Hardness and diametral tensile strength of a hybrid composite resin polymerized with different modes and immersed in ethanol or distilled water media.

Objectives: The aim of this in vitro study was to evaluate the microhardness and diametral tensile strength of a hybrid composite resin (Z250, 3M ESPE) polymerized with four different modes of light exposure and immersed in two different media.

Methods: Composite resin specimens were randomly polymerized according to the experimental groups (conventional, 550 mW/cm(2)/30 s; soft start, 300 mW/cm(2)/10 s + 550 mW/cm(2)/20 s; high intensity, 1060 mW/cm(2)/10 s; pulse delay, 550 mW/cm(2)/1 s + 60 s of waiting time + 550 mW/cm(2)/20 s) and immersed in one of two media (distilled water or absolute ethanol) for 24 h. After that, microhardness (M) and diametral tensile strength (DTS) tests were performed.

Fluoride-releasing capacity and cariostatic effect provided by sealants.

This study evaluated the effect of sealants on enamel demineralization, focusing on physical protection of the sealed enamel and fluoride protection of the adjacent unsealed enamel. Occlusal fissures with areas measuring 12 mm2 were delimited in 48 extracted molars, randomly divided into 4 groups (n =12): 1) no sealing; 2) sealing with a resin-modified glass-ionomer (Vitremer, 3M ESPE); 3) sealing with a fluoride-releasing composite sealant (Clinpro Sealant, 3M ESPE); and 4) sealing with a non-fluoridated composite sealant (Concise, 3M ESPE). A 4-mm2 window was outlined on the buccal enamel for analysis of fluoride uptake.

Use of statistical procedures in Brazilian and international dental journals.

A descriptive survey was performed in order to assess the statistical content and quality of Brazilian and international dental journals, and compare their evolution throughout the last decades. The authors identified the reporting and accuracy of statistical techniques in 1000 papers published from 1970 to 2000 in seven dental journals: three Brazilian (Brazilian Dental Journal, Revista de Odontologia da Universidade de Sao Paulo and Revista de Odontologia da UNESP) and four international journals (Journal of the American Dental Association, Journal of Dental Research, Caries Research and Journal of Periodontology). Papers were divided into two time periods: from 1970 to 1989, and from 1990 to 2000.

Influence of activation mode of dual-cured resin composite cores and low-viscosity composite liners on bond strength to dentin treated with self-etching adhesives.

Purpose: The objective of this study was to investigate the effect of light- or chemical initiation on the polymerization reaction of dual-cured composite core buildup materials (CM) with respect to their shear bond strength to dentin treated with self-etching adhesives (SE), in the presence or absence of a low-viscosity composite liner (LI).

Materials And Methods: Two SEs (Clearfil SE Bond and Unifil Core Bond), their respective CMs (DC Core Paste and Unifil Core), and a LI (Protect Liner F) were tested. After removing the labial enamel surfaces of 8 bovine incisors, each flat dentin surface was sectioned into 4 pieces with similar surface areas (30 mm2).

Mechanical stability of resin-dentin bond components.

Objectives: To evaluate the effects of long-term storage on the mechanical properties of the components of resin-dentin bonds, that is, resin composite, adhesive system, demineralized and mineralized dentin.

Methods: Specimens of resin composite (Z250) and adhesive systems (Single Bond-SB; One-Step-OS and Clearfil Liner Bond 2V-CL) were cast in molds. Dentin specimens were prepared from dentin discs obtained from the crowns of extracted human molars.

Prevalence of pacifier-sucking habits and successful methods to eliminate them--a preliminary study.

Purpose: The goal of this study was to verify the prevalence of nutritive (breast-feeding and bottle-feeding) and non-nutritive (pacifier) sucking habits, the methods used to eliminate them, and success of these methods.

Methods: To collect the data, 502 questionnaires were distributed to parents of 0- to 6-year-old children.

Results: Bottle-feeding was used by 83% and pacifier by 63% of children.

Occlusion of dentin tubules by desensitizing agents.

Purpose: To evaluate the occluding effect of five desensitizing agents on human dentin tubules.

Methods: 30 buccal and lingual surfaces were prepared from 15 extracted intact third molars. Each surface was polished with aluminum oxide abrasive papers to remove enamel and to expose the underlying dentin in cervical area.

Longitudinal study of transmission, diversity, and stability of Streptococcus mutans and Streptococcus sobrinus genotypes in Brazilian nursery children.

The aim of this study was to perform a follow-up evaluation of the Streptococcus mutans and Streptococcus sobrinus colonization profile of children's oral cavities, which included the pattern of vertical transmission from mother to child, genotypic diversity, and stability of the strains. The subjects were 16 mother-child pairs, who were monitored for 20 months. Samples of saliva, tongue dorsum, alveolar ridge mucosa, and dental plaque from the children were collected bimonthly.

Comparative analysis of Gtf isozyme production and diversity in isolates of Streptococcus mutans with different biofilm growth phenotypes.

Streptococcus mutans is the main pathogenic agent of dental caries. Glucosyltransferases (Gtfs) produced by these bacteria are important virulence factors because they catalyze the extracellular synthesis of glucans that are necessary for bacterial accumulation in the dental biofilm. The diversity of GtfB and GtfC isozymes was analyzed in 44 genotypes of S.

Effects of additional and extended acid etching on bonding to caries-affected dentine.

This study evaluated the effects of additional and extended acid etching on microtensile bond strength ( micro TBS) of two adhesive systems to sound (SD) and caries-affected dentine (CAD). Flat surfaces of CAD surrounded by SD of 36 extracted carious third molars were assigned to four treatments (i): self-etching adhesive system (Clearfil SE Bond) applied to dentine surfaces following manufacturer's instructions (MI); (ii) after additional etching for 15 s (35% phosphoric acid, PA); (iii) total-etch one-bottle adhesive (Single Bond) applied to dentine surfaces following MI; or (iv), after etching for 45 s with PA. Composite 'blocks' were built on bonded surfaces and restored teeth were vertically sectioned to obtain bonded slices of 0.

Ultramorphological analysis of resin-dentin interfaces produced with water-based single-step and two-step adhesives: nanoleakage expression.

This study evaluated the nanoleakage patterns in bonded interfaces using two single-step, self-etching adhesives (Adper Prompt-AD, and One-up Bond F-OB), two two-step, self-etching primers (Clearfil SE Bond-CF, and Unifil Bond-UB), and one two-step, total-etch adhesive (Single Bond-SB). Dentin surfaces were bonded with the adhesive systems and stored in water at 37 degrees C for 1 week and 6 months. After storage periods, teeth were sectioned into 0.

Time of initial acquisition of mutans streptococci by human infants.

The aim of this study was to detect and monitor the acquisition of mutans streptococci (MS) in healthy Brazilian children. Samples of 4 different sites (saliva, tongue dorsum, dental ridges, and dental plaque, if teeth were present) were collected from 33 edentulous nursery school infants (5.9+/-1.

Effect of carbamide peroxide bleaching agents on tensile strength of human enamel.

Objectives: The aim of this study was to evaluate the effects of low concentrations of carbamide peroxide bleaching agents (CP) on the ultimate tensile strength of enamel (UTS).

Methods: Resin composite structure was built-up on the bonded occlusal surface of 12 sound third molars to facilitate specimen preparation for microtensile testing. The bonded teeth were sectioned in a bucco-lingual direction in slices approximately 0.

Fracture resistance of roots endodontically treated with a new resin filling material.

Background: The authors evaluated the fracture resistance of endodontically treated teeth filled with either gutta-percha or a new resin-based obturation material.

Methods: The authors prepared and randomly divided 80 single-canal extracted teeth into five groups: lateral and vertical condensation with gutta-percha, lateral and vertical condensation with the new resin-based obturation material, and a control group with no filling material. The specimens were stored in 100 percent humidity for two weeks, mounted in polyester resin and loaded to failure.

Effects of storage media on mechanical properties of adhesive systems.

Purpose: To evaluate the effects of water vs. oil storage on the mechanical properties of dental adhesives over 3 and 6 months.

Methods: Adhesive resin sheets were prepared by pouring either Single Bond (SB), One-Step (OS) or Clearfil Liner Bond 2V (CL) into a mold measuring 15 x 15 x 0.

Effect of thermal and mechanical load cycling on microtensile bond strength of a total-etch adhesive system.

To evaluate the effect of thermal and mechanical cycles on dentin bond strength to cervical margins of Class II restorations, 80 box-type Class II cavities were prepared on the surfaces of bovine incisors. The cavities were restored with Single Bond (3M-ESPE) and Z-250 composite (3M-ESPE) according to manufacturer's instructions. The incisors were divided into four groups: G1-Control, G2- Thermal cycling (2,000 cycles, 5 degrees C-55 degrees C), G3- Mechanical cycling (100,000 cycles; 50N) and G4- Thermal and mechanical cycling (2,000 cycles 5 degrees C-55 degrees C/100,000 cycles; 50N).

Ultimate tensile strength of tooth structures.

Objective: This study determined the ultimate tensile strength (UTS) of enamel (E), dentin (D) and dentin-enamel junction (DEJ) using the microtensile technique. It was hypothesized that the UTS of dental structures varies according to location and nature.

Methods: Intact occlusal enamel surfaces from extracted human third molars were etched with 37% phosphoric acid and bonded with a one-bottle adhesive system.

High-concentrated carbamide peroxide bleaching agents effects on enamel surface.

Concern has been expressed regarding the adverse effects of peroxide-containing tooth bleaching agents on enamel surface. This study examined enamel average surface roughness before (baseline) and after an in-office bleaching protocol and investigated the influence of high concentrations of carbamide peroxide gels on its surface staining and morphology. Flat enamel surfaces were submitted to 35 and 37% carbamide peroxide or to no bleaching treatment (n = 10) and evaluated with a profilometer.

Use of 37% carbamide peroxide in the walking bleach technique: a case report.

Dental bleaching represents an effective, conservative, and relatively low-cost method for improving the appearance of discolored pulpless teeth. Among the bleaching techniques, the walking bleach technique with sodium perborate associated with water or hydrogen peroxide stands out because of its esthetic results and safety. A modified walking bleach technique with the use of 37% carbamide peroxide as the bleaching agent is presented.

Effect of resin liners on the microleakage of class V dental composite restorations.

Purpose: The aim of this study was to evaluate the effect of an adhesive applied in layers of different thickness or in association with a filled adhesive or with a low viscosity composite liner on the microleakage of composite restorations.

Methods: Forty bovine incisors were prepared with round cavities (4mm diameter X 2mm depth) on the cementoenamel junction. The teeth were assigned to four groups according to the liner used: 1 (control) - application of 1 layer of the Scotchbond Multi Purpose adhesive system (SBMP); 2 - application of 3 layers of SBMP; 3 - application of 1 layer of SBMP followed by application of one layer of Optibond FL adhesive; 4 - application of one layer of SBMP followed by application of flowable composite Flow-it.

A quantitative method of measuring the microleakage of thermocycled or non-thermocycled posterior tooth restorations.

This study quantified microleakage in restorations made with three packable resin composites-Solitaire, SureFil and P60; one hybrid resin composite-Z250 and an amalgam-Dispersalloy, with or without the thermocycling process. Sixty sound, freshly extracted human molars were sectioned mesiodistally, creating buccal and lingual blocks. One hundred blocks with the flattest surface were selected.

The effect of organic solvents on one-bottle adhesives' bond strength to enamel and dentin.

This study evaluated the microtensile bond strength (pTBS) of ethanol/water- and acetone-based, one-bottle adhesive systems to enamel (E) and dentin (D) in the presence (P) or absence (A) of their respective solvents. Thirty-two freshly extracted third molars were flattened with 600-grit SiC paper and restored with Single Bond (SB) or Prime&Bond 2.1 (PB) according to the manufacturers' instructions and after full solvent elimination.

Effect of non-vital tooth bleaching on microleakage of coronal access restorations.

This study evaluated the effect of non-vital tooth bleaching on microleakage of composite resin/bovine tooth interface at different post-bleaching times. A total of 320 teeth were cleaned. A pulp chamber access cavity was made at the lingual surface of each tooth.

Comparative study of the surface roughness of Ormocer-based and conventional composites.

The aim of this study was to evaluate the surface roughness of two Ormocer-based resin composites before and after mechanical toothbrushing. The study compared the brands Admira and Definite with composites based on conventional monomer systems (Bis-GMA, Bis-EMA, UEDMA e TEGDMA), Z250 and A110. Eight samples of each material with 4mm in diameter and 2mm in height were prepared using a metallic mold.

Occluding effect of dentifrices on dentinal tubules.

Objectives: The objective of this study was to evaluate the tubule occluding ability of three commercial available dentifrices (Sensodyne, Emoform and Sorriso) by Scanning Electron Microscopy.

Methods: Fifty cervical areas from buccal and lingual surfaces of sound third human molars were used. Cervical enamel was wet abraded to expose flat dentin surfaces and further polished with diamond pastes.