Influence of Detonation Spraying Parameters on the Microstructure and Mechanical Properties of Hydroxyapatite Coatings.

The process of osteointegration depends significantly on the surface roughness, structure, chemical composition, and mechanical characteristics of the coating. In this regard, an important direction in the development of medical materials is the development of new techniques of surface modification and the creation of bioactive ceramic coatings. Calcium-phosphate materials based on hydroxyapatite have been proposed as bioactive ceramic coatings on titanium implants for the effective acceleration of bone tissue healing.

Investigation of Structural Phase, Mechanical, and Tribological Characteristics of Layer Gradient Heat-Protective Coatings Obtained by the Detonation Spraying Method.

This paper presents the results of a study of layer gradient thermal protection coatings based on NiCrAlY and YSZ obtained by detonation spraying. Modern gas turbines and high-temperature units operate under extreme temperatures and aggressive environments, which requires effective protection of components from wear, corrosion, and thermal shocks. In this study, the use of layer gradient coatings consisting of alternating layers of NiCrAlY and YSZ was investigated with the aim of solving the problem of thermal stress accumulation due to a smooth change in the composition of the layers.

Renewable Resources as Promising Materials for Obtaining Graphene Oxide-like Structures.

Currently, one of the topical directions in the field of production and application of graphene-like nanostructures is the use of renewable natural raw materials, which have unlimited resources for an economically efficient large-scale yield of a product with environmental safety. In this regard, we present the production of graphene oxide (GO) from a renewable natural raw material of plant biomass, birch activated carbon (BAC), and a comparison of the obtained physicochemical, mechanical, and electrical properties of birch activated carbon-graphene oxide (BAC-GO) and graphite-graphene oxide (G-GO) synthesized from the initial materials, BAC and graphite (G). Results obtained from this study confirm the successful oxidation of BAC, which correlates well with the physical-chemical dates of the G-GO and BAC-GO samples.

Nuclear-excited source of coherent and incoherent radiation with direct nuclear pumping.

Uranium fission fragments, as well as the products of He(n,p)H and B(n,α)Li nuclear reactions were utilized in the nuclear reactor for gas ionization and excitation. However, the Li(n,α)H nuclear reaction was less examined. The use of lithium-6 as a surface source of excitation of the gas medium, due to the long path length of tritium nuclei in the gas, allows to excite large volumes of gas as opposed to using U or B.

New insights into the anticancer therapeutic potential of icaritin and its synthetic derivatives.

Icaritin is a natural prenylated flavonoid derived from the Chinese herb Epimedium. The compound has shown antitumor effects in various cancers, especially hepatocellular carcinoma (HCC). Icaritin exerts its anticancer activity by modulating multiple signaling pathways, such as IL-6/JAK/STAT3, ER-α36, and NF-κB, affecting the tumor microenvironment and immune system.

A Study on Surface Hardening and Wear Resistance of AISI 52100 Steel by Ultrasonic Nanocrystal Surface Modification and Electrolytic Plasma Surface Modification Technologies.

In this study, a surface hardening of AISI 52100 bearing steel was performed by ultrasonic nanocrystal surface modification (UNSM), and electrolytic-plasma thermo-cyclic surface modification (EPSM), and their effects on the wear resistance were investigated. To evaluate the impact of these treatments on the wear resistance, the friction tests under dry conditions were conducted using a ball-on-disk tribometer in accordance with ASTM G99. The microstructure of the samples before and after treatment was characterized by scanning electron microscopy.

Synthesis and Investigation of Properties of Beryllium Ceramics Modified with Titanium Dioxide Nanoparticles.

Samples of beryllium ceramics, with the addition of micro- and nanoparticles TiO have been obtained by the method of thermoplastic slip casting. The microstructure of batch ceramics, consisting of micropowders and ceramics with TiO nanoparticles sintered at an elevated temperature, has been investigated. It was found that the introduction of TiO nanoparticles leads to changes in the mechanisms of mass transfer and microstructure formation, and the mobility of TiO at interfacial grain boundaries increases, which leads to the formation of elements of a zonal shell structure.

Influence of Diabase Filler on the Structure and Tribological Properties of Coatings Based on Ultrahigh Molecular Weight Polyethylene.

This article presents the results of a study of a composite coating made of ultrahigh molecular weight polyethylene (UHMWPE) with a diabase filler obtained by flame spraying. Diabase of 10 wt.%, 20 wt.

Effects of Electron Beam Irradiation on Mechanical and Tribological Properties of PEEK.

In this work, the mechanical and tribological characteristics of polyetheretherketone (PEEK) sheets were enhanced by electron beam irradiation. PEEK sheets irradiated at a speed of 0.8 m/min with a total dose of 200 kGy achieved the lowest specific wear rate of 4.

Effect of the Dislocation Substructure Parameters of Hadfield Steel on Its Strain Hardening.

This article presents a study of changes in the microstructure of Hadfield steel depending on the tensile deformation and cold rolling with the strain/stress level. It has been established that the change in the "σ-ε" curve (at ε = 5%) is accompanied by a 1.5-times decrease in the strain-hardening coefficient.

Effect of Bilayer Thickness and Bias Potential on the Structure and Properties of (TiZr/Nb)N Multilayer Coatings as a Result of Arc-PVD Deposition.

This work is devoted to the study of the formation of nanostructured multilayer coatings (TiZr/Nb)N on the surface of an AISI 321 steel substrate depending on the deposition parameters of the Arc-PVD method. The results of the X-ray diffraction analysis showed the formation of solid solution (TiNb)N and ZrN in the multilayer coatings with an FCC structure, ε-NbN with a hexagonal structure, as well as with a small volume fraction of the ε-TiN and β-NbN phase. On the basis of phase composition data, it is possible to assume that an increase in the number of bilayers leads to a decrease in the nitrogen concentration in the bilayers and, consequently, to a decrease in the volume fraction of ε-NbN and β-NbN nitrides.

Change of 0.34Cr-1Ni-Mo-Fe Steel Dislocation Structure in Plasma Electrolyte Hardening.

This work deals with the study of changes in the dislocation structure and quantitative characteristics, as well as morphological components, of 0.34Cr-1Ni-Mo-Fe steel before and after plasma electrolytic hardening. According to the electron microscopic studies of the fine structure of 0.