Osteogenic Potential and Long-Term Enzymatic Biodegradation of PHB-based Scaffolds with Composite Magnetic Nanofillers in a Magnetic Field.

Millions of people worldwide suffer from musculoskeletal damage, thus using the largest proportion of rehabilitation services. The limited self-regenerative capacity of bone and cartilage tissues necessitates the development of functional biomaterials. Magnetoactive materials are a promising solution due to clinical safety and deep tissue penetration of magnetic fields (MFs) without attenuation and tissue heating.

Aromaticity of biphenylene networks.

Magnetically induced ring-currents and magnetic susceptibilities have been calculated for the series of biphenylene sheets and biphenylene nanoribbons with armchair and zigzag edges with hydrogen atoms, as well as with bromine and fluorine atoms. Calculations have been performed at the density functional level of theory. It has been shown that biphenylene sheets and nanoribbons are characterized by dominant paratropic ring current, resulting in antiaromatic character.

Cardioprotective Action of the JNK Inhibitor Tryptanthrin Oxime in the Late Period after Myocardial Infarction.

In experiments on Wistar rats, the effect of a new selective JNK inhibitor tryptanthrin oxime (TR-Ox) on parameters of systemic hemodynamics, cardiohemodynamics, and post-infarction fibrosis was studied 4 months after acute myocardial ischemia (1 h) followed by reperfusion. TR-Ox was administered intraperitoneally at a dose of 12 mg/kg 20 min before reperfusion, and then once a day for the next 4 days. Administration of TR-Ox to animals in the acute phase of myocardial infarction contributed to more complete preservation of myocardial viability in the delayed period: a relative increase of muscle elements proportion in the scar, a decrease in the formation of connective tissue areas with complete and >50% replacement of the myocardium, and deceleration of fibrotic scarring in myocardium areas distant from the focus of injury, resulting in improved systolic and diastolic myocardial function.

Conceptual rationale for the use of chemically modified nanocomposites for active influence on atherosclerosis using the greater omentum model of experimental animals.

The use of chemically modified nanocomposites for atherosclerotic plaques can open up new opportunities for studying their effect on changing the structure of the plaque itself. It was shown on the model of the greater omentum of two groups of experimental animals (rats n = 30), which were implanted with Fe@C NPs nanocomposites of 10-30 Nm size into the omentum area. Group 1 (n = 15) consisted of animals that were implanted with chemically modified Fe@C NPs nanocomposites and control group 2 (n = 15) was with non-modified Fe@C NPs nanocomposites.

Optimization of 3D Printing Parameters of High Viscosity PEEK/30GF Composites.

The aim of this study was to optimize a set of technological parameters (travel speed, extruder temperature, and extrusion rate) for 3D printing with a PEEK-based composite reinforced with 30 wt.% glass fibers (GFs). For this purpose, both Taguchi and finite element methods (FEM) were utilized.

Nuclear-excited source of coherent and incoherent radiation with direct nuclear pumping.

Uranium fission fragments, as well as the products of He(n,p)H and B(n,α)Li nuclear reactions were utilized in the nuclear reactor for gas ionization and excitation. However, the Li(n,α)H nuclear reaction was less examined. The use of lithium-6 as a surface source of excitation of the gas medium, due to the long path length of tritium nuclei in the gas, allows to excite large volumes of gas as opposed to using U or B.

The Influence of Silver-Containing Bionanomaterials Based on Humic Ligands on Biofilm Formation in Opportunistic Pathogens.

The uncontrolled use of antibiotics has led to a global problem of antimicrobial resistance. One of the main mechanisms of bacterial resistance is the formation of biofilms. In order to prevent the growth of antimicrobial resistance, it is crucial to develop new antibacterial agents that are capable of inhibiting the formation of biofilms.

Correction: Badaraev et al. Surface Modification of Electrospun Bioresorbable and Biostable Scaffolds by Pulsed DC Magnetron Sputtering of Titanium for Gingival Tissue Regeneration. 2022, , 4922.

Aleksandra S [...

Tribological Characteristics of Fibrous Polyphthalamide-Based Composites.

The aim of this study was to investigate the tribological characteristics of commercially available high-strength polyphthalamide-based composites with great contents (30-50 wt.%) of both carbon and glass fibers in point and linear contacts against metal and ceramic counterfaces under dry friction and oil-lubricated conditions at various loads and sliding speeds. The lengths of both types of fibers were varied simultaneously with their contents while samples were fabricated from granules by injection molding.

Evaluation of Nitric Oxide-Donating Properties of 11-indeno[1,2-]quinoxalin-11-one Oxime (IQ-1) by Electron Paramagnetic Resonance Spectroscopy.

IQ-1 (11-indeno[1,2-]quinoxalin-11-one oxime) is a specific c-Jun N-terminal kinase (JNK) inhibitor with anticancer and neuro- and cardioprotective properties. Because aryloxime derivatives undergo cytochrome P450-catalyzed oxidation to nitric oxide (NO) and ketones in liver microsomes, NO formation may be an additional mechanism of IQ-1 pharmacological action. In the present study, electron paramagnetic resonance (EPR) of the Fe complex with diethyldithiocarbamate (DETC) as a spin trap and hemoglobin (Hb) was used to detect NO formation from IQ-1 in the liver and blood of rats, respectively, after IQ-1 intraperitoneal administration (50 mg/kg).

Phase I Clinical Evaluation of Designed Ankyrin Repeat Protein [Tc]Tc(CO)-(HE)-Ec1 for Visualization of EpCAM-Expressing Lung Cancer.

A high level of EpCAM overexpression in lung cancer makes this protein a promising target for targeted therapy. Radionuclide visualization of EpCAM expression would facilitate the selection of patients potentially benefiting from such treatment. Single-photon computed tomography (SPECT) using Tc-labeled engineered scaffold protein DARPin Ec1 has shown its effectiveness in imaging tumors with overexpression of EpCAM in preclinical studies, providing high contrast just a few hours after injection.

Comparative Evaluation of Neuroprotective Activity of Tryptanthrin and Its Oxime in Middle Cerebral Artery Occlusion in Rats.

The neuroprotective activity of tryptanthrin and its oxime was compared in male Wistar rats with a model of intraluminal occlusion of the middle cerebral artery. Neurobehavioral tests were performed 4, 24, and 48 h after focal cerebral infarction (FCI) using a modified neurological severity score (mNSS); additionally, the horizontal stability test, the plantar sensitivity test of the fore and hind limbs, holding on the tilted cage top test, and negative geotaxis test were performed. The size of FCI and the severity of brain tissue swelling were examined on day 2 after occlusion.

The Role of Triboloading Conditions in Tribolayer Formation and Wear Resistance of PES-Based Composites Reinforced with Carbon Fibers.

In this paper, the tribological characteristics of polyethersulfone-based composites reinforced with short carbon fibers (SCFs) at aspect ratios of 14-250 and contents of 10-30 wt.% are reported for linear metal-polymer and ceramic-polymer tribological contacts. The results showed that the wear resistance could be greatly improved through tribological layer formation.

Synthesis and Biological Activity of New Hydrazones Based on N-Aminomorpholine.

The data on the synthesis of N-aminomorpholine hydrazones are presented. It is shown that the interaction of N-aminomorpholine with functionally substituted benzaldehydes and 4-pyridinaldehyde in isopropyl alcohol leads to the formation of corresponding hydrazones. The structure of the synthesized compounds was studied by H and C NMR spectroscopy methods, including the COSY (H-H), HMQC (H-C) and HMBC (H-C) methodologies.

Phytochemical Composition and Biological Activity of the Essential Oil from Collected in Southwestern Montana, United States.

(Pall. ex Pursh) G.L.

Determination of Residual Stresses in 3D-Printed Polymer Parts.

This paper presents the results of an investigation of the possibility of the reliable determination of the residual stress-strain state in polymers and composites using a combination of bridge curvature, optical scanning, and finite element methods. A three-factor experiment was conducted to determine the strength of printed PLA plastic products. The effect of the residual stresses on the strength of the printed products was evaluated.

Droplet Microfluidic Method for Estimating the Dynamic Interfacial Tension of Ion-Crosslinked Sodium Alginate Microspheres.

The research focuses on optimizing the production of hydrogel microspheres using droplet microfluidics for pharmaceutical and bioengineering applications. A semiempirical method has been developed to predict the dynamic interfacial tension at the interface of . These microspheres are produced in a small-scale coaxial device that is manufactured using affordable DLP/LCD 3D printing technology with a transparent photopolymer.

Mechanistic insights into high-throughput screening of tandem catalysts for CO reduction to multi-carbon products.

In carbon dioxide electrochemical reduction (COER), since isolated catalysts encounter challenges in meeting the demands of intricate processes for producing multi-carbon (C) products, tandem catalysis is emerging as a promising approach. Nevertheless, there remains an insufficient theoretical understanding of designing tandem catalysts. Herein, we utilized density functional theory (DFT) to screen 80 tandem catalysts for efficient COER to C products systematically, which combines the advantages of nitrogen-doped carbon-supported transition metal single-atom catalysts (M-N-C) and copper clusters.

Color Centers in BaFBr Crystals: Experimental Study and Theoretical Modeling.

This study presents theoretical and experimental investigations into the electron and hole color centers in BaFBr crystals, characterizing their electronic and optical properties. Stoichiometric BaFBr crystals grown by the Steber method were used in the experiments. Radiation defects in BaFBr crystals were created by irradiation with 147 MeV Kr ions with up to fluences of 10-10 ions/cm.

Mild and General Protocol for Selective Deacetylation of Acetyl/Benzoyl-Protected Carbohydrates.

Herein, we report a mild and general protocol for chemoselective deacetylation of mixed acetyl- and benzoyl-protected carbohydrates under mild acidic conditions. The protocol allows quick access to partially protected carbohydrates, which serve as versatile synthetic intermediates during the total synthesis of various mono- and oligosaccharide targets. The applicability of the developed protocol was successfully demonstrated on a range of carbohydrate substrates of various configurations and substitution patterns featuring functionalized aliphatic and aromatic aglycones.

Oxidation Performance of Nano-Layered (AlTiZrHfTa)N/SiN Coatings Deposited by Reactive Magnetron Sputtering.

This work uses the direct current magnetron sputtering (DCMS) of equi-atomic (AlTiZrHfTa) and Si targets in dynamic sweep mode to deposit nano-layered (AlTiZrHfTa)N/SiN refractory high-entropy coatings (RHECs). Transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) are used to investigate the effect of Si addition on the oxidation behavior of the nano-layered coatings. The Si-free nitride coating exhibits FCC structure and columnar morphology, while the Si-doped nitride coatings present a FCC (AlTiZrHfTa)N/amorphous-SiN nano-layered architecture.

Community-Based View on Diagnostic Imaging at the End of COVID-19 Pandemic: Online Survey-Assisted Study.

(1) Background: An online survey-based observational cross-sectional study aimed at elucidating the experience and attitudes of an unstructured population regarding diagnostic imaging. (2) Methods: Invitations to participate were distributed using mixed-mode design to deidentified residents aged 18 years and older. Main outcome measures included morbidity structure and incidence of diagnostic imaging administrations.