Microtensile bond strength of methacrylate and silorane resins to enamel and dentin.

The aim of this study was to evaluate the microtensile bond strength (µTBS) of two substrates (enamel and dentin) considering two study factors: type of composite resin [methacrylate-based (Filtek Supreme) or silorane-based (Filtek LS)] and aging time (24 h or 3 months). Twenty human molars were selected and divided into 2 groups (n=10) considering two dental substrates, enamel or dentin. The enamel and dentin of each tooth was divided into two halves separated by a glass plate.

Antimicrobial and Antiproliferative Potential of Anadenanthera colubrina (Vell.) Brenan.

The aim of the present study was to perform an in vitro analysis of the antimicrobial and antiproliferative potential of an extract from Anadenanthera colubrina (Vell.) Brenan (angico) and chemically characterize the crude extract. Antimicrobial action was evaluated based on the minimum inhibitory concentration (MIC), minimum bactericidal/fungicidal concentration, and the inhibition of formation to oral biofilm.

Hybridization quality and bond strength of adhesive systems according to interaction with dentin.

Objective: To evaluate the hybridization quality and bond strength of adhesives to dentin.

Materials And Methods: Ten human molars were ground to expose the dentin and then sectioned in four tooth-quarters. They were randomly divided into 5 groups according to the adhesive used: Two single-step self-etch adhesives - Adper Prompt (ADP) and Xeno III (XE), two two-step self-etching primer systems - Clearfil SE Bond (SE) and Adhe SE (ADSE), and one one-step etch-and-rinse system - Adper Single Bond (SB).

Tensile and flexural strength of commercially pure titanium submitted to laser and tungsten inert gas welds.

This study evaluated the tensile and flexural strength of tungsten inert gas (TIG) welds in specimens made of commercially pure titanium (CP Ti) compared with laser welds. Sixty cylindrical specimens (2 mm diameter x 55 mm thick) were randomly assigned to 3 groups for each test (n=10): no welding (control), TIG welding (10 V, 36 A, 8 s) and Nd:YAG laser welding (380 V, 8 ms). The specimens were radiographed and subjected to tensile and flexural strength tests at a crosshead speed of 1.

Molecular and structural evaluation of dentin caries-like lesions produced by different artificial models.

This study evaluated structural and molecular issues of dentin caries-like lesions produced by different artificial models (ACL) compared with natural caries lesions (NCL). One hundred twenty-four sound occlusal dentin blocks and 47 carious blocks were obtained and surface hardness was analyzed (SH1). They were assigned to groups according to ACL: GB: Biological; GC: Chemical; GIS: In situ; GNC: natural caries (control).

Effect of activation mode on shear bond strength of metallic brackets.

The aim of this study was to evaluate the shear bond strength (SBS) of metallic orthodontic brackets bonded to bovine teeth using light-activated or chemically activated composite resins. One hundred and twenty bovine mandibular incisors were divided into 6 groups (n=20), according to the bonding materials: Transbond XT (T); Enforce Dual (ED); Enforce chemical (EC); Enforce Light-activated (EL); Concise Orthodontic (C); and RelyX Unicem Capsule (UN). Metallic brackets were positioned and firmly bonded to the teeth.

Dimensional accuracy of stone casts made from silicone-based impression materials and three impression techniques.

The aim of this study was to measure and compare the dimensional accuracy of stone casts of a partially edentulous mandibular arch made by two condensation silicones, two addition silicones and three impression techniques (1-step putty/light-body, 2-step putty/light-body and monophase technique). A partially edentulous standard stainless steel mandibular arch cast was obtained with reference points on the permanent mandibular right and left canines, and permanent mandibular right and left second molars. The anteroposterior distances (between the mandibular left canine and second molar and between the mandibular right canine and second molar) and transverse distances (between the mandibular left and right canines and between the mandibular left and right second molars) of stainless steel cast were measured by a microscope at 30× magnification and 0.

Influence of photo-curing distance on bond strength and nanoleakage of self-etching adhesive bonds to enamel and dentin.

Objectives: To assess the influence of light-curing unit tip distance on the microtensile bond strength (μTBS) and nanoleakage of self-etching adhesives to enamel and dentin.

Materials And Methods: Flat buccal surfaces were prepared on 198 bovine incisors. The teeth were randomly assigned into nine groups for μTBS (n = 8) and nanoleakage (n = 3) testing according to the adhesive system (Clearfil Protect Bond, Clearfil Tri-S Bond or One Up Bond F Plus) and distance from the light-curing tip (0, 3 or 6 mm).

Fatigue resistance of CAD/CAM complete crowns with a simplified cementation process.

Statement Of Problem: Various computer-aided design and computer-aided manufacturing (CAD/CAM) materials are available to fabricate complete crowns. The type of material may have an effect on the longevity of these restorations.

Purpose: To evaluate the fatigue resistance, load-to-failure, failure mode, and antagonistic wear of complete molar computer-aided design and computer-aided manufacturing (CAD/CAM) crowns made of resin nanoceramic (RNC), feldspathic glass ceramic (FEL), or lithium disilicate (LD) placed with a simplified cementation process.

Concentration-dependent effect of sodium hypochlorite on stem cells of apical papilla survival and differentiation.

Introduction: Intracanal disinfection is a crucial step in regenerative endodontic procedures. Most published cases suggest the use of sodium hypochlorite (NaOCl) as the primary irrigant. However, the effect of clinically used concentrations of NaOCl on the survival and differentiation of stem cells is largely unknown.

Radioprotective effect of sodium selenite on developing teeth.

Radioprotective agents like selenium are used to reduce the damage caused by radiation in healthy tissues. The aim of this study was to evaluate the effect of sodium selenite on the development of the molars of offspring of rats irradiated during odontogenesis. Twenty pregnant rats were randomly divided into 4 groups: control, irradiated, selenium and selenium/irradiated.

Effect of replacing a component of a self-etch adhesive by chlorhexidine on bonding to dentin.

The purpose of this study was to evaluate the effect of replacing a component of the self-etch adhesive Adper Scotchbond SE (liquid A + liquid B) by 2% chlorhexidine (CHX) on bond strength to dentin after 1 day, 3 months or 6 months of water storage. Eight human teeth were sectioned to expose a flat dentin surface and were then randomly assigned to 2 groups. In the control group, the dentin surfaces were treated with the adhesive according to the manufacturer's instructions.

Zoledronic acid inhibits human osteoblast activities.

Background: Bisphosphonates are potent inhibitors of bone resorption. These kinds of drugs, which are used for the treatment of osteolytic diseases, have been associated with the occurrence of oral osteonecrosis, especially in patients over 60 years old. Current studies have demonstrated that the cytotoxic effects of bisphosphonates on osteoblasts play an important role in oral osteonecrosis development.

Bone repair is influenced by different particle sizes of anorganic bovine bone matrix: a histologic and radiographic study in vivo.

Purpose: The aim of this study was to analyze histologically and radiographically the influence of particle size of anorganic bovine bone matrix (ABBM) on bone repair.

Materials And Methods: Four calvarial defects of 8 mm each were prepared in 18 adult New Zealand rabbits. The defects were then filled with either particulate autogenous bone (control group) or ABBM of large, medium, and small size granules.

Failures in the rehabilitation treatment with removable partial dentures.

Background: Despite being functional and having aesthetic benefits, the acceptance of patients regarding the use of removable partial dentures (RPDs) has been low. In part, this is due to the deleterious effects that causes discomfort to the patient. Success depends not only on the care expended by the patient, including daily care and oral hygiene, but also on common goals set by their professional and clinical staff, aiming beyond aesthetics, to incorporate issues of functionality and the well-being of patients.

Zoledronic acid decreases gene expression of vascular endothelial growth factor and basic fibroblast growth factor by human epithelial cells.

Delayed wound healing in patients taking bisphosphonates could result from decreased expression of growth factors, which are directly related to cell proliferation and migration. In this study, we evaluated the gene expression of vascular endothelial growth factor (VEGF) and basic fibroblast growth factor (bFGF) by epithelial cells exposed to zoledronic acid 5 μmol for 48 h using real-time polymerase chain reaction. The gene expression of VEGF and bFGF by epithelial cells exposed to zoledronic acid decreased by 34% and 51%, respectively (p=0.

Effects of zoledronic acid on odontoblast-like cells.

The aim of the study was to evaluate the effects of a highly potent bisphosphonate, zoledronic acid (ZOL), on cultured odontoblast-like cells MDPC-23. The cells (1.5×10(4)cells/cm(2)) were seeded for 48h in wells of 24-well dished.

Surface characterisation and bonding of Y-TZP following non-thermal plasma treatment.

Objectives: (1) To chemically characterise Y-TZP surface via X-ray photoelectron spectroscopy (XPS) and evaluate the surface energy levels (SE) after non-thermal plasma (NTP). (2) To test the microtensile bond strength (MTBS) of Y-TZP bonded to cured composite disks, after a combination of different surface conditioning methods.

Methods: Twenty-four Y-TZP discs (13.

Straight and offset implant placement under axial and nonaxial loads in implant-supported prostheses: strain gauge analysis.

Purpose: The aim of this in vitro study was to quantify strain development during axial and nonaxial loading using strain gauge analysis for three-element implant-supported FPDs, varying the arrangement of implants: straight line (L) and offset (O).

Materials And Methods: Three Morse taper implants arranged in a straight line and three implants arranged in an offset configuration were inserted into two polyurethane blocks. Microunit abutments were screwed onto the implants, applying a 20 Ncm torque.

Effect of adhesive system and application strategy on reduction of dentin permeability.

This study evaluated the effect of adhesive systems and application strategies on dentin hydraulic conductance (HC). The buccal enamel was removed from bovine incisors to simulate laminate cavity preparations. After removing the roots and the coronal pulp, the buccal dentin was treated with EDTA solution (0.

Influence of light source and extended time of curing on microhardness and degree of conversion of different regions of a nanofilled composite resin.

Objectives: The aim of this study was to evaluate the effects of different light sources and curing time on the degree of conversion and microhardness of two surfaces within a nanofilled composite resin.

Methods: Four experimental groups (n=10) were formed in accordance with the light source (quartz-tungsten halogen (QTH - 600mW/cm(2)), or light-emitting-diode (LED - 800mW/cm(2))) and the time of curing (20 s or 40 s). The specimens were prepared with a circular mould (5 mm ∅ and 2 mm thick), according to the respective protocol, and the Knoop microhardness and degree of conversion was measured at the top and the base of the specimens.

Biostimulatory effect of low-level laser therapy on keratinocytes in vitro.

Epithelial cells play an important role in reparative events. Therefore, therapies that can stimulate the proliferation and metabolism of these cells could accelerate the healing process. To evaluate the effects of low-level laser therapy (LLLT), human keratinocytes were irradiated with an InGaAsP diode laser prototype (LASERTable; 780 ± 3 nm; 40 mW) using 0.

Influence of chemical or physical catalysts on high concentration bleaching agents.

Objectives: The aim of this in vitro study was to evaluate the bleaching efficacy of high concentration bleaching agents activated by chemical or physical catalysts.

Materials And Methods: This study was divided into two parts. Part 1 evaluated the efficacy of tooth whitening after treatment with 35% hydrogen peroxide (Whiteness HP Maxx) that was activated by different light-curing units: halogen lamp (conventional and bleach mode) (Optilux 501C, Demetron/Kerr), LED first generation (Ultrablue IV, DMC), LED/diode laser (Ultrablue IV, DMC), LED second generation (Bluephase 16i, Ivoclar Vivadent), and no light source (control group).

Influence of previous acid etching on interface morphology and bond strength of self-etching adhesive to cavosurface enamel.

Objectives: The aim of this study was to evaluate the (1) bond strength of a etch-and-rinse and self-etching adhesive systems to cavosurface enamel, (2) influence of the previous acid etching with phosphoric acid 35% to the self-etching adhesive application on bond strength values, and (3) analysis of the cavosurface enamel morphology submitted to different types of conditioning, with the use of a scanning electronic microscope (SEM).

Methods: Twenty four human third molars were sectioned on mesio-distal direction, resulting in two slices. The specimens were ground flat with 600-grit aluminum oxide papers, and were randomly divided into three groups: Group 1 (etch-and-rinse adhesive system (control group)), Group 2 (self-etching adhesive), and Group 3 (self-etching adhesive with previous 35% phosphoric acid-etching for 15 s).