Automatic Detection of Fatigued Gait Patterns in Older Adults: An Intelligent Portable Device Integrating Force and Inertial Measurements with Machine Learning.

Purpose: This study aimed to assess the feasibility of early detection of fatigued gait patterns for older adults through the development of a smart portable device.

Methods: The smart device incorporated seven force sensors and a single inertial measurement unit (IMU) to measure regional plantar forces and foot kinematics. Data were collected from 18 older adults walking briskly on a treadmill for 60 min.

From Waste to Water Purification: Textile-Derived Sorbents for Pharmaceutical Removal.

The presence of pharmaceuticals or their active metabolites in receiving waters is a sign of the inefficient removal of bioactive substrates from wastewater. Adsorption seems to be the most effective and inexpensive method of their removal. Waste management aimed at sorbents is a promising way to sustain several sustainable development goals.

Colored Radiative Cooling and Flame-Retardant Polyurethane-Based Coatings: Selective Absorption/Reflection in Solar Waveband.

The aesthetic demand has become an imperative challenge to advance the practical and commercial application of daytime radiative cooling technology toward mitigating climate change. Meanwhile, the application of radiative cooling materials usually focuses on the building surface, related tightly to fire safety. Herein, the absorption and reflection spectra of organic and inorganic colorants are first compared in solar waveband, finding that iron oxides have higher reflectivity in NIR region.

Regulation of Electron Delocalization Region in 2D Heteroligand-Based Copper-Organic Framework to Enhance Charge Storage.

The rechargeable aqueous ammonium ion battery shows great potential in low-cost energy storage system because of its long life and environmental friendliness. However, most inorganic host materials used in ammonium ion batteries are still limited by slow diffusion kinetics. Herein, it is identified that a 2D heteroligand-based copper-organic framework featuring numerous ammonium ion adsorption site in the π-conjugated periodic skeleton supplies multiple accessible redox-active sites for high-performance ammonium storage.

Ladder-Type Redox-Active Polymer Achieves Ultra-Stable and Fast Proton Storage in Aqueous Proton Batteries.

A ladder-type rigid-coplanar polymer with highly ordered molecular arrangement has been designed via a covalent cycloconjugation conformational strategy. Benefitting from the extended π-electron delocalization in the highly aromatic ladder-type polymeric backbone, the prepared polymer exhibits fast intra-chain charge transport along the polymeric chain, realizing extraordinary proton-storage capability in aqueous proton batteries.Affordable and safe aqueous proton batteries (APBs) with unique "Grotthuss mechanism," are very significant for advancing carbon neutrality initiatives.

Bioinspired Multilayered Knitted Fabric with Directional Water Transport and Collection for Personal Sweat Management.

Effective sweat management fabric for sportswear facilitates sweat removal from the skin and elevates the comfort for human. However, when the body is in a strong hot and humid environment or after strenuous exercise, the sweat management fabric will be totally wetted and saturated quickly. As a result, excess sweat cannot be absorbed effectively by the garment, which creates obvious stickiness and heaviness.

Three-dimensional dynamic homogenous modeling: The biomechanical influences of leg tissue stiffness on pressure performance of compression biomedical therapeutic textiles.

Patient compliance and therapeutic precision of compression textiles (CTs) are frequently limited by the inaccurate pressure distributions along biological bodies in physical-based compression therapy. Therefore, the biomechanical influences of physiological tissue material characteristics of lower extremities on compression generations of CTs need to be explored systematically to improve pressure management efficacy. In this study, we developed three-dimensional (3D) homogenous finite element (FE) CT-leg systems to qualitatively compare the pressure diversities along lower limbs with different biomaterial tissue properties under each external compression level.

Integrated Wearable System for Monitoring Skeletal Muscle Force of Lower Extremities.

Continuous monitoring of lower extremity muscles is necessary, as the muscles support many human daily activities, such as maintaining balance, standing, walking, running, and jumping. However, conventional electromyography and physiological cross-sectional area methods inherently encounter obstacles when acquiring precise and real-time data pertaining to human bodies, with a notable lack of consideration for user comfort. Benefitting from the fast development of various fabric-based sensors, this paper addresses these current issues by designing an integrated smart compression stocking system, which includes compression garments, fabric-embedded capacitive pressure sensors, an edge control unit, a user mobile application, and cloud backend.

Smart-Adhesive, Breathable and Waterproof Fibrous Electronic Skins.

For the need of direct contact with the skin, electronic skins (E-skins) should not only fulfill electric functions, but also ensure comfort during wearing, including permeability, waterproofness, and easy removal. Herein, the study has developed a self-adhesive, detach-on-demand, breathable, and waterproof E-skin (PDSC) for motion sensing and wearable comfort by electrospinning styrene-isoprene block copolymer rubber with carbon black nanosheets as the sensing layer and liner copolymers of N, N-dimethylacrylamide, n-octadecyl acrylate and lauryl methacrylate as the adhesive layer. The high elasticity and microfiber network structure endow the PDSC with good sensitivity and high linearity for strain sensing.

Capillarity in Interfacial Liquids and Marbles: Mechanisms, Properties, and Applications.

The mechanics of capillary force in biological systems have critical roles in the formation of the intra- and inter-cellular structures, which may mediate the organization, morphogenesis, and homeostasis of biomolecular condensates. Current techniques may not allow direct and precise measurements of the capillary forces at the intra- and inter-cellular scales. By preserving liquid droplets at the liquid-liquid interface, we have discovered and studied ideal models, i.

Personalized compression therapeutic textiles: digital design, development, and biomechanical evaluation.

Physical-based external compression medical modalities could provide sustainable interfacial pressure dosages for daily healthcare prophylaxis and clinic treatment of chronic venous disease (CVD). However, conventional ready-made compression therapeutic textiles (CTs) with improper morphologies and ill-fitting of pressure exertions frequently limit patient compliance in practical application. Therefore, the present study fabricated the personalized CTs for various subjects through the proposed comprehensive manufacturing system.

Bipolar Textile Composite Electrodes Enabling Flexible Tandem Solid-State Lithium Metal Batteries.

A majority of flexible and wearable electronics require high operational voltage that is conventionally achieved by serial connection of battery unit cells using external wires. However, this inevitably decreases the energy density of the battery module and may cause additional safety hazards. Herein, a bipolar textile composite electrode (BTCE) that enables internal tandem-stacking configuration to yield high-voltage (6 to 12 V class) solid-state lithium metal batteries (SSLMBs) is reported.

Construction of a BiOI/ZnO heterojunction on biomass Juncus effusus fiber for photodegradation of organic pollutants.

Semiconductor heterojunction engineering and three-dimensional (3D) architecture construction have been considered highly desirable strategies to enhance photocatalytic performance. Herein, a BiOI/ZnO composite photocatalyst with a 3D flower-like architecture was successfully prepared, which was stably immobilized on three-dimensional porous lignocellulosic biomass Juncus effusus (JE) fiber. The outstanding photocatalytic performance of the BiOI/ZnO-JE fiber was confirmed by the degradation of tetracycline hydrochloride (TC, 90%), ciprofloxacin (CIP, 79%), and norfloxacin (NOR, 81%).

Efficacy of auxetic lattice structured shoe sole in advancing footwear comfort-From the perspective of plantar pressure and contact area.

Introduction: Designing footwear for comfort is vital for preventing foot injuries and promoting foot health. This study explores the impact of auxetic structured shoe soles on plantar biomechanics and comfort, motivated by the integration of 3D printing in footwear production and the superior mechanical properties of auxetic designs. The shoe sole designs proposed in this study are based on a three-dimensional re-entrant auxetic lattice structure, orthogonally composed of re-entrant hexagonal honeycombs with internal angles less than 90 degrees.

Magnetic-navigable silk fibroin microneedles for oral drug delivery: Ensuring long-lasting helicobacter pylori eradication and rapid hemostasis in the stomach.

The Helicobacter pylori infection in the stomach is the key reason for gastric mucosal bleeding. Eliminating gastric Helicobacter pylori by oral treatment remains difficult due to the presence of the gastric mucosal layer, which acts as a physical barrier to drugs via oral administration. In this study, a magnetic-navigable microneedle drug delivery platform (MNsD) for oral administration, featuring differential dual-mode drug release rate, was designed to fulfil rapid gastric hemostasis and overcome the gastric barriers for long-lasting Helicobacter pylori inhibition in stomach.

A bio-based durable reactive flame retardant for cotton fabric based on lentinan.

Cotton fabric has extensive application due to its comfort and breathability. However, the inherent flammability limits its wide application. Durable polysaccharide-based flame retardants with a low impact on the softness of fabrics are rarely reported.

UV-Permeable 3D Li Anodes for In Situ Fabrication of Interface-Gapless Flexible Solid-State Lithium Metal Batteries.

Flexible solid-state lithium metal batteries (SSLMBs) are highly desirable for future wearable electronics because of their high energy density and safety. However, flexible SSLMBs face serious challenges not only in regulating the Li plating/stripping behaviors but also in enabling the mechanical flexibility of the cell. Both challenges are largely associated with the interfacial gaps between the solid electrolytes and the electrodes.

Carbon Dots Derived from Non-Biomass Waste: Methods, Applications, and Future Perspectives.

Carbon dots (CDs) are luminescent carbon nanoparticles with significant potential in analytical sensing, biomedicine, and energy regeneration due to their remarkable optical, physical, biological, and catalytic properties. In light of the enduring ecological impact of non-biomass waste that persists in the environment, efforts have been made toward converting non-biomass waste, such as ash, waste plastics, textiles, and papers into CDs. This review introduces non-biomass waste carbon sources and classifies them in accordance with the 2022 Australian National Waste Report.

Empowering Photovoltaic Panel Anti-Icing: Superhydrophobic Organic Composite Coating with In Situ Photothermal and Transparency.

Solar energy is widely used in photovoltaic power generation as a kind of clean energy. However, the liquid film, frosting, and icing on the photovoltaic module seriously limit the efficiency of photovoltaic power generation. We developed a composite coating (Y6-NanoSH) by combining an in situ photothermal and transparent Y6 organic film with a nanosuperhydrophobic material.

pH-Responsive Theranostic Colloidosome Drug Carriers Enable Real-Time Imaging of Targeted Thrombolytic Process with Near-Infrared-II for Deep Venous Thrombosis.

Thrombosis can cause life-threatening disorders. Unfortunately, current therapeutic methods for thrombosis using injecting thrombolytic medicines systemically resulted in unexpected bleeding complications. Moreover, the absence of practical imaging tools for thrombi raised dangers of undertreatment and overtreatment.

Construction of multi-component finite element model to predict biomechanical behaviour of breasts during running and quantification of the stiffness impact of internal structure.

This study aims to investigate the biomechanical behaviour and the stiffness impact of the breast internal components during running. To achieve this, a novel nonlinear multi-component dynamic finite element method (FEM) has been established, which uses experimental data obtained via 4D scanning technology and a motion capture system. The data are used to construct a geometric model that comprises the rigid body, layers of soft tissues, skin, pectoralis major muscle, fat, ligaments and glandular tissues.

Aqueous Supramolecular Transformations of Motor Bola-Amphiphiles at Multiple Length-Scale.

Molecular motor amphiphiles have already been widely attempted for dynamic nanosystems across multiple length-scale for developments of small functional materials, including controlling macroscopic foam properties, amplifying motion as artificial molecular muscles, and serving as extracellular matrix mimicking cell scaffolds. However, limiting examples of bola-type molecular motor amphiphiles are considered for constructing macroscopic biomaterials. Herein, this work presents the designed two second generation molecular motor amphiphiles, motor bola-amphiphiles (MBAs).