Converting a batch based high-shear granulation process to a continuous dry granulation process; a demonstration with ketoprofen tablets.

When one wishes to convert a batch based manufacturing process of an existing tablet product to a continuous process, there are several available strategies which can be adopted. Theoretically, the most straightforward way would be to proceed with the corresponding processing principles, for example to change a wet granulation (WG) batch process into its continuous WG counterpart. However, in some cases, the choice of roller compaction (RC) could be very attractive due to the notably simpler and inherently continuous nature of the RC manufacturing principle.

Simultaneous investigation of the liquid transport and swelling performance during tablet disintegration.

Fast disintegrating tablets have commonly been used for fast oral drug delivery to patients with swallowing difficulties. The different characteristics of the pore structure of such formulations influence the liquid transport through the tablet and hence affect the disintegration time and the release of the drug in the body. In this work, terahertz time-domain spectroscopy and terahertz pulsed imaging were used as promising analytical techniques to quantitatively analyse the impact of the structural properties on the liquid uptake and swelling rates upon contact with the dissolution medium.

Measurement of residence time distributions and material tracking on three continuous manufacturing lines.

Over the recent decade, benefits of continuous manufacturing (CM) of pharmaceutical products have been acknowledged widely. In contrast to batch processes, the product is not physically separated into batches in CM, which creates a few challenges. Product release is done for batches that should have a uniform quality over time, materials need to be tracked along the line, and locations to reject product must be established.

Comparison between integrated continuous direct compression line and batch processing - The effect of raw material properties.

There is a current trend in pharmaceutical manufacturing to shift from traditional batch manufacture to continuous manufacturing. The purpose of this study was to test the ability of an integrated continuous direct compression (CDC) line, in relation to batch processing, to achieve consistent tablet quality over long processing periods for formulations with poor flow properties or with a tendency to segregate. The study design included four industrially relevant formulations with different segregation indices and flow properties induced through different grades of the Active Pharmaceutical Ingredient (API), paracetamol, and major filler as well as varying the amount of API.

The effects of unintentional and intentional process disturbances on tablet quality during long continuous manufacturing runs.

Several kinds of process disturbances can occur during (continuous) tablet manufacturing, i.e. unintentional or intentional disturbances.

RTD-based material tracking in a fully-continuous dry granulation tableting line.

Continuous manufacturing (CM) offers quality and cost-effectiveness benefits over currently dominating batch processing. One challenge that needs to be addressed when implementing CM is traceability of materials through the process, which is needed for the batch/lot definition and control strategy. In this work the residence time distributions (RTD) of single unit operations (blender, roller compactor and tablet press) of a continuous dry granulation tableting line were captured with NIR based methods at selected mass flow rates to create training data.

Investigating elastic relaxation effects on the optical properties of functionalised calcium carbonate compacts using optics-based Heckel analysis.

Heckel analysis is a widely used method for the characterisation of the compression behaviour of pharmaceutical samples during the preparation of solid dosage formulations. The present study introduces an optical version of the Heckel equation that is based on a combination of the conventional Heckel equation together with the linear relationship defined between the effective terahertz (THz) refractive index and the porosity of pharmaceutical tablets. The proposed optical Heckel equation allows us to, firstly, calculate the zero-porosity refractive index, and, secondly, predict the in-die development of the effective refractive index as a function of the compressive pressure during tablet compression.

Control of three different continuous pharmaceutical manufacturing processes: Use of soft sensors.

One major advantage of continuous pharmaceutical manufacturing over traditional batch manufacturing is the possibility of enhanced in-process control, reducing out-of-specification and waste material by appropriate discharge strategies. The decision on material discharge can be based on the measurement of active pharmaceutical ingredient (API) concentration at specific locations in the production line via process analytic technology (PAT), e.g.

Characterisation of pore structures of pharmaceutical tablets: A review.

Traditionally, the development of a new solid dosage form is formulation-driven and less focus is put on the design of a specific microstructure for the drug delivery system. However, the compaction process particularly impacts the microstructure, or more precisely, the pore architecture in a pharmaceutical tablet. Besides the formulation, the pore structure is a major contributor to the overall performance of oral solid dosage forms as it directly affects the liquid uptake rate, which is the very first step of the dissolution process.

Lubricant based determination of design space for continuously manufactured high dose paracetamol tablets.

The objective of this study was to devise robust and stable continuous manufacturing process settings, by exploring the design space after an investigation of the lubrication-based parameters influencing the continuous direct compression tableting of high dose paracetamol tablets. Experimental design was used to generate a structured study plan which involved 19 runs. The formulation variables studied were the type of lubricant (magnesium stearate or stearic acid) and its concentration (0.

Fast and non-destructive pore structure analysis using terahertz time-domain spectroscopy.

Pharmaceutical tablets are typically manufactured by the uni-axial compaction of powder that is confined radially by a rigid die. The directional nature of the compaction process yields not only anisotropic mechanical properties (e.g.

Provoking an end-to-end continuous direct compression line with raw materials prone to segregation.

Continuous manufacturing of solid oral dosage forms is promising for increasing the efficiency and quality of pharmaceutical production and products. In this study a whole train continuous direct compression (CDC) line has been provoked using challenging formulations typically prone to segregation in batch powder processing. Industrial compositions including components with variable size, bulk density and cohesive nature were selected.

On the role of API in determining porosity, pore structure and bulk modulus of the skeletal material in pharmaceutical tablets formed with MCC as sole excipient.

The physical properties and mechanical integrity of pharmaceutical tablets are of major importance when loading with active pharmaceutical ingredient(s) (API) in order to ensure ease of processing, control of dosage and stability during transportation and handling prior to patient consumption. The interaction between API and excipient, acting as functional extender and binder, however, is little understood in this context. The API indomethacin is combined in this study with microcrystalline cellulose (MCC) at increasing loading levels.

Optics-based compressibility parameter for pharmaceutical tablets obtained with the aid of the terahertz refractive index.

The objective of this study is to propose a novel optical compressibility parameter for porous pharmaceutical tablets. This parameter is defined with the aid of the effective refractive index of a tablet that is obtained from non-destructive and contactless terahertz (THz) time-delay transmission measurement. The optical compressibility parameter of two training sets of pharmaceutical tablets with a priori known porosity and mass fraction of a drug was investigated.

Characterization of the Pore Structure of Functionalized Calcium Carbonate Tablets by Terahertz Time-Domain Spectroscopy and X-Ray Computed Microtomography.

Novel excipients are entering the market to enhance the bioavailability of drug particles by having a high porosity and, thus, providing a rapid liquid uptake and disintegration to accelerate subsequent drug dissolution. One example of such a novel excipient is functionalized calcium carbonate, which enables the manufacture of compacts with a bimodal pore size distribution consisting of larger interparticle and fine intraparticle pores. Five sets of functionalized calcium carbonate tablets with a target porosity of 45%-65% were prepared in 5% steps and characterized using terahertz time-domain spectroscopy and X-ray computed microtomography.

Noninvasive porosity measurement of biconvex tablets using terahertz pulses.

Biconvex pharmaceutical microcrystalline cellulose (MCC) compacts were investigated by the detection of terahertz (THz) pulse delay in the transmission measurement mode. The dimensions of the tablets were kept as constants but the porosity was a priori known variable. It is shown that the porosity of the biconvex compact has a linear correlation with the THz pulse delay.

Terahertz study on porosity and mass fraction of active pharmaceutical ingredient of pharmaceutical tablets.

In this study, terahertz time-domain spectroscopic (THz-TDS) technique has been used to ascertain the change in the optical properties, as a function of changing porosity and mass fraction of active pharmaceutical ingredient (API), of training sets of pharmaceutical tablets. Four training sets of pharmaceutical tablets were compressed with microcrystalline cellulose (MCC) excipient and indomethacin API by varying either the porosity, height, and API mass fraction or all three tablet parameters. It was observed, as far as we know, for the first time, that the THz time-domain and frequency-domain effective refractive index, as well as, the frequency-domain effective absorption coefficient both show linear correlations with the porosity and API mass fraction for training sets of real pharmaceutical tablets.

A structure parameter for porous pharmaceutical tablets obtained with the aid of Wiener bounds for effective permittivity and terahertz time-delay measurement.

A structure parameter that can be used to predict the pattern of arrangement of porous inclusions in pharmaceutical tablets is introduced. By utilizing the effective refractive index of a pharmaceutical tablet obtained from terahertz time-domain measurements, we have shown that there exists a promising correlation between the calculated structural parameter and the porosity of training sets of pharmaceutical tablets, having well-defined characterization. Knowing of the structural arrangement, i.

Continuous manufacturing of tablets with PROMIS-line - Introduction and case studies from continuous feeding, blending and tableting.

Drug manufacturing technology is in the midst of modernization and continuous manufacturing of drug products is especially the focus of great interest. The adoption of new manufacturing approaches requires extensive cooperation between industry, regulatory bodies, academics and equipment manufacturers. In this paper we introduce PROMIS-line which is a continuous tableting line built at the University of Eastern Finland, School of Pharmacy, PROMIS-centre.

Estimation of Young's modulus of pharmaceutical tablet obtained by terahertz time-delay measurement.

In this paper, it is suggested that Young's modulus of pharmaceutical tablets with different porosity can be estimated from terahertz (THz) pulse time delay. We demonstrate such a possibility using a training set of tablets compressed from starch acetate. Once the mechanical properties are taught to the THz measurement system, using an ideal tablet as a reference, it is possible to get information about the Young's modulus of the tablet.

Non-contact weight measurement of flat-faced pharmaceutical tablets using terahertz transmission pulse delay measurements.

By measuring the time delay of a terahertz pulse traversing a tablet, and hence its effective refractive index, it is possible to non-invasively and non-destructively detect the weight of tablets made of microcrystalline cellulose (MCC). Two sets of MCC tablets were used in the study: Set A (training set) consisted of 13 tablets with nominally constant height but varying porosities, whereas Set B (test set) comprised of 21 tablets with nominally constant porosity but different heights. A linear correlation between the estimated absolute weight based on the terahertz measurement and the measured weight of both sets of MCC tablets was found.

Validation of a multipoint near-infrared spectroscopy method for in-line moisture content analysis during freeze-drying.

This study assessed the validity of a multipoint near-infrared (NIR) spectroscopy method for in-line moisture content analysis during a freeze-drying process. It is known that the moisture content affects the stability of a freeze-dried product and hence it is a major critical quality attribute. Therefore assessment of the validity of an analytical method for moisture content determination is vital to ensure the quality of the final product.

Near-infrared imaging for high-throughput screening of moisture induced changes in freeze-dried formulations.

Evaluation of freeze-dried biopharmaceutical formulations requires careful analysis of multiple quality attributes. The aim of this study was to evaluate the use of near-infrared (NIR) imaging for fast analysis of water content and related physical properties in freeze-dried formulations. Model formulations were freeze-dried in well plates.

Detection of porosity of pharmaceutical compacts by terahertz radiation transmission and light reflection measurement techniques.

We report on the non-destructive quantification of the porosity of pharmaceutical compacts (microcrystalline cellulose tablets) by using both optical and terahertz techniques. For the full analysis of the porosity of pharmaceutical tablets, the results obtained in both cases have shown that optical and terahertz techniques are complementary. The intrinsic refractive index of microcrystalline cellulose was estimated using the effective refractive index obtained from the time delay of the THz pulse together with the Bruggeman model for effective media.

In-line multipoint near-infrared spectroscopy for moisture content quantification during freeze-drying.

During the past decade, near-infrared (NIR) spectroscopy has been applied for in-line moisture content quantification during a freeze-drying process. However, NIR has been used as a single-vial technique and thus is not representative of the entire batch. This has been considered as one of the main barriers for NIR spectroscopy becoming widely used in process analytical technology (PAT) for freeze-drying.