Pearl Millet Cover Crop Extract Inhibits the Development of the Weed by Inducing Oxidative Stress in Primary Roots and Affecting Photosynthesis Efficiency.

The cover crop (L.) R.Br.

Deposition Characteristics of Air-Assisted Sprayer Based on Canopy Volume and Leaf Area of Orchard Trees.

Precision pesticide application mainly relies on canopy volume, resulting in varied application effectiveness across different density areas of orchard trees. This study examined pesticide application effectiveness based on the spray wind, canopy volume, and leaf area within the canopy, providing variable bases for precise regulation of spray wind and pesticide dosage. The study addresses the knowledge gap by utilizing laser detection and ranging (LiDAR) to measure the thickness and leaf area of orchard tree canopies.

The Construction of a Standard Karyotype of Intermediate Wheatgrass and Its Potential Progenitor Species.

The genome composition of intermediate wheatgrass (IWG; (Host) Barkworth and D.R. Dewey; 2n = 6x = 42) is complex and remains to be a subject of ongoing investigation.

Patterns and Drivers of Surface Energy Flux in the Alpine Meadow Ecosystem in the Qilian Mountains, Northwest China.

Alpine meadows are vital ecosystems on the Qinghai-Tibet Plateau, significantly contributing to water conservation and climate regulation. This study examines the energy flux patterns and their driving factors in the alpine meadows of the Qilian Mountains, focusing on how the meteorological variables of net radiation (), air temperature, vapor pressure deficit (), wind speed (), and soil water content () influence sensible heat flux () and latent heat flux (). Using the Bowen ratio energy balance method, we monitored energy changes during the growing and non-growing seasons from 2022 to 2023.

Maternal Vitamin D Deficiency Is a Risk Factor for Infants' Epigenetic Gestational Age Acceleration at Birth in Japan: A Cohort Study.

Background/objectives: The DNA methylation of neonatal cord blood can be used to accurately estimate gestational age. This is known as epigenetic gestational age. The greater the difference between epigenetic and chronological gestational age, the greater the association with an inappropriate perinatal fetal environment and development.

Genetic Variants and Lifestyle Factors in Androgenetic Alopecia Patients: A Case-Control Study of Single Nucleotide Polymorphisms and Their Contribution to Baldness Risk.

Unlabelled: Single nucleotide polymorphisms (SNPs) found to be associated with Androgenetic Alopecia (AGA) to date, are characterized by an apparent reduced penetrance into the phenotype suggesting a role of other factors in the etiology of AGA.

Objective: We conducted a study to investigate the role of specific allelic variants in AGA controlling for nutritional and lifestyle factors.

Methods: Individual patterns of SNPs present in the baldness susceptibility locus at 20p11 (rs1160312 and rs6113491) or close to the androgen receptor (AR) gene in chromosome X (rs1041668) were investigated in 212 male subjects.

Sex Disparity in the Nutrition-Related Determinants of Mild Cognitive Impairment: A Case-Control Study.

Background/objectives: Sex differences in nutrition-related determinants of mild cognitive impairment (MCI) exist among the elderly. This study aimed to explore sex-specific influencing factors of MCI.

Methods: A case-control study was conducted in 2020 involving 1086 elderly people aged 55 years and above from four sites in Zhejiang Province, China.

Effects of Additional Flexible and Rigid Structure on BDT-BDD Terpolymer and the Performance of Organic Solar Cells.

In organic solar cells, the aggregation and crystallization of polymers are significant for bulk heterojunction. Blending with acceptor materials, polymer donor materials can adjust their aggregation by the movement of the chain segments. In this paper, the unfused structures based on thiophene and carbazole are respectively designed and introduced into the donor-acceptor copolymer donor materials to investigate the influence of flexible and rigid structures on polymer-aggregation leading photoelectric performance.

Nanoparticle-Doped Antibacterial and Antifungal Coatings.

Antimicrobial polymeric coatings rely not only on their surface functionalities but also on nanoparticles (NPs). Antimicrobial coatings gain their properties from the addition of NPs into a polymeric matrix. NPs that have been used include metal-based NPs, metal oxide NPs, carbon-based nanomaterials, and organic NPs.

Shape Memory Performance and Microstructural Evolution in PLA/PEG Blends: Role of Plasticizer Content and Molecular Weight.

Poly(lactic acid) (PLA) exhibits excellent shape memory properties but suffers from brittleness and a high glass transition temperature (T), limiting its utility in flexible and durable applications. This study explored the modification of PLA properties through the incorporation of poly(ethylene glycol) (PEG), varying in both content (5-20 wt%) and molecular weight (4000-12,000 g/mol), to enhance its suitability for specific applications, such as medical splints. The PLA/PEG blend, containing 15 wt% PEG and with a molecular weight of 12,000 g/mol, exhibited superior shape fixity (99.

Flexible Vibration Sensors with Omnidirectional Sensing Enabled by Femtosecond Laser-Assisted Fabrication.

Vibration sensors are integral to a multitude of engineering applications, yet the development of low-cost, easily assembled devices remains a formidable challenge. This study presents a highly sensitive flexible vibration sensor, based on the piezoresistive effect, tailored for the detection of high-dynamic-range vibrations and accelerations. The sensor's design incorporates a polylactic acid (PLA) housing with cavities and spherical recesses, a polydimethylsiloxane (PDMS) membrane, and electrodes that are positioned above.

High-Yield Production of Polyhydroxybutyrate and Poly(3-hydroxybutyrate--3-hydroxyhexanoate) from Crude Glycerol by a Newly Isolated Species Oh_219.

Crude glycerol (CG), a major biodiesel production by-product, is the focus of ongoing research to convert it into polyhydroxyalkanoate (PHA). However, few bacterial strains are capable of efficiently achieving this conversion. Here, 10 PHA-producing strains were isolated from various media.

Cell Morphology, Material Property and Ni(II) Adsorption of Microcellular Injection-Molded Polystyrene Reinforced with Graphene Nanoparticles.

Graphene's incorporation into polymers has enabled the development of advanced polymer/graphene nanocomposites with superior properties. This study focuses on the use of a microcellular foamed polystyrene (PS)/graphene (GP) nanocomposite (3 wt%) for nickel (II) ion removal from aqueous solutions. Adsorption behavior was evaluated through FTIR, TEM, SEM, TGA, and XRD analyses.

Optimization Study of a High-Efficiency Preservative for Ammonia-Free Concentrated Natural Rubber Latex.

Ammonia is commonly used as a preservative in the production of concentrated natural rubber latex (CNRL) and latex products; however, it poses a serious risk to human health and the environment. In this study, we investigated a thioacetamide derivative (TD) as a preservative of ammonia-free CNRL and the optimization of a stabilization system comprising potassium hydroxide (KOH), lauric acid (LA), and sodium dodecyl sulfate (SDS) to enhance its preservation effect. The results revealed that an optimal amount of TD (0.

Development of Molecularly Imprinted Photonic Crystals Sensor for High-Sensitivity, Rapid Detection of Sulfamethazine in Food Samples.

As a veterinary drug, sulfamethazine is frequently used to control animal diseases. In this study, a novel molecularly imprinted photonic crystal sensor for the fast visual detection of sulfamethazine in milk and chicken has been developed. Under optimum preparation conditions, a molecularly imprinted, photonic crystal with an anti-opal structure and a clear bright color was prepared and characterized.

Enhanced Dielectric Performance in PVDF-Based Composites by Introducing a Transition Interface.

Polymeric dielectrics have garnered significant interest worldwide due to their excellent comprehensive performance. However, developing polymeric dielectric films with high permittivity () and breakdown strength () and low dielectric loss (tan) presents a huge challenge. In this study, amorphous aluminum oxide (AlO, AO) transition interfaces with nanoscale thickness were constructed between titanium oxide (TiO, TO) nanosheets and polyvinylidene fluoride (PVDF) to manufacture composites (PVDF/TO@AO).

Antistaphylococcal Triazole-Based Molecular Hybrids: Design, Synthesis and Activity.

Background: In the era of resistance, the design and search for new "small" molecules with a narrow spectrum of activity that target a protein or enzyme specific to a certain bacterium with high selectivity and minimal side effects remains an urgent problem of medicinal chemistry. In this regard, we developed and successfully implemented a strategy for the search for new hybrid molecules, namely, the not broadly known [2-(3-R-1-[1,2,4]-triazol-5-yl)phenyl]amines. They can act as "building blocks" and allow for the introduction of certain structural motifs into the desired final products in order to enhance the antistaphylococcal effect.

Evaluation of Prediction Models for the Capping and Breaking Force of Tablets Using Machine Learning Tools in Wet Granulation Commercial-Scale Pharmaceutical Manufacturing.

: This study aimed to establish a predictive model for critical quality attributes (CQAs) related to tablet integrity, including tablet breaking force (TBF), friability, and capping occurrence, using machine learning-based models and nondestructive experimental data. : The machine learning-based models were trained on data to predict the CQAs of metformin HCl (MF)-containing tablets using a commercial-scale wet granulation process, and five models were each compared for regression and classification. We identified eight input variables associated with the process and material parameters that control the tableting outcome using feature importance analysis.

HIV Drug Resistance Profile in Clients Experiencing Treatment Failure After the Transition to a Dolutegravir-Based First-Line Antiretroviral Treatment Regimen in Mozambique.

Real-world data on HIV drug resistance (HIVDR) after transitioning to tenofovir disoproxil fumarate/lamivudine/dolutegravir (TLD) are limited. We assessed HIVDR rates and patterns in clients with virological failure (VF) after switching from an NNRTI-based regimen to TLD. A cross-sectional study was conducted in Gaza, Mozambique (August 2021-February 2022), including adults on first-line ART for ≥12 months who transitioned to TLD and had unsuppressed viral load (VL) ≥ 1000 copies/mL six months post-transition.

The Evaluation of Antibacterial Coatings Against Commonly Found Pathogenic Bacteria in the Environment-Implications for Environmental Safety and Infection Prevention.

Microorganisms, including pathogens that cause skin, respiratory, and urinary tract infections, are widespread in our environment. Despite routine cleaning with bleach and disinfectants, the transmission of pathogens still occurs, leading to potential infectious diseases. This study aimed to determine the antibacterial effect of two coating formulas against common environmental pathogens like , , , , sp.

Time Series Data Augmentation for Energy Consumption Data Based on Improved TimeGAN.

Predicting the time series energy consumption data of manufacturing processes can optimize energy management efficiency and reduce maintenance costs for enterprises. Using deep learning algorithms to establish prediction models for sensor data is an effective approach; however, the performance of these models is significantly influenced by the quantity and quality of the training data. In real production environments, the amount of time series data that can be collected during the manufacturing process is limited, which can lead to a decline in model performance.

Dynamic Interferometry for Freeform Surface Measurement Based on Machine Learning-Configured Deformable Mirror.

Optical freeform surfaces are widely used in imaging and non-imaging systems due to their high design freedom. In freeform surface manufacturing and assembly, dynamic freeform surface measurement that can guide the next operation remains a challenge. To meet this urgent need, we propose a dynamic interferometric method based on a machine learning-configured deformable mirror (DM).

Automated Volumetric Milling Area Planning for Acoustic Neuroma Surgery via Evolutionary Multi-Objective Optimization.

Mastoidectomy is critical in acoustic neuroma surgery, where precise planning of the bone milling area is essential for surgical navigation. The complexity of representing the irregular volumetric area and the presence of high-risk structures (e.g.

A New Self-Made 16-Channel Capacitive Electrocardiography System: An Investigation and Validation for Non-Contact Electrodes.

Generally, the electrocardiography (ECG) system plays an important role in preventing and diagnosing heart diseases. To further improve the amenity and convenience of using an ECG system, we built a customized capacitive electrocardiography (cECG) system with one wet electrode, sixteen non-contact electrodes, two ADS1299 chips, and one STM32F303-based microcontroller unit (MCU). This new cECG system could acquire, save, and display the ECG data in real time.

Benzo[1,2-b:6,5-b']dithiophene-4,5-diamine: A New Fluorescent Probe for the High-Sensitivity and Real-Time Visual Monitoring of Phosgene.

The detection of highly toxic chemicals such as phosgene is crucial for addressing the severe threats to human health and public safety posed by terrorist attacks and industrial mishaps. However, timely and precise monitoring of phosgene at a low cost remains a significant challenge. This work is the first to report a novel fluorescent system based on the Intramolecular Charge Transfer (ICT) effect, which can rapidly detect phosgene in both solution and gas phases with high sensitivity by integrating a benzo[1,2-b:6,5-b']dithiophene-4,5-diamine (BDTA) probe.