

In the search for anti-SARS-CoV-2 drugs, much attention is given to safe and widely available native compounds. The green tea component epigallocatechin 3 gallate (EGCG) is particularly promising because it reportedly inhibits viral replication and viral entry in vitro. However, conclusive evidence for its predominant activity is needed.

Antibacterial Poly(ε-CL)/Hydroxyapatite Electrospun Fibers Reinforced by Poly(ε-CL)--poly(ethylene phosphoric acid).

In bone surgery and orthopedics, bioresorbable materials can be helpful in bone repair and countering post-op infections. Explicit antibacterial activity, osteoinductive and osteoconductive effects are essential to achieving this objective. Nonwoven electrospun (ES) fibers are receiving the close attention of physicians as promising materials for wound dressing and tissue engineering; potentially, in high contrast with dense materials, ES mats hamper regeneration of the bone extracellular matrix to a lesser extent.

DNA G-Quadruplexes Contribute to CTCF Recruitment.

G-quadruplex (G4) sites in the human genome frequently colocalize with CCCTC-binding factor (CTCF)-bound sites in CpG islands (CGIs). We aimed to clarify the role of G4s in CTCF positioning. Molecular modeling data suggested direct interactions, so we performed in vitro binding assays with quadruplex-forming sequences from CGIs in the human genome.

Hybrid Microporous Polymeric Materials with Outstanding Permeability and Increased Gas Transport Stability: PTMSP Aging Prevention by Sorption of the Polymerization Catalyst on HCPS.

The influence of hyper-crosslinked polystyrene (HCPS) Macronet MN200 on the gas transport properties and aging of the highly permeable glassy polymer poly(1-trimethylsilyl-1-propyne) (PTMSP) was studied and analyzed in detail. The gas transport characteristics of dense PTMSP membranes containing 0-10.0 wt % HCPS were studied.

Phenoxazine pseudonucleotides in DNA i-motifs allow precise profiling of small molecule binders by fluorescence monitoring.

The lack of high throughput screening (HTS) techniques for small molecules that stabilize DNA iMs limits their development as perspective drug candidates. Here we showed that fluorescence monitoring for probing the effects of ligands on the iM stability using the FAM-BHQ1 pair provides incorrect results due to additional dye-related interactions. We developed an alternative system with fluorescent phenoxazine pseudonucleotides in loops that do not alter iM unfolding.

Polymer Cold-Flow Improvers for Biodiesel.

In recent decades, biodiesel has been explored as a prospective comparable fuel to petroleum diesel for compression ignition engines. However, several drawbacks have limited the wide application of biodiesel as motor fuel, and the poor cold-flow property is one of the major problems. This problem is compounded by the diversity of the biodiesel characteristics arising from a variety of chemical compositions of biodiesel from different sources.

Activation of Pd-precatalysts by organic compounds for vinyl-addition polymerization of a norbornene derivative.

An approach to activating Pd-complexes without using additives such as Lewis acids has been developed for addition polymerization of norbornenes. Aryl iodides and aryl diazonium salts were efficiently applied as cocatalysts to Pd(0)- and Pd(2+)-complexes. The developed systems catalyzed polymerization of norbornenes containing bulky and polar functional groups both in an inert atmosphere and air resulting in soluble and high-molecular-weight saturated polymers.

Functionalized Biodegradable Polymers via Termination of Ring-Opening Polymerization by Acyl Chlorides.

Aliphatic polyesters are an important class of polymeric materials for biomedical applications due to their versatile and tunable chemistry, biocompatibility and biodegradability. A capability of direct bonding with biomedically significant molecules, provided by the presence of the reactive end functional groups (FGs), is highly desirable for prospective polymers. Among FGs, N-hydroxysuccinimidyl activated ester group (NHS) and maleimide fragment (MI) provide efficient covalent bonding with -NH- and -SH containing compounds.

Operation of Three-Stage Process of Lithium Recovery from Geothermal Brine: Simulation.

Lithium-rich geothermal waters are considered as an alternative source, and further concentration of lithium is required for its effective recovery. In this work, we have simulated a three-stage lithium recovery process including the brine softening by precipitation Ca/Mg cations with sodium carbonate (calculated in PHREEQC), followed by an integrated system consisting of membrane distillation unit (water evaporation), crystallizer (NaCl precipitation), and membrane extraction (Li recovery), which was simulated in Simulink/MATLAB. It was shown that the deterioration of membrane performance in time due to scaling/fouling plays a critical role in the performance of the system resulting in the dramatic increase of the replaced membrane modules by a factor of 5.

A New Approach to Developing Long-Acting Injectable Formulations of Anti-HIV Drugs: Poly(Ethylene Phosphoric Acid) Block Copolymers Increase the Efficiency of Tenofovir against HIV-1 in MT-4 Cells.

Despite the world's combined efforts, human immunodeficiency virus (HIV), the causative agent of AIDS, remains one of the world's most serious public health challenges. High genetic variability of HIV complicates the development of anti-HIV vaccine, and there is an actual clinical need for increasing the efficiency of anti-HIV drugs in terms of targeted delivery and controlled release. Tenofovir (TFV), a nucleotide-analog reverse transcriptase inhibitor, has gained wide acceptance as a drug for pre-exposure prophylaxis or treatment of HIV infection.