Aero-TiO three-dimensional nanoarchitecture for photocatalytic degradation of tetracycline.

One of the biggest issues of wide bandgap semiconductor use in photocatalytic wastewater treatment is the reusability of the material and avoiding the contamination of water with the material itself. In this paper, we report on a novel TiO aeromaterial (aero-TiO) consisting of hollow microtetrapods with ZnTiO inclusions. Atomic layer deposition has been used to obtain particles of unique shape allowing them to interlock thereby protecting the photocatalyst from erosion and damage when incorporated in active filters.

Investigation of factors affecting the sound absorption behaviour of 3D printed hexagonal prism lattice polyamide structures.

The aim of this work is to investigate the sound absorption properties of open-porous polyamide 12 (PA12) structures produced using Selective Laser Sintering (SLS) technology. The examined 3D-printed samples, fabricated with hexagonal prism lattice structures, featured varying thicknesses, cell sizes, and orientations. Additionally, some samples were produced with an outer shell to evaluate its impact on sound absorption.

Bacterial Cellulose/Graphene Oxide/Hydroxyapatite Biocomposite: A Scaffold from Sustainable Sources for Bone Tissue Engineering.

Bone tissue engineering demands advanced biomaterials with tailored properties. In this regard, composite scaffolds offer a strategy to integrate the desired functionalities. These scaffolds are expected to provide sufficient cellular activities while maintaining the required strength necessary for the bone repair for which they are intended.

Highly catalytically active composite of palladium nanoparticles covalently bound to chitosan nanofibers via dialdehyde cellulose.

This study introduces a novel, sustainable method for synthesizing sub-5 nm palladium nanoparticles (PdNPs) and covalently binding them to chitosan nanofibers (CHITs) using fully oxidized dialdehyde cellulose (DAC). Notably, the DAC acts not only as a reducing and stabilizing agent for PdNPs, but also as a linker for their rapid and spontaneous covalent attachment to CHITs via Schiff base chemistry. This unique approach yields PdNPs with a narrow size distribution (4.

Occurrence of Stress and Burnout Among Nurses Employed in a Psychiatric Hospital and a Somatic Hospital-A Comparative Analysis (Nursing Workload KEGA č. 011KU-4/2024).

Work-related stress has been linked to various negative outcomes among healthcare professionals. For nurses, stress can arise from numerous sources, including their interactions with patients. It is often perceived that nurses working in psychiatric hospitals experience greater stress and occupational burnout compared to nurses working in somatic hospitals.

The Release of Organic Acids and Low Molecular Weight Carbohydrates from Matcha Tea After In Vitro Digestion.

Background/objectives: This study tested the influence of in vitro digestion on the release of organic acids and low molecular weight saccharides of matcha.

Methods: The concentrations of analytes in the raw and undigested portion of matcha were measured using HPLC with spectrometric and refractometric detection to establish their residual values after a two-step enzymatic digestion that was finally presented as a retention factor.

Results: It was established that dry matter digestibility values after simulated gastric and both gastric and intestinal phases were 67.

Effect of Gentamicin-Loaded Calcium Phosphate Coating and Polymeric Coating on the Degradation Properties of Biodegradable Iron-Based Biomaterials.

In the past decades, iron has been one of the intensively studied biodegradable metals due to its suitable mechanical properties, but it suffers from slow degradation in a physiological environment and low bioactivity. In this work, the beneficial properties of ceramic and polymer coatings were merged to enhance the corrosion properties and biological compatibility of Fe-based biomaterials. A new bilayer coating for Fe-based biomaterials that speeds up degradation while offering controlled, localized drug release to prevent infections was prepared.

Comparing self-regulation strategies among adult learners from Poland, Serbia, Slovakia, and the Czech Republic.

An active and constructive process whereby individuals possess the ability to develop, implement, and flexibly maintain planned behavior in order to achieve a desired achievement goal is referred to as self-regulation. The aim of the present study is to examine the factorial structure and psychometric properties of the Self-Regulation Questionnaire, validated in the Czech educational context (SRQ-CZ). The other target is to identify any usage of self-regulation strategies which may differ as nationality, gender, age, education, and internal motivation to learn come into play.

Prediction of potential occurrence of historical objects with defensive function in Slovakia using machine learning approach.

In this article, we aim at the prediction of possible locations of already defunct historical objects with a defensive function (HODFs) in Slovakia, which have not been found and documented so far, using three machine learning methods. Specifically, we used the support vector machine, k-nearest neighbors, and random forest algorithms, which were trained based on the following five factors influencing the possible occurrence of HODFs: elevation, distance from a river, distance from a settlement, lithological rock type, and type of representative geoecosystems. Training and testing datasets were based on a database of already documented 605 HODFs, which were divided into 70% of training samples and 30% of testing samples.

Simulation and Experimental Study on Enhancing Dimensional Accuracy of Polycarbonate Light Guides.

This research investigates the adaptation of conventional injection-molding techniques for producing thick-walled polycarbonate optical components, specifically targeting their application in automotive light guides. With the automotive industry's growing demand for reliable yet cost-efficient optical products, the study examines how traditional injection-molding processes can be refined to enhance dimensional accuracy and reduce defects. Simulations and experimental trials were conducted to evaluate the impact of critical process parameters, such as melt temperature, mold temperature, injection pressure, and gate design, on the overall quality of the final components.

Advanced Technologies for Enhancing Structure and Functions of Films and Coatings.

This Special Issue, titled Advanced Technologies for Enhancing Structure and Functions of Films and Coatings, covers current trends that revolve around sustainability, multifunctionality, and the integration of smart materials [...

Allosteric release of cucurbit[6]uril from a rotaxane using a molecular signal.

Rotaxanes can be regarded as storage systems for their wheel components, which broadens their application potential as a complement to the supramolecular systems that retain a mechanically interlocked structure. However, utilising rotaxanes in this way requires a method to release the wheel while preserving the integrity of all molecular constituents. Herein, we present simple rotaxanes based on cucurbit[6]uril (CB6), with an axis equipped with an additional binding motif that enables the binding of another macrocycle, cucurbit[7]uril (CB7).

Traffic safety at level crossings in the Czech Republic.

The article deals with the issue of evaluation of the causes of accidents at level crossings in the Czech Republic, including the prediction of the development and proposals of measures for prevention and thus reduction of their number. The goal of this work is to verify the hypothesis that the number of accidents at level crossings in the Czech Republic is decreasing. The authors use available data from the Ministry of Transport and process statistical data for ten years (2013-2022) of railway operation.

Effects of Environmental Temperature and Trapped Air Bubbles on the Mechanical Properties of Ice Cubes.

Ice is a widespread material in natural and industrial fields. Trapped air bubbles form in ice cubes due to the differences in the solubility of air in ice and water, which directly affects the mechanical strength of the ice cubes. To investigate the effects of environmental temperature and trapped air bubbles on the mechanical properties of ice cubes, a series of experiments are designed and carried out.

Recycling industrial waste polymer as a binder system for ceramic injection molding feedstock.

Ceramic injection molding is a widely used manufacturing process for producing high-precision ceramic components. However, the high cost of traditional binder systems, as well as non-ecological aspects of these binders, may limit its broader applications. This study investigates the potential use of polyvinyl butyral industrial waste containing plasticizer as a sustainable alternative binder system for ceramic injection molding, utilizing alumina powder with a mean particle size of 0.

Biocompatibility of colloidal polypyrrole.

The excellent electroconductive properties of polypyrrole (PPy) predetermine its use as cell-instructive or biosensing biomaterial. PPy has potential for application in a physiological environment, and here the cytotoxicity, antioxidant capacity, modulation of neutrophil oxidative burst, antibacterial activity of colloidal PPy stabilized with polyvinylpyrrolidone (PVP), and long-term stability under physiological conditions are reported. Besides, long-term stability under physiological conditions is also provided.

The emotional profile of Slovak freshmen in teaching English as a foreign language.

The article focuses on tracing changes in Slovak pre-service TEFL student teachers' emotional states over the first semester of their university study and detecting possible factors inciting their emotions. It highlights the importance of understanding these emotional states as they significantly impact students' perceptions of their suitability as educators. A mixed-methods approach was employed to collect qualitative and quantitative data through questionnaires, reflections, and interviews.

Optimizing Low-Cost Gas Analysis with a 3D Printed Column and MiCS-6814 Sensor for Volatile Compound Detection.

This paper explores an application of 3D printing technology on the food industry. Since its inception in the 1980s, 3D printing has experienced a huge rise in popularity. This study uses cost-effective, flexible, and sustainable components that enable specific features of certain gas chromatography.

Smart Biopolymer Scaffolds Based on Hyaluronic Acid and Carbonyl Iron Microparticles: 3D Printing, Magneto-Responsive, and Cytotoxicity Study.

This study deals with utilization of the hyaluronic acid (HA) and carbonyl iron (CI) microparticles to fabricate the magneto-responsive hydrogel scaffolds that can provide triggered functionality upon application of an external magnetic field. The various combinations of the HA and CI were investigated from the rheological and viscoelastic point of view to clearly show promising behavior in connection to 3D printing. Furthermore, the swelling capabilities with water diffusion kinetics were also elucidated.

In-Situ Coating of Iron with a Conducting Polymer, Polypyrrole, as a Promise for Corrosion Protection.

Iron microparticles were coated with polypyrrole in situ during the chemical oxidation of pyrrole with ammonium peroxydisulfate in aqueous medium. A series of hybrid organic/inorganic core-shell materials were prepared with 30-76 wt% iron content. Polypyrrole coating was revealed by scanning electron microscopy, and its molecular structure and completeness were proved by FTIR and Raman spectroscopies.

Investigation of polypyrrole based composite material for lithium sulfur batteries.

With the rising demand for electricity storage devices, the performance requirements for such equipment have become increasingly stringent. Lithium-sulfur (Li-S) batteries are poised to be among the next generation of energy storage systems. However, before they can be commercially viable, several challenges must be addressed, including low sulfur conductivity and the shuttle effect.

The influence of surface properties on the cooperative behavior of powdered milks.

This study comprehensively analyzes various powdered milk samples to elucidate their structural, surface, and mechanical properties. Through detailed examination, diverse characteristics among the samples were observed, shedding light on their behavior under different conditions. Notably, findings reveal intriguing insights into surface energy profiles, Harkins spreading coefficient, powder rheological properties, and sound absorption efficiency of the powdered milk samples.

Formulating Sustainable Emulsions: Mandelic Acid and Essential Oils as Natural Preservatives.

Emulsion products with natural antimicrobials are becoming increasingly popular for topical application. is interesting in cosmetics due to its potent exfoliating properties, which have driven advancements in skincare technologies. Essential oils have various properties, of which the most useful in cosmetics are those that do not cause irritation, smell pleasant, and have other beneficial properties such as antimicrobial effects.