Testing of various neutron filters in reference neutron field in LR-0 reactor for nuclear data validation and verification.

Neutron activation analysis is the reference method used for offline determination of the neutron flux density in defined positions. It can be used in the nuclear energy industry-as well as in medical- or space applications. For accurate neutron flux evaluation, well-known and reliable cross sections are needed.

Measurements of neutron transport of well defined silicon filtered beam in lead.

The correct description of neutron transport in lead is an essential task for correct description of tritium production in the DEMO (DEMOnstration Power Station) breeding blanket because some concepts deal with lead as a major component: namely the WCLL (water cooled lithium lead blanket), HCLL (helium cooled lithium lead blanket), and DCLL (dual cooled lithium lead blanket). Concerning the improvement of the knowledge about the transport of fast neutrons in lead, a set of experiments and calculations was carried out to study this problem with a well-defined neutron beam. The neutron flux behind various lead arrangements positioned along the beam axis was measured using a stilbene scintillation crystal (10 mm × 10 mm) with neutron and gamma pulse shape discrimination.

On similarity of various reactor spectra and U prompt fission neutron spectrum.

A well-defined neutron spectrum is an essential tool not only for calibration and testing of neutron detectors used in dosimetry and spectroscopy but also for validation and verification of evaluated cross sections. A new evaluation of thermal-neutron induced U PFNS was performed by the International Atomic Energy Agency (IAEA) in the CIELO (Collaborative International Evaluated Library Organisation Project) project; new measurements of Spectral Averaged Cross sections averaged in the evaluated spectrum are to be obtained. In general, a neutron spectrum in the core is not identical to the pure fission one because fission neutrons undergo many scattering reactions, but it can be shown that PFNS and reactor spectra become undistinguishable from a certain energy boundary.

Validation of zirconium isotopes (n,g) and (n,2n) cross sections in a comprehensive LR-0 reactor operative parameters set.

Zirconium is an important material used in most of reactor concepts for fuel cladding. Thus the knowledge of its cross section is important for reliable prediction of fuel operation. Also Zr(n,2n) reaction, is included in IRDFF files as dosimetry cross section standard.

Measurement of neutron spectra in a silicon filtered neutron beam using stilbene detectors at the LVR-15 research reactor.

A well-defined neutron spectrum is an essential tool for calibration and tests of spectrometry and dosimetry detectors, and evaluation methods for spectra processing. Many of the nowadays used neutron standards are calibrated against a fission spectrum which has a rather smooth energy dependence. In recent time, at the LVR-15 research reactor in Rez, an alternative approach was tested for the needs of fast neutron spectrometry detector calibration.

Measurement and calculation of fast neutron and gamma spectra in well defined cores in LR-0 reactor.

A well-defined neutron spectrum is essential for many types of experimental topics and is also important for both calibration and testing of spectrometric and dosimetric detectors. Provided it is well described, such a spectrum can also be employed as a reference neutron field that is suitable for validating selected cross sections. The present paper aims to compare calculations and measurements of such a well-defined spectra in geometrically similar cores of the LR-0 reactor with fuel containing slightly different enrichments (2%, 3.

Measurement of (23)Na(n,2n) cross section in well-defined reactor spectra.

The present paper aims to compare the calculated and experimental reaction rates of (23)Na(n,2n)(22)Na in a well-defined reactor spectra of a special core assembled in the LR-0 reactor. The experimentally determined reaction rate, derived using gamma spectroscopy of irradiated NaF sample, is used for average cross section determination. The resulting value averaged in spectra is 0.

Comparison of various hours living fission products for absolute power density determination in VVER-1000 mock up in LR-0 reactor.

Measuring power level of zero power reactor is a quite difficult task. Due to the absence of measurable cooling media heating, it is necessary to employ a different method. The gamma-ray spectroscopy of fission products induced within reactor operation is one of possible ways of power determination.

Determination of critical assembly absolute power using post-irradiation activation measurement of week-lived fission products.

The work presents a detailed comparison of calculated and experimentally determined net peak areas of longer-living fission products after 100 h irradiation on a reactor with power of ~630 W and several days cooling. Specifically the nuclides studied are (140)Ba, (103)Ru, (131)I, (141)Ce, (95)Zr. The good agreement between the calculated and measured net peak areas, which is better than in determination using short lived (92)Sr, is reported.

Absolute determination of power density in the VVER-1000 mock-up on the LR-0 research reactor.

The work presents a detailed comparison of calculated and experimentally determined net peak areas of selected fission products gamma lines. The fission products were induced during a 2.5 h irradiation on the power level of 9.

The effect of biological shielding on fast neutron and photon transport in the VVER-1000 mock-up model placed in the LR-0 reactor.

The paper is intended to show the effect of a biological shielding simulator on fast neutron and photon transport in its vicinity. The fast neutron and photon fluxes were measured by means of scintillation spectroscopy using a 45×45 mm(2) and a 10×10 mm(2) cylindrical stilbene detector. The neutron spectrum was measured in the range of 0.