Can severity of trunnion damage be estimated by visual inspection alone?

Taper corrosion has been widely reported to be problematic for modular total hip arthroplasty implants. A simple and systematic method to evaluate taper damage with sufficient resolution is needed. We introduce a semiquantitative grading system for modular femoral tapers to characterize taper corrosion damage.

Evaluation of Topology Optimization Using 3D Printing for Bioresorbable Fusion Cages: A Biomechanical Study in a Porcine Model.

Study Design: Preclinical biomechanical study of topology optimization versus standard ring design for bioresorbable poly-ε-caprolactone (PCL) cervical spine fusion cages delivering bone morphogenetic protein-2 (BMP-2) using a porcine model.

Objective: The aim was to evaluate range of motion (ROM) and bone fusion, as a function of topology optimization and BMP-2 delivery method.

Summary Of Background Data: 3D printing technology enables fabrication of topology-optimized cages using bioresorbable materials, offering several advantages including customization, and lower stiffness.

Load Sharing in the Femur Using Strut Allografts: A Biomechanical Study.

Background: Femoral strut allografts are used in revision hip arthroplasty for management of bone loss associated with implant failure or periprosthetic fractures. They have also been used to treat unremitting thigh pain in well-fixed cementless femoral stems, to address the differential in structural stiffness between the stem and femoral shaft. Our study used an in vitro biomechanical model to measure the effect of placement of allografts on femoral strains, to determine their load-sharing capacity.

Cross-Sectional Areas and Volumes Occupied by Implants in Simulated Scaphoid Fractures.

Purpose: This study determined the volume of bone replaced by an implant at the proximal and distal poles of simulated scaphoid fractures. We also measured the cross-sectional area of the implant relative to the cross-sectional area of the scaphoid at 2 different simulated fracture locations.

Methods: Microcomputed tomograhy scans of 7 cadaveric scaphoids were used to create 3-dimensional models in which transverse proximal pole and midwaist fractures were simulated.

Delays in Obtaining Knee MRI in Pediatric Sports Medicine: Impact of Insurance Type.

Background: Increased enrollment in government-based insurance plans has been reported. With youth sports injuries on the rise, increased ordering of advanced imaging such as magnetic resonance imaging (MRI) has occurred. This study sought to report on the impact of insurance type on access to and results of knee MRI in pediatric sports medicine patients.

Origins of material loss in highly worn acetabular cups of metal-on-metal total hip replacements.

Excessive wear has been one of the major failure modes of metal-on-metal hip implants. From a collection of 541 retrieved ASR metal-on-metal implants, we selected those head-cup pairs with combined wear >100 mm , (N = 42) to assess the distributions of wear volume on cups, and non-conformance in the worn areas at the head-cup interfaces. All 42 had severe cup edge wear (average maximum wear depth 500 μm).

Five Hundred Fifty-five Retrieved Metal-on-metal Hip Replacements of a Single Design Show a Wide Range of Wear, Surface Features, and Histopathologic Reactions.

Background: In 2010, a widely used metal-on-metal hip implant design was voluntarily recalled by the manufacturer because of higher than anticipated failure rates at 5 years. Although there was a large published range of revision rates, numerous studies had reported a higher risk of revision for excessive wear and associated adverse tissue reactions when compared with other metal-on-metal total hips. The reasons for this were suggested by some to be related to cup design features.

Lessons learnt from early failure of a patient trial with a polymer-on-polymer resurfacing hip arthroplasty.

Background and purpose - Hip resurfacing (HR) is a treatment option promoted for hip arthritis in young and active patients. However, adverse reactions to metal are a concern and the search for non-metallic bearing options proceeds. We present the first clinical study performed in patients using a newly developed hydrophilic polymer-on-polymer hip resurfacing device.

Long-Term Outcomes of Liner Cementation into a Stable Retained Shell: A Concise Follow-up of a Previous Report.

Unlabelled: Liner cementation into a preexisting stable socket may reduce the morbidity of revision hip arthroplasty and preserve acetabular bone. However, the long-term outcomes of this technique remain unknown. The purpose of this report was to analyze the long-term results of a previously reported cohort of patients.