Enhanced electrical conductivity and antibacterial properties of bacterial cellulose composite membrane decorated with hydroxypropyl-β-cyclodextrin/magnetic particle/alpha-lipoic acid/nano silver.

The electrical conductivity and antibacterial properties are crucial characteristics for bacterial cellulose (BC) based membranes to be broadly applied in the field of wearable electronics. In the study, to achieve these aims, alpha-lipoic acid (LA) was utilized as anchoring groups and reducing agent, hydroxypropyl-β-cyclodextrin (HP-β-CD) capped magnetic particles (FeO NPs) and the in-situ formed silver nanoparticles (AgNPs) were sequentially incorporated into the BC matrix to fabricate BC based nanocomposite membranes (HP-β-CD/FeO/LA@BC and HP-β-CD/FeO/LA/Ag@BC). Fourier transform attenuated total reflectance infrared spectroscopy (FTIR-ATR) and field emission scanning electron microscopy (FE-SEM) analysis proved the dense networks were formed in the modified BC membranes.

High-yield upcycling of feather wastes into solid-state ultra-long phosphorescence carbon dots for advanced anticounterfeiting and information encryption.

Recently, biomass-derived carbon dots (CDs) have attracted considerable attention in high-technology fields due to their prominent merits, including brilliant luminescence, superior biocompatibility, and low toxicity. However, most of the biomass-derived CDs only show bright fluorescence in diluted solution because of aggregation-induced quenching effect, hence cannot exhibit solid-state long-lived room-temperature phosphorescence (RTP) in ambient conditions. Herein, matrix-free solid-state RTP with an average lifetime of 0.

A short-time, low-dosage chemicals dyeing of polyester/cotton blended fabric with benzothiazole dyes in water-less, salt-free dyeing system.

Non-aqueous media dyeing technology has highly innovative as it reduces pollution without increasing cost in polyester/cotton blended fabric dyeing. However, disperse dyes can stain in cotton component of the polyester/cotton blended fabric during dyeing process, resulting poor quality of dyed products. In this study, a groundbreaking comprehensive investigation was conducted on the dyeing behavior of C.

Human fall simulation testing method: where we are.

Falls pose a significant threat to human health and safety. Accurately assessing the protective effectiveness of fall protection products can significantly reduce the occurrence of fall accidents. This paper systematically reviews the types and risk factors of human falls and then discusses the current research status and future prospects of various test methods for human fall protection.

Incorporation of polyvinyl alcohol in bacterial cellulose/polypyrrole flexible conductive films to enhance the mechanical and conductive performance.

The integration of polypyrrole (PPy) into bacterial cellulose (BC) has provided significant conductivity and cost benefits. However, this combination has led to a reduction in mechanical properties, particularly in terms of elongation at break and tensile strength. This study investigated the enhancement of BC/PPy composite films by incorporating polyvinyl alcohol (PVA).

Electrode/Electrolyte Optimization-Induced Double-Layered Architecture for High-Performance Aqueous Zinc-(Dual) Halogen Batteries.

Aqueous zinc-halogen batteries are promising candidates for large-scale energy storage due to their abundant resources, intrinsic safety, and high theoretical capacity. Nevertheless, the uncontrollable zinc dendrite growth and spontaneous shuttle effect of active species have prohibited their practical implementation. Herein, a double-layered protective film based on zinc-ethylenediamine tetramethylene phosphonic acid (ZEA) artificial film and ZnF-rich solid electrolyte interphase (SEI) layer has been successfully fabricated on the zinc metal anode via electrode/electrolyte synergistic optimization.

Multifunctional Janus nanofibrous membrane with unidirectional water transport and pH-responsive color-changing for wound dressing.

Chronic wounds often produce a significant volume of exudate, posing a substantial obstacle to healing. Consequently, there is a pressing demand for a versatile dressing capable of effectively managing exudate in chronic wounds. In this context, a Janus smart dressing is proposed, featuring unidirectional water transport and a pH-responsive color-changing for exudate management and wound monitoring.

Utilization of Tea Polyphenols as Color Developers in Reversible Thermochromic Dyes for Thermosensitive Color Change and Enhanced Functionality of Polyester Fabrics.

Thermochromic textiles possess the capability to indicate ambient temperature through color changes, enabling real-time temperature monitoring and providing temperature warnings for body heat management. In this study, three thermochromic dyes-blue, red, and yellow-were synthesized using crystalline violet lactone (CVL), 6'-(diethylamino)-1',3'-dimethyl-fluoran (DDF), and 3',6'-dimethoxyfluoran (DOF) as leuco dyes, respectively, with biomass tea polyphenol serving as the color developer and tetradecanol as the phase change material. The chemical structures of these dyes were characterized using UV spectroscopy, infrared spectroscopy, Raman spectroscopy and H NMR.

Boron-doped carbon dots with time-resolved room temperature phosphorescence for detection of ciprofloxacin hydrochloride and information encryption applications.

Novel boron-doped carbon dots (BCDs) with extended afterglow characteristics were synthesized via a one-step solvothermal method using acrylamide, sulfosalicylic acid, and sodium tetraborate as protective matrices. The presence of boron from sodium tetraborate introduced an empty orbital, allowing it to form a more extended conjugated system with adjacent oxygen atoms, thereby lowering the energy level of the lowest unoccupied molecular orbital in the system. The phosphorescence emission of these BCDs exhibits a red shift over time from 450 to 500 nm.

Versatile Keratin Fibrous Adsorbents with Rapid-Response Shape-Memory Features for Sustainable Water Remediation.

Biodegradable shape-memory polymers derived from protein substrates are attractive alternatives with strong potential for valorization, although their reconstruction remains a challenge due to the poor processability and inherent instability. Herein, based on Maillard reaction and immobilization, a feather keratin fibrous adsorbent featuring dual-response shape-memory is fabricated by co-spinning with pullulan, heating, and air-assisted spraying ZIF-8-NH. Maillard reaction between the amino group of keratin and the carbonyl group of pullulan improves the mechanics and thermal performance of the adsorbent.

A Review of Carbon Nanofiber Materials for Dendrite-Free Lithium-Metal Anodes.

Lithium metal is regarded as ideal anode material due to its high theoretical specific capacity and low electrode potential. However, the uncontrollable growth of lithium dendrites seriously hinders the practical application of lithium-metal batteries (LMBs). Among various strategies, carbon nanofiber materials have shown great potential in stabilizing the lithium-metal anode (LMA) due to their unique functional and structural characteristics.

Novel Approach for the Preparation of a Highly Hydrophobic Coating Material Exhibiting Self-Healing Properties.

A concept to prepare a highly hydrophobic composite with self-healing properties has been designed and verified. The new material is based on a composite of a crystalline hydrophobic fluoro wax, synthesized from montan waxes and perfluoroethylene alcohols, combined with spherical silica nanoparticles equipped with a hydrophobic shell. Highly repellent layers were prepared using this combination of a hydrophobic crystalline wax and silica nanoparticles.

Antibacterial Hydrogels for Wound Dressing Applications: Current Status, Progress, Challenges, and Trends.

Bacterial infection treatment for chronic wounds has posed a major medical threat and challenge. Bacteria at the wounded sites can compete with the immune system and subsequently invade live tissues, leading to more severe tissue damage. Therefore, there is an urgent demand for wound dressings with antibacterial and anti-inflammatory properties.

Fabrication and properties of conductive films based on bacterial cellulose and poly-N-isopropylacrylamide-modified graphene oxide.

A conductive film (PNIPAM-rGO/BC) was fabricated combining bacterial cellulose (BC) with poly-N-isopropylacrylamide-modified graphene oxide (PNIPAM-GO) through vacuum filtration and steam reduction techniques. The conductivity and performance of PNIPAM-GO composite and the resulting conductive film were studied. The key findings revealed that PNIPAM-GO composite exhibited a reversible temperature-sensitive behavior.

Transcutaneous Electrical Nerve Stimulation Integrated into Pants for the Relief of Postoperative Pain in Hip Surgery Patients: A Randomized Trial.

Background: The effect of transcutaneous electrical nerve stimulation (TENS) on pain and impression of change was assessed during a 2.5-hour intervention on the first postoperative days following hip surgery in a randomized, single-blinded, placebo-controlled trial involving 30 patients.

Methods: Mixed-frequency TENS (2 Hz/80 Hz) was administered using specially designed pants integrating modular textile electrodes to facilitate stimulation both at rest and during activity.

Dry gel spinning of fungal hydrogels for the development of renewable yarns from food waste.

Background: Renewable materials made using environmentally friendly processes are in high demand as a solution to reduce the pollution created by the fashion industry. In recent years, there has been a growing trend in research on renewable materials focused on bio-based materials derived from fungi.

Results: Recently, fungal cell wall material of a chitosan producing fungus has been wet spun to monofilaments.

Flexible phase change film based on lignin-derived porous carbon/Eicosane for wearable thermal management and microwave absorption.

A flexible phase-change film with thermal management and microwave absorption capabilities was developed for use in wearable devices. The film was created using a solution casting method based on a porous carbon-loaded eicosane (LP33/EI) material. LP33 served as the porous encapsulation medium, while Eicosane (EI) acted as the phase change component.

Glassware Influences the Perception of Orange Juice in Simulated Naturalistic versus Urban Conditions.

The latest research demonstrates that people's perception of orange juice can be influenced by the shape/type of receptacle in which it happens to be served. Two studies are reported that were designed to investigate the impact, if any, that the shape/type of glass might exert over the perception of the contents, the emotions induced on tasting the juice and the consumer's intention to purchase orange juice. The same quantity of orange juice (100 ml) was presented and evaluated in three different glasses: a straight-sided, a curved and a tapered glass.

Nanofiber-reinforced self-healing polysaccharide-based hydrogel dressings for pH discoloration monitoring and treatment of infected wounds.

The escalating global health concern arises from chronic wounds induced by bacterial infections, posing a significant threat to individuals. Consequently, an imperative exist for the development of hydrogel dressings to facilitate prompt wound monitoring and efficacious wound management. To this end, pH-sensitive bromothymol blue (BTB) and pH-responsive drug tetracycline hydrochloride (TH) were introduced into the polysaccharide-based hydrogel to realize the integration of wound monitoring and controlled treatment.

Emerging trends in CDs@hydrogels composites: from materials to applications.

Carbon dots (CDs) are nanoscale carbon materials with unique optical properties and biocompatibility. Their applications are limited by their tendency to aggregate or oxidize in aqueous environments. Turning weakness to strengths, CDs can be incorporated with hydrogels, which are three-dimensional networks of crosslinked polymers that can retain large amounts of water.

Covalently grafting polycation to bacterial cellulose for antibacterial and anti-cell adhesive wound dressings.

Hydrogel-based wound dressings are becoming increasingly important for wound healing. Bacterial cellulose (BC) has been commonly used as wound dressings due to its good in vitro and in vivo biocompatibility. However, pure BC does not possess antibacterial properties.