A Novel Crosslinking Approach for Biomanufacturing of a Collagen-Based Skin Dermal Template.

Third-degree burns result in extensive damage to the skin's epidermal and dermal layers, with limited treatment options available. Currently, xenogeneic collagen-based skin grafts are used as scaffolds to integrate into the wound bed and provide a template for neodermis formation. Existing commercial products like Integra dermal templates rely on a time-consuming and variable dehydrothermal (DHT) crosslinking process.

Constructing High-Performance Yarn-Shaped Electrodes via Twisting-after-Coating Technique for Weavable Seawater Battery.

Seawater batteries (SWBs) are green aqueous power sources with great potential in marine applications. So far, SWBs are mainly built on rigid substrates, which hinders their adaptability to marine textile applications. Herein, we constructed a rechargeable yarn-shaped SWB consisting of nickel hexacyanoferrate (Ni-HCF)-modified carbon yarn (positive electrode), glass fiber diaphragm, and polyimide (PI)-modified carbon yarn (negative electrode).

3D Printed Carbon Nanotube/Phenolic Composites for Thermal Dissipation and Electromagnetic Interference Shielding.

Here we demonstrate direct ink write (DIW) additive manufacturing of carbon nanotube (CNT)/phenolic composites with heat dissipation and excellent electromagnetic interference (EMI) shielding capabilities without curing-induced deformation. Such polymer composites are valuable for protecting electronic devices from overheating and electromagnetic interference. CNTs were used as a multifunctional nanofiller to improve electrical and thermal conductivity, printability, stability during curing, and EMI shielding performance of CNT/phenolic composites.

A facile microfluidic chip design for DNA detection using dengue serotypes as a proof-of-concept case study.

Dengue fever is caused by any of the four serotypes of dengue viruses, DENV-1, DENV-2, DENV-3 and DENV-4 spread by mosquito bites and is important to distinguish between them due to lack of cross-protective neutralizing antibodies for each serotype. Secondary infections also put individuals at higher risk for severe dengue illness than those who have not been previously infected. Current preferred assays include reverse transcription-PCR (RT-PCR) and ELISA.

Achieving biomimetic porosity and strength of bone in magnesium scaffolds through binder jet additive manufacturing.

Magnesium (Mg) alloys are a promising candidate for synthetic bone tissue substitutes. In bone tissue engineering, achieving a balance between pore characteristics that facilitate biological functions and the essential stiffness required for load-bearing functions is extremely challenging. This study employs binder jet additive manufacturing to fabricate an interconnected porous structure in Mg alloys that mimics the microporosity and mechanical properties of human cortical bone types.

A Modeling Framework for the Thermoforming of Carbon Fiber Reinforced Thermoplastic Composites.

A comprehensive modeling framework for the thermoforming of polymer matrix woven laminate composite was developed. Two numerical indicators, the slip path length and traction magnitude, have been identified to be positively correlated to matrix smearing and wrinkling defects. The material model has been calibrated with picture-frame experimental results, and the prediction accuracy for intra-ply shear and thickness distribution was examined with measurements of the physically formed parts.

Enhanced Plastic Stability: Achieving High Performance in a Al6xxx Alloy Fabricated by Additive Manufacturing.

Additive manufacturing (AM) facilitates the creation of materials with unique microstructural features and distinctive phenomena as compared to conventional manufacturing methods. Among the various well-fabricated AM alloys, aluminum alloys garner substantial attention due to their extensive applications in the automotive and aerospace industries. In this work, an Al6xxx alloy is successfully fabricated with outstanding performance.

Progress and Opportunities for Machine Learning in Materials and Processes of Additive Manufacturing.

In recent years, there has been widespread adoption of machine learning (ML) technologies to unravel intricate relationships among diverse parameters in various additive manufacturing (AM) techniques. These ML models excel at recognizing complex patterns from extensive, well-curated datasets, thereby unveiling latent knowledge crucial for informed decision-making during the AM process. The collaborative synergy between ML and AM holds the potential to revolutionize the design and production of AM-printed parts.

High-Throughput Microfluidic Extraction of Platelet-free Plasma for MicroRNA and Extracellular Vesicle Analysis.

Cell-free RNAs and extracellular vesicles (EVs) are valuable biomarkers in liquid biopsies, but they are prone to preanalytical variabilities such as nonstandardized centrifugation or blood degradation. Herein, we report a high-throughput and label-free inertial microfluidic device (ExoArc) for isolation of platelet-free plasma from blood for RNA and EV analysis. Unlike conventional inertial microfluidic devices widely used for cell sorting, a submicrometer size cutoff (500 nm) was achieved which completely removed all leukocytes, RBCs, platelets, and cellular debris based on differential lateral migration induced by Dean vortices.

A multiplex Taqman PCR assay for MRSA detection from whole blood.

Methicillin-resistant Staphylococcus aureus (MRSA) causes a wide range of hospital and community-acquired infections worldwide. MRSA is associated with worse clinical outcomes that can lead to multiple organ failure, septic shock, and death, making timely diagnosis of MRSA infections very crucial. In the present work, we develop a method that enables the positive enrichment of bacteria from spiked whole blood using protein coated magnetic beads, followed by their lysis, and detection by a real-time multiplex PCR directly.

Commercialization of skin substitutes for third-degree burn wounds.

Technological advances have increasingly provided more and better treatment options for patients with severe burns. Here, we provide a bird's-eye view of the product development process for third-degree burn wounds with considerations of the critical interaction with regulatory bodies, existing technological gaps, and future directions for skin substitutes.

Additive manufacturing of alloys with programmable microstructure and properties.

In metallurgy, mechanical deformation is essential to engineer the microstructure of metals and to tailor their mechanical properties. However, this practice is inapplicable to near-net-shape metal parts produced by additive manufacturing (AM), since it would irremediably compromise their carefully designed geometries. In this work, we show how to circumvent this limitation by controlling the dislocation density and thermal stability of a steel alloy produced by laser powder bed fusion (LPBF) technology.

Advances in Folic Acid Biosensors and Their Significance in Maternal, Perinatal, and Paediatric Preventive Medicine.

Auxotrophic primates like human beings rely on exogenous dietary vitamin B supplementation to meet their metabolic demands. Folates play a crucial role in nucleotide synthesis and DNA methylation. Maternal folate deficiency causes several pregnancy-related complications, perinatal defects, and early childhood cognitive impairments.

Energy-Efficient Unmanned Aerial Vehicle-Aided Visible Light Communication with an Angle Diversity Transmitter for Joint Emergency Illumination and Communication.

Unmanned aerial vehicle-aided visible light communication (UAV-VLC) can be used to realize joint emergency illumination and communication, but the endurance of UAV is a key limiting factor. In order to overcome this limitation, this paper proposes the use of an angle diversity transmitter (ADT) to enhance the energy efficiency of the UAV-VLC system. The ADT is designed with one bottom LED and several evenly distributed inclined side LEDs.

Microphysiological Modeling of Gingival Tissues and Host-Material Interactions Using Gingiva-on-Chip.

Gingiva plays a crucial barrier role at the interface of teeth, tooth-supporting structures, microbiome, and external agents. To mimic this complex microenvironment, an in vitro microphysiological platform and biofabricated full-thickness gingival equivalents (gingiva-on-chip) within a vertically stacked microfluidic device is developed. This design allowed long-term and air-liquid interface culture, and host-material interactions under flow conditions.

Pareto optimization with small data by learning across common objective spaces.

In multi-objective optimization, it becomes prohibitively difficult to cover the Pareto front (PF) as the number of points scales exponentially with the dimensionality of the objective space. The challenge is exacerbated in expensive optimization domains where evaluation data is at a premium. To overcome insufficient representations of PFs, Pareto estimation (PE) invokes inverse machine learning to map preferred but unexplored regions along the front to the Pareto set in decision space.

Bioinspired Conductive Enhanced Polyurethane Ionic Skin as Reliable Multifunctional Sensors.

Ionogels prepared from ionic liquid (IL) have the characteristics of nonevaporation and stable performance relative to traditional hydrogels. However, the conductivities of commonly used ionogels are at very low relative to traditional hydrogels because the large sizes of the cation and anion in an IL impedes ion migration in polymer networks. In this study, ultradurable ionogels with suitable mechanical properties and high conductivities are prepared by impregnating IL into a safe, environmentally friendly water-based polyurethane (WPU) network by mimicking the ion transport channels in the phospholipid bilayer of the cell membrane.

Learning-based robotic grasping: A review.

As personalization technology increasingly orchestrates individualized shopping or marketing experiences in industries such as logistics, fast-moving consumer goods, and food delivery, these sectors require flexible solutions that can automate object grasping for unknown or unseen objects without much modification or downtime. Most solutions in the market are based on traditional object recognition and are, therefore, not suitable for grasping unknown objects with varying shapes and textures. Adequate learning policies enable robotic grasping to accommodate high-mix and low-volume manufacturing scenarios.

Vanadium Oxide: Phase Diagrams, Structures, Synthesis, and Applications.

Vanadium oxides with multioxidation states and various crystalline structures offer unique electrical, optical, optoelectronic and magnetic properties, which could be manipulated for various applications. For the past 30 years, significant efforts have been made to study the fundamental science and explore the potential for vanadium oxide materials in ion batteries, water splitting, smart windows, supercapacitors, sensors, and so on. This review focuses on the most recent progress in synthesis methods and applications of some thermodynamically stable and metastable vanadium oxides, including but not limited to VO, VO, VO, VO, VO, VO, VO, and VO.

Interaction Energy Dependency on Pulse Width in ns NIR Laser Scanning of Silicon.

Laser ablation of semiconductor silicon has been extensively studied in the past few decades. In the ultrashort pulse domain, whether in the fs scale or ps scale, the pulse energy fluence threshold in the ablation of silicon is strongly dependent on the pulse width. However, in the ns pulse scale, the energy fluence threshold dependence on the pulse width is not well understood.

Irradiation of UVC LED at 277 nm inactivates coronaviruses in association to photodegradation of spike protein.

To interrupt SARS-CoV-2 transmission chains, Ultraviolet-C (UVC) irradiation has emerged as a potential disinfection tool to aid in blocking the spread of coronaviruses. While conventional 254-nm UVC mercury lamps have been used for disinfection purposes, other UVC wavelengths have emerged as attractive alternatives but a direct comparison of these tools is lacking with the inherent mechanistic properties unclear. Our results using human coronaviruses, hCoV-229E and hCoV-OC43, have indicated that 277-nm UVC LED is most effective in viral inactivation, followed by 222-nm far UVC and 254-nm UVC mercury lamp.

Toward understanding in vivo corrosion: Influence of interfacial hydrogen gas build-up on degradation of magnesium alloy implants.

Limited material transport, causing gas cavities formation, is commonly observed during the degradation of magnesium implants, yet its effects on corrosion are not understood. Herein, a bespoke cell was designed, allowing for the incorporation of an additional agarose layer above the corroding magnesium sample. This design replicates the limited material transport in vitro and enables us to understand its influence on corrosion of magnesium alloys.

222-Nanometer Far-UVC Exposure Results in DNA Damage and Transcriptional Changes to Mammalian Cells.

Ultraviolet (UV) germicidal tools have recently gained attention as a disinfection strategy against the COVID-19 pandemic, but the safety profile arising from their exposure has been controversial and impeded larger-scale implementation. We compare the emerging 222-nanometer far UVC and 277-nanometer UVC LED disinfection modules with the traditional UVC mercury lamp emitting at 254 nm to understand their effects on human retinal cell line ARPE-19 and HEK-A keratinocytes. Cells illuminated with 222-nanometer far UVC survived, while those treated with 254-nanometer and 277-nanometer wavelengths underwent apoptosis via the JNK/ATF2 pathway.