Load-bearing behavior of a simulated craniofacial structure fabricated from a hydroxyapatite cement and bioresorbable fiber-mesh.

Calcium phosphate cements (CPC) have proven successful in the repair of small, non-stress bearing skeletal defects. These cements do not have sufficient tensile strength or fracture toughness to allow their use in stress-bearing applications. It was hypothesized that a bioresorbable fiber mesh would improve the load-bearing behavior of shell structures fabricated of CPC.

Practical application of polyurethane and Velcro in maxillofacial prosthetics.

A procedure is described for the fabrication of an extraoral prosthesis with an acrylic resin substructure that retains a magnet sealed from the environment by a polyurethane liner. Velcro is used to enhance the bond of the acrylic substructure to the silicone prosthesis. This procedure results in improved retention of the acrylic resin substructure and protection of the magnet with an encapsulating polyurethane liner.

Endodontic considerations of the nasopalatine duct region.

Although rare, anomalies of the nasopalatine region have been reported in the literature mimicking pathoses of endodontic origin. The purpose of this article is to present a case of a patent nasopalatine duct that was originally diagnosed as a sinus tract and referred for endodontic therapy. A review of the anatomy of the nasopalatine region is also discussed.

Comparison of nickel-titanium and stainless-steel spreader penetration and accessory cone fit in curved canals.

The purpose of this study was to compare nickel-titanium and stainless-steel spreader penetration in curved canals. Twenty prepared plastic blocks with a 30 degrees curvature were used for each part of the study. In part 1, the force required to insert each spreader to within 1 mm of working length in an empty canal was measured.

Comparison of the cleaning efficacy of passive sonic activation and passive ultrasonic activation after hand instrumentation in molar root canals.

The purpose of this study was to compare the cleaning efficacy of passive ultrasonic activation with that of passive sonic activation after hand instrumentation. Sixty curved molar canals were hand-instrumented to size 35 and divided into three groups. Group 1 received no further treatment.

Endodontic working length determination--where does it end?

Obtaining a correct working length is critical to the success of endodontic therapy. Failure to identify this crucial measurement can result in untoward treatment outcomes, which may include increased patient discomfort, possible infection or cyst development, and extrusion or intra-canal medication into the periradicular tissue. This article reviews the classical and current terminology, philosophies, and techniques that are used at present to determine endodontic working length accurately, and describes their clinical application.

Periodontal plastic surgery in a dystrophic epidermolysis bullosa patient: review and case report.

Epidermolysis bullosa (EB) is a group of genetic disorders in which patients frequently present with fragile skin and mucosal surfaces that blister following minor trauma; 23 subtypes have been recognized, but their precise pathogenesis and etiology remain obscure. There is no treatment for EB, only palliative therapy. Oral bullae are the most common oral finding and affect all surfaces.

Centric relation registration using an anterior deprogrammer in dentate patients.

A technique is described for registering centric relation in dentate patients using an anterior deprogrammer to prevent muscle splinting. Properly executed, the patient is able to close into centric relation unassisted, eliminating the possibility of operator-induced error associated with commonly accepted manipulative techniques. Verification is possible visually when articulating casts by confirming the precise alignment of the mandibular incisors with occlusal markings on the deprogrammer attached to the maxillary cast.

Clinically relevant approach to failure testing of all-ceramic restorations.

Statement Of Problem: One common test of single-unit restorations involves applying loads to clinically realistic specimens through spherical indenters, or equivalently, loading curved incisal edges against flat compression platens. As knowledge has become available regarding clinical failure mechanisms and the behavior of in vitro tests, it is possible to constructively question the clinical validity of such failure testing and to move toward developing more relevant test methods.

Purpose: This article reviewed characteristics of the traditional load-to-failure test, contrasted these with characteristics of clinical failure for all-ceramic restorations, and sought to explain the discrepancies.

Wound healing and repair: a review of the art and science.

This chronological review of the major biological events that occur secondary to injury of mucoperiosteal tissue from either simple surgical wounding or trauma discusses the materials used to repair the compromised tissue surgically. Suturing techniques and post-surgical wound maintenance also are reviewed. The physiological stages of wound healing, factors affecting wound healing, and wound repair techniques are discussed.

Cytokine production by cryopreserved human peripheral blood mononuclear cells in response to periodontal pathogens.

Freezing techniques provide a way of repeating and extending immunological assays by using frozen portions of an individual's peripheral blood mononuclear cell fraction. Earlier work shows that the lymphocytes that are stored frozen retain their ability to respond to polyclonal B-cell activators, mitogens, superantigens and bacterial extracts of oral interest. These studies extend previous findings by determining cytokine production by lymphocytes following frozen storage for up to 24 weeks.

Psychological and physiological parameters of masticatory muscle pain.

The objective of this research was to identify the psychological and physiological variables that differentiate persons reporting masticatory muscle pain (MMP) from normal controls (NC). This study examined the characteristics of 35 MMP patients in comparison to 35 age-, sex-, and weight-matched NCs. All subjects completed a series of standardized questionnaires prior to undergoing a laboratory evaluation consisting of a psychosocial stressor and pressure pain stimulation at multiple body sites.

Acid-Assisted Consolidation of Silver Alloys for Direct Fillings.

Silver-rich metal powders cold-welded by consolidation have been investigated as possible direct dental filling material. The surface of the silver powder must undergo an acid treatment to remove existing contaminants and prevent formation of new surface contaminants during consolidation. This study was designed to investigate the effect of the acid treatment on the strength of the consolidated alloy, its reactivity with the surrounding tooth structure, and its reactions with certain cavity liners.

The endodontic-periodontal continuum revisited: new insights into etiology, diagnosis and treatment.

For many decades, investigators have conducted studies of the interrelationship between endodontics and periodontics. This review article examines previously held concepts regarding the endodontic-periodontal continuum in light of new research and explores promising advances in understanding etiology and in diagnosis and treatment.

The effect of dentin disinfectants on shear bond strength of resin-modified glass-ionomer materials.

The purpose of this study was to investigate the effect of dentinal disinfection with a 2% chlorhexidine or a 0.11% I2-KI/CuSO4 solution on the shear bond strength of three resin-modified glass-ionomer cements: Fuji II LC, Photac-Fil, and Vitremer. The occlusal surfaces of extracted human teeth were flattened to dentin.

Comparison of bioabsorbable laminar bone membrane and non-resorbable ePTFE membrane in mandibular furcations.

The purpose of the study was to compare clinical parameter changes and osseous regeneration in 12 pairs of comparable Class II mandibular molar furcation invasion defects using either a bioabsorbable demineralized laminar bone allograft membrane or a non-resorbable expanded polytetrafluoroethylene (ePTFE) membrane as a barrier in guided tissue regeneration. Measurements with calibrated periodontal probes were made to determine soft tissue recession, probing depth, and attachment levels. Defects within each pair were randomly selected for treatment with either bioabsorbable demineralized bone allograft membrane or ePTFE membrane.

Comparison of triazolam, diazepam, and placebo as outpatient oral premedication for endodontic patients.

Triazolam and diazepam were compared as oral antianxiety agents in a randomized double-blind, placebo-controlled clinical study of 79 endodontic patients with elevated anxiety regarding endodontic treatment. Patients who scored > or = 10 on the Corah Dental Anxiety Survey received oral formulations of triazolam (0.25 mg), diazepam (5 mg), or placebo.

Surface treatment effects on amalgam repair strength.

Purpose: To determine whether the use of microetching and bonding agents could improve the shear bond strength between aged and freshly added dental amalgam, simulating an amalgam repair.

Materials And Methods: Aged amalgam surfaces were treated with either a carbide bur or carbide bur + microetcher (Al2O3 abrasive). Five commercially-available adhesive systems were tested.

Necotizing gingivostomatitis: NUG to noma.

Necrotizing gingivostomatitis (NG) is an increasingly rare but potentially serious infection that can present as a spectrum of clinical disease ranging from necrotizing ulcerative gingivitis to noma. The diagnostic triad for NG is pain, interdental ulceration, and gingival bleeding, but many cases also display fetid breath and pseudomembrane formation. Etiology is believed to be an opportunistic bacterial infection occurring in individuals debilitated by malnutrition, human immunodeficiency virus infection, or other systemic factors, including inadequate sleep, unusual stress, recent illness, alcohol use, and smoking.

Surface roughness of glass-ceramic insert-composite restorations: assessing several polishing techniques.

The authors compared the effectiveness of seven polishing methods on glass-ceramic insert-composite restorations placed in plastic resin squares. The polishing methods used carbide dental finishing burs and diamond polishing paste, diamond abrasive finishing burs and diamond polishing paste, diamond abrasive finishing burs and composite resin finishing disks, diamond abrasive finishing burs and composite resin polishing points, diamond abrasive finishing burs only, diamond abrasive finishing burs followed by resin impregnated disks and an aluminum oxide polishing abrasive paste, and diamond abrasive finishing burs followed by diamond polishing paste. All systems achieved comparable smoothness except the carbide finishing burs, which damaged the insert-composite margin.

Clinical evaluation of bacterial leakage of endodontic temporary filling materials.

This study was an in vivo comparison of the bacterial leakage associated with three endodontic temporary restorative materials: Cavit, Intermediate Restorative Material (IRM), and TERM. The access openings of 51 endodontically treated teeth were randomly sealed with a 4-mm thickness of one of the three materials. Three wk after placement of each temporary restoration, bacterial leakage was evaluated by sampling from beneath the temporary restoration and then culturing the samples both aerobically and anaerobically.

Immunomodulatory and superantigen activities of bacteria associated with adult periodontitis.

Immune dysfunctions are frequently associated with chronic inflammatory diseases. Several investigators have reported that patients with severe periodontitis show reduced or negligible levels of proliferative responses of peripheral blood and gingival lymphocytes to periodontopathic organisms. The purpose of this study was to evaluate the influences of products from Porphyromonas gingivalis (P.

Oral electricity.

"Oral electricity," "electrogalvanism," or "galvanic currents" has long been recognized as a potential source of oral pain and discomfort. This phenomenon of oral galvanism results from the difference in electrical potential between dissimilar restorative metals located in the mouth. In this case report, the literature is reviewed, and an interesting case study'is presented.

An in vitro evaluation of microleakage of a new root canal sealer.

An in vitro dye leakage study was performed to compare the apical microleakage of Ketac-Endo root canal sealer with that of Roth's 801E and AH26 sealers. Sixty-four single-rooted human teeth were instrumented and randomly divided into four groups. Three groups were obturated with laterally condensed gutta-percha and either Roth's 801E, AH26, or Ketac-Endo as the sealer.