Single-step microwave-assisted hot water extraction of hemicelluloses from selected lignocellulosic materials - A biorefinery approach.

The viability of single-step microwave-induced pressurized hot water conditions for co-production of xylan-based biopolymers and bioethanol from aspenwood sawdust and sugarcane trash was investigated. Extraction of hemicelluloses was conducted using microwave-assisted pressurized hot water system. The effects of temperature and time on extraction yield and enzymatic digestibility of resulting solids were determined.

Temperature stability of nanocellulose dispersions.

Cellulose nanofibrils (CNF) have potential as rheology modifiers of water based fluids, e.g. drilling fluids for use in oil wells or as additives in injection water for enhanced oil recovery (EOR).

An investigation of Pseudomonas aeruginosa biofilm growth on novel nanocellulose fibre dressings.

Nanocellulose from wood is a novel biomaterial, which is highly fibrillated at the nanoscale. This affords the material a number of advantages, including self-assembly, biodegradability and the ability to absorb and retain moisture, which highlights its potential usefulness in clinical wound-dressing applications. In these in vitro studies, the wound pathogen Pseudomonas aeruginosa PAO1 was used to assess the ability of two nanocellulose materials to impair bacterial growth (<48 h).

3D Bioprinting of Carboxymethylated-Periodate Oxidized Nanocellulose Constructs for Wound Dressing Applications.

Nanocellulose has a variety of advantages, which make the material most suitable for use in biomedical devices such as wound dressings. The material is strong, allows for production of transparent films, provides a moist wound healing environment, and can form elastic gels with bioresponsive characteristics. In this study, we explore the application of nanocellulose as a bioink for modifying film surfaces by a bioprinting process.

Three-dimensional microstructural properties of nanofibrillated cellulose films.

Nanofibrillated cellulose (NFC) films have potential as oxygen barriers for, e.g., food packaging applications, but their use is limited by their hygroscopic characteristics.

Pretreatment-dependent surface chemistry of wood nanocellulose for pH-sensitive hydrogels.

Nanocellulose from wood is a promising material with potential in various technological areas. Within biomedical applications, nanocellulose has been proposed as a suitable nano-material for wound dressings. This is based on the capability of the material to self-assemble into 3D micro-porous structures, which among others have an excellent capacity of maintaining a moist environment.

The effect of residual fibres on the micro-topography of cellulose nanopaper.

Nanopaper is a new material concept composed of nanocellulose, which has been proposed for a series of applications. Recently, the surface of nanopapers has also been emphasized as an important structure to control. This is due to the potential of nanopaper structures as a substrate for printing functionality, which could expand the applicability of nanopaper as a functionalized biomaterial.

Optical methods for the quantification of the fibrillation degree of bleached MFC materials.

In this study, the suitability of optical devices for quantification of the fibrillation degree of bleached microfibrillated cellulose (MFC) materials has been assessed. The techniques for optical assessment include optical scanner, UV-vis spectrophotometry, turbidity, quantification of the fiber fraction and a camera system for dynamic measurements. The results show that the assessed optical devices are most adequate for quantification of the light transmittance of bleached MFC materials.

A method for estimating the fibre length in fibre-PLA composites.

Wood pulp fibres are an important component of environmentally sound and renewable fibre-reinforced composite materials. The high aspect ratio of pulp fibres is an essential property with respect to the mechanical properties a given composite material can achieve. The length of pulp fibres is affected by composite processing operations.

Micro-structural characterisation of homogeneous and layered MFC nano-composites.

The complementary capabilities of various characterisation methods for micro-structural assessment are demonstrated. The assessed structures were composed of unbleached microfibrillated cellulose (MFC) in combination with bleached and 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO) pre-treated MFC materials. The biodegradable nano-composites were thus characterised in detail, including laser profilometry, scanning electron microscopy (SEM) in high and low vacuum modes, and field-emission SEM.

On the structure and oxygen transmission rate of biodegradable cellulose nanobarriers.

Cellulose nanofibrils have been proposed for novel barrier concepts, based on their capability to form smooth, strong and transparent films, with high oxygen barrier properties. A series of cellulose-based films were manufactured and tested with respect to their oxygen transmission rate (OTR) capabilities. The obtained OTR levels were considerably better than the levels recommended for packaging applications.

Cross-linking cellulose nanofibrils for potential elastic cryo-structured gels.

Cellulose nanofibrils were produced from P. radiata kraft pulp fibers. The nanofibrillation was facilitated by applying 2,2,6,6-tetramethylpiperidinyl-1-oxyl-mediated oxidation as pretreatment.

Cellulose fibres, nanofibrils and microfibrils: The morphological sequence of MFC components from a plant physiology and fibre technology point of view.

During the last decade, major efforts have been made to develop adequate and commercially viable processes for disintegrating cellulose fibres into their structural components. Homogenisation of cellulose fibres has been one of the principal applied procedures. Homogenisation has produced materials which may be inhomogeneous, containing fibres, fibres fragments, fibrillar fines and nanofibrils.

Structural quantification of wood fibre surfaces--morphological effects of pulping and enzymatic treatment.

Wood fibres have been utilized by our society as an important component of paper products and are presently gaining more interest as reinforcement in composite materials. During the last decades biochemical treatments have also found applications in the processing of wood fibres. The chemical, mechanical and biochemical treatments affect the morphology of the fibre wall structure at the micro- and nano-level.

Exploring the multi-scale structure of printing paper--a review of modern technology.

Printing paper is an important communication and information medium affecting our daily activities in several ways. The structure of paper may affect its optical, mechanical, fluid transport and print properties. In order to achieve a complete understanding of these processes a comprehensive characterization of relevant surface and bulk structures of paper is necessary.

Computer-assisted scanning electron microscopy of wood pulp fibres: dimensions and spatial distributions in a polypropylene composite.

A shape description approach is introduced as a step for performing an automatic processing of fibre cross-sectional images. The approach, in combination with appropriate mathematical morphology, yields edited images, which are suitable for further computerized image analysis. Important parameters such as fibre wall thickness, fibre perimeter, form factor and collapse index are quantified effectively and objectively.

New advances in the 3D characterization of mineral coating layers on paper.

The surface characteristics of a large set of commercial lightweight coated paper grades are explored. The quantification of the 3D structure is revealed by atomic force microscopy, laser profilometry and X-ray microtomography. This comprehensive study demonstrates the suitability of different and modern methods for assessing critical coating layer properties, thus identifying the right tools for specific structural analyses.