Hemp Extract () in the Treatment of Gastrointestinal Distress and Dyspepsia: Historical Insights from Barcelona, Spain.

This study explores the trajectory of interest in and use of (hemp extract, i.e., extract of L.

Ocular and Plasma Pharmacokinetics of Sitagliptin Eye Drops: Preclinical Data.

Early stages of diabetic retinopathy are currently considered an unmet medical need due to the lack of effective treatments beyond proper monitoring and control of glycemia and blood pressure. Sitagliptin eye drops have emerged as a new therapeutic approach against early stages of the disease, as they can prevent its main hallmarks, including both neurodegeneration and microvascular impairment. Interestingly, all of these effects occur without any glycemic systemic improvement.

Effect of Lactic Acid Bacteria-Derived Postbiotic Supplementation on Tuberculosis in Wild Boar Populations.

The Eurasian wild boar () is a key wildlife host for tuberculosis (TB) in central and southwestern Spain, posing a challenge to TB eradication in livestock. New strategies, including the use of beneficial microbes, are being explored to mitigate wildlife diseases. This study evaluated the effect of oral supplementation with postbiotic antimycobacterial metabolites produced using Ingulados' lactic acid bacteria (LAB) collection on TB development in wild boar.

Critical Design and Operating Parameters of Active Waveguide Bragg Gratings for Laser Performance.

Active waveguide Bragg gratings (AWBGs) are promising photonic structures that combine the very efficient reflective properties of a Bragg grating with the power amplification character of rare earths. This combination may lead to a potential monolithic laser under the proper conditions. However, the photonic response of these structures highly depends on the grating design and operating parameters, so modeling its response for their laser performance is a must.

Stilbenes in Red Wine: Formation and Biological Potential of Resveratrol and Piceid Dimers.

Resveratrol and its glucoside, piceid, are the primary stilbenes present in wine. These compounds are well known for their pharmaceutical properties. However, these compounds can undergo chemical transformations in wines, such as polymerization in the presence of metallic reagents.

The Use of a Penta-Deuterophenyl Substituent to Improve the Metabolic Stability of a Tyrosine Kinase Inhibitor.

In cases in which a rapid metabolism is the cause of an unfavorable pharmacokinetic profile, it is important to determine the Sites of Metabolism (SoMs) of a molecule to introduce the necessary modifications to improve the stability of the compound. The substitution of hydrogen atoms by deuterium atoms has been proposed to ameliorate such properties due to the greater stability of the C-D bonds. , bearing a 2-phenylamino substituent, is a compound previously described by our group with good biological activity as a discoidin domain receptor (DDR2) inhibitor but suffers from low metabolic stability determined in a test with rat-liver microsomes (less than 50% of the initial compound after 60 min).

Nanoconfined Chlorine-Substituted Monomethine Cyanine Dye with a Propionamide Function Based on the Thiazole Orange Scaffold-Use of a Fluorogenic Probe for Cell Staining and Nucleic Acid Visualization.

The development of fluorescence-based methods for bioassays and medical diagnostics requires the design and synthesis of specific markers to target biological microobjects. However, biomolecular recognition in real cellular systems is not always as selective as desired. A new concept for creating fluorescent biomolecular probes, utilizing a fluorogenic dye and biodegradable, biocompatible nanomaterials, is demonstrated.

A Comparative Digestion Study of Three Lipid Delivery Systems for Arachidonic and Docosahexaenoic Acids Intended to Be Used for Preterm Infants.

It is well stablished that docosahexaenoic (DHA) and arachidonic (ARA) acids fulfill relevant biological activities, especially in newborns. However, oils containing these fatty acids are not always optimally digestible. To address this, various formulation strategies and lipid delivery systems have been developed.

Phosphine Oxide Indenoquinoline Derivatives: Synthesis and Biological Evaluation as Topoisomerase I Inhibitors and Antiproliferative Agents.

The synthesis of phosphorous indenoquinolines and their biological evaluation as topoisomerase 1 (TOP1) inhibitors and antiproliferative agents were performed. First, the preparation of new hybrid 5-indeno[2,1-]quinolines with a phosphine oxide group was performed by a two-step Povarov-type [4+2]-cycloaddition reaction between the corresponding phosphorated aldimines with indene in the presence of BF·EtO. Subsequent oxidation of the methylene present in the structure resulted in the corresponding indeno[2,1-]quinolin-7-one phosphine oxides .

The Photocatalytic Degradation of Enrofloxacin Using an Ecofriendly Natural Iron Mineral: The Relationship Between the Degradation Routes, Generated Byproducts, and Antimicrobial Activity of Treated Solutions.

The use of ecofriendly natural minerals in photocatalytic processes to deal with the antimicrobial activity (AA) associated with antibiotics in aqueous systems is still incipient. Therefore, in this work, the capacity of a natural iron material (NIM) in photo-treatments, generating reactive species, to remove the antibiotic enrofloxacin and decrease its associated AA from water is presented. Initially, the fundamental composition, oxidation states, bandgap, point of zero charge, and morphological characteristics of the NIM were determined, denoting the NIM's feasibility for photocatalytic processes.

Phytochemical Study and In Vitro Antioxidant Activity of Along with Antitumor Activity of the Isolated -Tiliroside and Luteolin 4'--β-Xyloside.

Twelve compounds (-), kaempferol (), luteolin (), luteolin 4'--xyloside (), luteolin 4'--β-glucoside (), quercetin 4'--β-xyloside (), kaempferol-3--[6″--(E)-p-coumaroyl]-β-D-glucoside (-tiliroside) (), protocatechuic acid (), gallic acid (), methyl gallate (), ethyl gallate (), shikimic acid-3--gallate (), and 3,3',4'-tri--methyl-ellagic acid 4-sulfate (), were isolated and identified from the aerial parts of (Cav.) Pers (synonym: C. Presl.

From Psychoactivity to Antimicrobial Agents: Multifaceted Applications of Synthetic Cathinones and Extracts.

The emergence of new psychoactive substances (NPS) in the global drug market since the 2000s has posed major challenges for regulators and law enforcement agencies. Among these, synthetic cathinones have gained prominence due to their stimulant effects on the central nervous system, leading to widespread recreational use. These compounds, often marketed as alternatives to illicit stimulants such as amphetamines and cocaine, have been linked to numerous cases of intoxication, addiction and death.

Oligostyrylbenzene Derivatives with Antiparasitic and Antibacterial Activity as Potent G-Quadruplex Ligands.

G-quadruplexes (G4s) are non-canonical secondary structures that play a crucial role in the regulation of genetic expression. This study explores the interaction between G4s and a small family of oligostyrylbenzene (OSB) derivatives, characterized by tris(styryl)benzene and tetrastyrylbenzene backbones, functionalized with either trimethylammonium or 1-methylpyridinium groups. Initially identified as DNA ligands, these OSB derivatives have now been recognized as potent G4 binders, surpassing in binding affinity commercially available ligands such as pyridostatin and displaying good selectivity for G4s over duplex DNA.

Release and Disintegration Properties of Poly(lactic Acid) Films with Allyl Isothiocyanate-β-Cyclodextrin Inclusion Complexes for Active Food Packaging.

This study aimed to enhance the properties and compostability of active poly(lactic acid) (PLA) films by incorporating β-cyclodextrin (β-CD) inclusion complexes with allyl isothiocyanate (AITC). Films were prepared using melt extrusion and characterized based on their structural, chemical, morphological, thermal, and barrier properties. These inclusion complexes improved the thermal stability and moisture absorption of films, enhancing disintegration under composting conditions.

Non-Invasive Characterisation of Bromoil Prints by External Reflection FTIR Spectroscopy.

The bromoil process, developed in 1907, was a photographic technique highly esteemed by pictorialist photographers for its capacity for image manipulation, which aligns its expressiveness with traditional pictorial techniques. Despite the artistic and technical value of bromoils and their prevalence in renowned collections, there is little research on their composition and structural characteristics. This study uses non-invasive external reflection FTIR spectroscopy to characterise 16 bromoil prints dating from the 1920s to 2010.

Development of Volatile Compounds in Raw Fermented Sausages with Reduced Nitrogen Compounds-The Effect of Tomato Pomace Addition.

The aim of this study was to assess the impact of tomato pomace (TP) on the content of volatile compounds and L-carnitine and the sensory characteristics of raw fermented sausages produced with reduced nitrite. The produced sausages were divided into three experimental groups: control sample, sample with 1.5% addition of freeze-dried tomato pomace, and sample with 2.

Mechanical Properties of Concrete Mixes with Selectively Crushed Wind Turbine Blade: Comparison with Raw-Crushing.

The glass fiber-reinforced polymer (GFRP) materials of wind turbine blades can be recovered and recycled by crushing, thereby solving one of the most perplexing problems facing the wind energy sector. This process yields selectively crushed wind turbine blade (SCWTB), a novel waste that is almost exclusively composed of GFRP composite fibers that can be revalued in terms of their use as a raw material in concrete production. In this research, the fresh and mechanical performance of concrete made with 1.

Fabrication and Coating of Porous Ti6Al4V Structures for Application in PEM Fuel Cell and Electrolyzer Technologies.

The production of green hydrogen through proton exchange membrane water electrolysis (PEMWE) is a promising technology for industry decarbonization, outperforming alkaline water electrolysis (AWE). However, PEMWE requires significant investment, which can be mitigated through material and design advancements. Components like bipolar porous plates (BPPs) and porous transport films (PTFs) contribute substantially to costs and performance.

Predicting the Effect of RSW Parameters on the Shear Force and Nugget Diameter of Similar and Dissimilar Joints Using Machine Learning Algorithms and Multilayer Perceptron.

Resistance spot-welded joints are crucial parts in contemporary manufacturing technology due to their ubiquitous use in the automobile industry. The necessity of improving manufacturing efficiency and quality at an affordable cost requires deep knowledge of the resistance spot welding (RSW) process and the development of artificial neural network (ANN)- and machine learning (ML)-based modelling techniques, apt for providing essential tools for design, planning, and incorporation in the welding process. Tensile shear force and nugget diameter are the most crucial outputs for evaluating the quality of a resistance spot-welded specimen.

Comparison of Sulfamethoxazole Removal Efficiency Using Polyethersulfone Ultrafiltration Membrane Modified by Various Methods.

Nowadays, there is a growing interest in membrane modification processes to improve their characteristics and the effectiveness of their treatments and reduce the possible fouling. In this sense, in this work, a modification of an ultrafiltration membrane with three different materials has been carried out: reduced graphene oxide (rGO), chitosan and MgCl. For both the native and the modified membranes, a study has been carried out to remove the emerging contaminant sulfamethoxazole (SMX).

A Review of Additive Manufacturing of Biodegradable Fe and Zn Alloys for Medical Implants Using Laser Powder Bed Fusion (LPBF).

This review explores the advancements in additive manufacturing (AM) of biodegradable iron (Fe) and zinc (Zn) alloys, focusing on their potential for medical implants, particularly in vascular and bone applications. Fe alloys are noted for their superior mechanical properties and biocompatibility but exhibit a slow corrosion rate, limiting their biodegradability. Strategies such as alloying with manganese (Mn) and optimizing microstructure via laser powder bed fusion (LPBF) have been employed to increase Fe's corrosion rate and mechanical performance.

Powder Metallurgy Processing to Enhance Superelasticity and Shape Memory in Polycrystalline Cu-Al-Ni Alloys: Reference Material for Additive Manufacturing.

Shape memory alloys (SMAs) are functional materials with a wide range of applications, from the aerospace sector to the biomedical field. Nowadays, there is a worldwide interest in developing SMAs through powder metallurgy like additive manufacturing (AM), which allows innovative building processes. However, producing SMAs using AM techniques is particularly challenging because of the microstructure required to obtain optimal functional properties.

Microstructure and Bioactivity of Ca- and Mg-Modified Silicon Oxycarbide-Based Amorphous Ceramics.

Silicon oxycarbide (SiOC), Ca- and Mg-modified silicon oxycarbide (SiCaOC and SiMgOC) were synthesized via sol-gel processing with subsequent pyrolysis in an inert gas atmosphere. The physicochemical structures of the materials were characterized by XRD, SEM, FTIR, and Si MAS NMR. Biocompatibility and in vitro bioactivity were detected by MTT, cell adhesion assay, and simulated body fluid (SBF) immersion test.

Mechanical Behaviour and Microstructural Analysis of Earthen Materials Reinforced with Intensive Agricultural By-Products and Binders.

Modern construction is largely dependent on steel and concrete, with natural materials such as earth being significantly underutilised. Despite its sustainability and accessibility, earth is not being used to its full potential in developed countries. This study explores innovative building materials using Alhambra Formation soil (Granada, Spain) reinforced with difficult-to-recycle agricultural waste: polypropylene fibres contaminated with organic matter and leachates.

Evaluation of Almond Shell Activated Carbon for Dye (Methylene Blue and Malachite Green) Removal by Experimental and Simulation Studies.

The present work analyzes the behavior of an activated carbon fabricated from almond shells for the removal of cationic dyes (methylene blue, MB, and malachite green, MG) by adsorption from aqueous solutions. The carbonized precursor was activated with KOH at a 1:2 (/) ratio with the objective of increasing both the surface area and the pore volume. Both non-activated and activated carbon were characterized in different aspects of interest in dye adsorption studies (surface structure, point of zero charge, specific surface area, and pore size distribution).