Losartan alters osteoblast differentiation and increases bone mass through inhibition of TGF signalling in vitro and in an OIM mouse model.

Excessive production of Transforming Growth Factor β (TGFβ) is commonly associated with dominant and recessive forms of OI. Previous reports have indicated that administration of TGFβ-targeted antibodies maybe of potential therapeutic benefit to OI patients. However, direct targeting of TGFβ is likely to cause multiple adverse effects including simulation of autoimmunity.

The use of microphysiological systems to model metastatic cancer.

Cancer is one of the leading causes of death in the 21st century, with metastasis of cancer attributing to 90% of cancer-related deaths. Therefore, to improve patient outcomes there is a need for better preclinical models to increase the success of translating oncological therapies into the clinic. Current traditional staticmodels lack a perfusable network which is critical to overcome the diffusional mass transfer limit to provide a mechanism for the exchange of essential nutrients and waste removal, and increase their physiological relevance.

Gelatin-containing porous polycaprolactone PolyHIPEs as substrates for 3D breast cancer cell culture and vascular infiltration.

Tumour survival and growth are reliant on angiogenesis, the formation of new blood vessels, to facilitate nutrient and waste exchange and, importantly, provide a route for metastasis from a primary to a secondary site. Whilst current models can ensure the transport and exchange of nutrients and waste via diffusion over distances greater than 200 μm, many lack sufficient vasculature capable of recapitulating the tumour microenvironment and, thus, metastasis. In this study, we utilise gelatin-containing polymerised high internal phase emulsion (polyHIPE) templated polycaprolactone-methacrylate (PCL-M) scaffolds to fabricate a composite material to support the 3D culture of MDA-MB-231 breast cancer cells and vascular ingrowth.

Surfactant-free gelatin-stabilised biodegradable polymerised high internal phase emulsions with macroporous structures.

High internal phase emulsion (HIPE) templating is a well-established method for the generation of polymeric materials with high porosity (>74%) and degree of interconnectivity. The porosity and pore size can be altered by adjusting parameters during emulsification, which affects the properties of the resulting porous structure. However, there remain challenges for the fabrication of polyHIPEs, including typically small pore sizes (∼20-50 μm) and the use of surfactants, which can limit their use in biological applications.

Development of PCL PolyHIPE Substrates for 3D Breast Cancer Cell Culture.

Cancer is a becoming a huge social and economic burden on society, becoming one of the most significant barriers to life expectancy in the 21st century. In particular, breast cancer is one of the leading causes of death for women. One of the most significant difficulties to finding efficient therapies for specific cancers, such as breast cancer, is the efficiency and ease of drug development and testing.

Semi-interpenetrating Polyurethane Network Foams Containing Highly Branched Poly(-isopropyl acrylamide) with Vancomycin Functionality.

Highly branched poly(-isopropylacrylamide) (HB-PNIPAM), functionalized with vancomycin at the chain ends, acted as a bacterial adhesive and was incorporated into polyurethane foams to form semi-interpenetrating networks. PNIPAM was labeled with a solvatochromic dye, Nile red. It was found that the thermal response of the polymer was dependent on the architecture, and temperature-dependent color changes were observed within the foam.

Tuning Electrospun Substrate Stiffness for the Fabrication of a Biomimetic Amniotic Membrane Substitute for Corneal Healing.

Corneal blindness is the fourth most common cause of vision impairment worldwide with a high incidence in global south countries. A recently developed surgical technique for treating corneal blindness is simple limbal epithelial transplantation (SLET), which uses small pieces of healthy limbal tissue (limbal explants) delivered to the damaged eye using the human amniotic membrane (AM) as a carrier. SLET relies on the use of tissue banks for the AM that reduces the availability of the technique.

Considerations Using Additive Manufacture of Emulsion Inks to Produce Respiratory Protective Filters Against Viral Respiratory Tract Infections Such as the COVID-19 Virus.

This review paper explores the potential of combining emulsion-based inks with additive manufacturing (AM) to produce filters for respiratory protective equipment (RPE) in the fight against viral and bacterial infections of the respiratory tract. The value of these filters has been highlighted by the current severe acute respiratory syndrome coronavirus-2 crisis where the importance of protective equipment for health care workers cannot be overstated. Three-dimensional (3D) printing of emulsions is an emerging technology built on a well-established field of emulsion templating to produce porous materials such as polymerized high internal phase emulsions (polyHIPEs).

Combined Porogen Leaching and Emulsion Templating to produce Bone Tissue Engineering Scaffolds.

Bone has a hierarchy of porosity that is often overlooked when creating tissue engineering scaffolds where pore sizes are typically confined to a single order of magnitude. High internal phase emulsion (HIPE) templating produces polymerized HIPEs (polyHIPEs): highly interconnected porous polymers which have two length scales of porosity covering the 1-100 μm range. However, additional larger scales of porosity cannot be introduced in the standard emulsion formulation.

Bioengineered airway epithelial grafts with mucociliary function based on collagen IV- and laminin-containing extracellular matrix scaffolds.

Current methods to replace damaged upper airway epithelium with exogenous cells are limited. Existing strategies use grafts that lack mucociliary function, leading to infection and the retention of secretions and keratin debris. Strategies that regenerate airway epithelium with mucociliary function are clearly desirable and would enable new treatments for complex airway disease.

Ag modified mesoporous bioactive glass nanoparticles for enhanced antibacterial activity in 3D infected skin model.

Bioactive glasses (BG) are versatile materials for various biomedical applications, including bone regeneration and wound healing, due to their bone bonding, antibacterial, osteogenic, and angiogenic properties. In this study, we aimed to enhance the antibacterial activity of SiO-CaO mesoporous bioactive glass nanoparticles (MBGN) by incorporating silver (Ag) through a surface modification approach. The modified Ag-containing nanoparticles (Ag-MBGN) maintained spherical shape, mesoporous structure, high dispersity, and apatite-forming ability after the surface functionalization.

Designing new synthetic materials for use in the pelvic floor: what is the problem with the existing polypropylene materials?

Purpose Of Review: This review identifies the clinical complications associated with the design of the current polyproplylene mesh materials used for the treatment of stress urinary incontinence and pelvic organ prolapse. Following on from this, new alternative materials under development for pelvic floor repair are reviewed.

Recent Findings: It is well accepted that the textile properties of the current polypropylene surgical meshes are not suitable for the pelvic floor environment.

Tissue engineering for the pelvic floor.

Purpose Of Review: To set in context the challenge of developing tissue-engineered constructs for use in the female pelvic floor compared with at least 30 years of research progress in tissue engineering for other tissues.

Recent Findings: The relative lack of information on the mechanical requirements of the pelvic floor in women who have suffered damage to these tissues is a major challenge to designing tissue-engineered materials for use in this area. A few groups are now using autologous cells and biomaterials to develop constructs for repair and regeneration of the pelvic floor.

Improving the biocompatibility of biomaterial constructs and constructs delivering cells for the pelvic floor.

Purpose Of Review: Interactions between biomaterials and biomaterial-delivering cells and the host tissues are complexly affected by the material itself, the ultrastructure of the overall construct and cells and other bioactive factors involved. The aim of this review is to review the current understanding on the definitions of biocompatibility and current advances in improving biocompatability of tissue-engineered constructs.

Recent Findings: Some synthetic materials are associated with more foreign body reactions compared with natural materials; however, they allow fabrication of materials with a great diversity of physical and mechanical properties.

The changing regulatory landscape for biomedical implants and its relationship to withdrawal of some vaginal mesh products.

Purpose Of Review: Advancements in biomedical engineering and advanced therapies including tissue engineering products necessitate revisions to the regulation and governance of their production and use to ensure patient safety. In this review, the current regulations and recent improvements on the governance of biomedical devices are reviewed.

Recent Findings: Current regulations on approval of biomedical devices failed to address some important aspects related to the definition of biocompatibility of medical implants.

The use of implanted materials for treating women with pelvic organ prolapse and stress urinary incontinence.

Purpose Of Review: To review the current clinical management of stress urinary incontinence and pelvic organ prolapse following the adverse complications seen in the use of polypropylene mesh to treat both.

Recent Findings: Materials developed for use in abdominal hernia repair have not proven risk-free when used to support pelvic organs particularly when inserted via the vagina. Following unacceptably high levels of severe complications when high-density polypropylene mesh is inserted via the vagina to treat pelvic organ prolapse, reported over the last decade, there is now an agreed consensus between surgeons about surgical approaches and materials, which should be recommended for use in stress urinary incontinence and pelvic organ prolapse.

Sterilization effects on the handling and degradation properties of calcium phosphate cements containing poly ( -lactic-co-glycolic acid) porogens and carboxymethyl cellulose.

Injectable, self-setting calcium phosphate cements (CPCs) are synthetic bone substitutes considered favorable for the repair and regeneration of bone due to their osteocompatibility and unique handling properties. However, their clinical applicability can be compromised due to insufficient cohesion upon injection into the body coupled with poor degradation rates that restricts new bone formation. Consequently, carboxymethyl cellulose (CMC) was incorporated into CPC formulations to improve their cohesion and injectability while poly ( -lactic-co-glycolic acid) (PLGA) porogens were added to introduce macroporosity and improve their biodegradation rate.

Topography design in model membranes: Where biology meets physics.

Artificial membranes with complex topography aid the understanding of biological processes where membrane geometry plays a key regulatory role. In this review, we highlight how emerging material and engineering technologies have been employed to create minimal models of cell signaling pathways, in vitro. These artificial systems allow life scientists to answer ever more challenging questions with regards to mechanisms in cellular biology.

Development of K-doped ZnO nanoparticles encapsulated crosslinked chitosan based new membranes to stimulate angiogenesis in tissue engineered skin grafts.

Nanoparticles are well recognized for their biological applications including tissue-regeneration due to large surface area and chemical properties. In this study, K-doped zinc oxide (ZnO) nanoparticles containing porous hydrogels were synthesized via freeze gelation. The morphology and pore dimensions were studied by scanning electron microscopy (SEM).

Hydroxypropylmethyl cellulose (HPMC) crosslinked chitosan (CH) based scaffolds containing bioactive glass (BG) and zinc oxide (ZnO) for alveolar bone repair.

The success of a dental implant relies on the presence of an optimal alveolar ridge. The aim of this study was to fabricate HPMC crosslinked chitosan based scaffolds for alveolar bone repair. Our results indicated that HPMC crosslinked CH/BG foams presented better morphological structure (132-90.

Composite porous scaffold of PEG/PLA support improved bone matrix deposition in vitro compared to PLA-only scaffolds.

Controllable pore size and architecture are essential properties for tissue-engineering scaffolds to support cell ingrowth colonization. To investigate the effect of polyethylene glycol (PEG) addition on porosity and bone-cell behavior, porous polylactic acid (PLA)-PEG scaffolds were developed with varied weight ratios of PLA-PEG (100/0, 90/10, 75/25) using solvent casting and porogen leaching. Sugar 200-300 µm in size was used as a porogen.

Identification of anti-cancer potential of doxazocin: Loading into chitosan based biodegradable hydrogels for on-site delivery to treat cervical cancer.

In this study, an effective, biocompatible and biodegradable co-polymer comprising of chitosan (CS) and polyvinyl alcohol (PVA) hydrogels, chemically crosslinked and impregnated with doxazocin, is reported. The chemical structural properties of the hydrogels were evaluated by Fourier Transform Infrared spectroscopy (FTIR) and physical properties were analysed by scanning electron microscopy (SEM). The swelling behaviour is an important parameter for drug release mechanism and was investigated to find out the solution absorption capacity of the synthesized hydrogels.

Chitosan/hydroxyapatite (HA)/hydroxypropylmethyl cellulose (HPMC) spongy scaffolds-synthesis and evaluation as potential alveolar bone substitutes.

Alveolar bone loss is associated with infections and its augmentation is a pre-requisite for the success of dental implants. In present study, we aim to develop and evaluate novel freeze dried doxycycline loaded chitosan (CS)/hydroxyapatite (HA) spongy scaffolds where hydroxypropylmethyl cellulose (HPMC) was added as a crosslinker. Scaffolds displayed compressive strength of 14MPa/cm and 0.