Thermo-responsive 3D nanostructures for enhanced performance in food-poisoning bacterial analysis.

The growing risk of bacterial food poisoning due to global warming has necessitated the development of methods for accurate detection of food-poisoning bacteria. Despite extensive efforts to develop enhanced bacterial-capture methods, challenges associated with the release of the captured bacteria have limited the sensitivity of bacterial detection. In this study, thermo-responsive intelligent 3D nanostructures to improve food-poisoning bacterial analysis performance were fabricated by introducing a thermo-responsive polymer onto an urchin-like 3D nanopillar substrate (URCHANO).

Long-Lasting, Transparent Antibacterial Shield: A Durable, Broad-Spectrum Anti-Bacterial, Non-Cytotoxic, Transparent Nanocoating for Extended Wear Contact Lenses.

The increasing incidence of serious bacterial keratitis, a sight-threatening condition often exacerbated by inadequate contact lens (CLs) care, highlights the need for innovative protective technology. This study introduces a long-lasting antibacterial, non-cytotoxic, transparent nanocoating for CLs via a solvent-free polymer deposition method, aiming to prevent bacterial keratitis. The nanocoating comprises stacked polymer films, with poly(dimethylaminomethyl styrene-co-ethylene glycol dimethacrylate) (pDE) as a biocompatible, antibacterial layer atop poly(2,4,6,8-tetramethyl-2,4,6,8-tetravinylcyclotetrasiloxane) (pV4D4) as an adhesion-promoting layer.

Longevous Protic Hybrid Supercapacitors Using Bimetallic Prussian Blue Analogue/rGO-Based Nanocomposite Against MXene Anode.

MXenes exhibit a unique combination of properties-2D structure, high conductivity, exceptional capacity, and chemical resistance-making them promising candidates for hybrid supercapacitors (HSCs). However, the development of MXene-based HSCs is often hindered by the limited availability of cathode materials that deliver comparable electrochemical performance, especially in protic electrolytes. In this study, this challenge is addressed by introducing a durable protic HSC utilizing a bimetallic Prussian Blue Analogue (PBA) decorated on reduced graphene oxide (rGO) as a nanocomposite cathode paired with a single-layered TiCT MXene (SL-MXene) anode.

Surface Functionalization of 3D-Printed Scaffolds with Seed-Assisted Hydrothermally Grown ZnO Nanoarrays for Bone Tissue Engineering.

Bioactive metal-based nanostructures, particularly zinc oxide (ZnO), are promising materials for bone tissue engineering. However, integrating them into 3D-printed polymers using traditional blending methods reduces the cell performance. Alternative surface deposition techniques often require extreme conditions that are unsuitable for polymers.

Exploring role of microbatteries in enhancing sustainability and functionality of implantable biosensors and bioelectronics.

Microbatteries are emerging as a sustainable, miniaturized power source, crucial for implantable biomedical devices. Their significance lies in offering high energy density, longevity, and rechargeability, facilitating uninterrupted health monitoring and treatment within the body. The review delves into the development of microbatteries, emphasizing their miniaturization and biocompatibility, crucial for long-term, safe in-vivo use.

Developing centrifugal force real-time digital PCR for detecting extremely low DNA concentration.

Digital PCR (dPCR) is a technique for absolute quantification of nucleic acid molecules. To develop a dPCR technique that enables more accurate nucleic acid detection and quantification, we established a novel dPCR apparatus known as centrifugal force real-time dPCR (crdPCR). This system is efficient than other systems with only 2.

Effect of Bias Potential on the Interface of a Solid Electrolyte and Electrode during XPS Depth Profiling Analysis.

Depth profiling is an essential method to investigate the physical and chemical properties of a solid electrolyte and electrolyte/electrode interface. In conventional depth profiling, various spectroscopic tools such as X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectroscopy (SIMS) are utilized to monitor the chemical states along with ion bombardment to etch a sample. Nevertheless, the ion bombardment during depth profiling results in an inevitable systematic error, i.

On-site detection of methicillin-resistant Staphylococcus aureus (MRSA) utilizing G-quadruplex based isothermal exponential amplification reaction (GQ-EXPAR).

Methicillin-resistant Staphylococcus aureus (MRSA) has a high incidence in infectious hospitals and communities, highlighting the need for early on-site detection due to its resistance to methicillin antibiotics. The present study introduces a highly sensitive detection system for mecA, a crucial methicillin marker, utilizing an RCA-based isothermal exponential amplification reaction. The G-quadruplex-based isothermal exponential amplification reaction (GQ-EXPAR) method designs probes to establish G-quadruplex secondary structures incorporating thioflavin T for fluorescence.

Multiplex Detection of Foodborne Pathogens using 3D Nanostructure Swab and Deep Learning-Based Classification of Raman Spectra.

Proactive management of foodborne illness requires routine surveillance of foodborne pathogens, which requires developing simple, rapid, and sensitive detection methods. Here, a strategy is presented that enables the detection of multiple foodborne bacteria using a 3D nanostructure swab and deep learning-based Raman signal classification. The nanostructure swab efficiently captures foodborne pathogens, and the portable Raman instrument directly collects the Raman signals of captured bacteria.

Toward Advanced Superomniphobicity: Hierarchical Insights from Serif-T Nanostructures to Microscale Wrinkles.

Developing a superomniphobic surface that exceeds the static and dynamic repellency observed in nature's springtails for various liquids presents a significant challenge in the realm of surface and interface science. However, progress in this field has been particularly limited when dealing with low-surface-tension liquids. This is because dynamic repellency values are typically at least 2 orders of magnitude lower than those observed with water droplets.

Gate Capacitance Coupling of Double-Gate Carbon Nanotube Network Transistors.

Carbon nanotube (CNT) network channels constructed using a high-purity CNT solution for use in CNT thin-film transistors have the advantages of the possibility of requiring a low-temperature process and needing no special equipment. However, there are empty spaces between individual CNTs, resulting in unexpected effects. In this study, double-gate (DG) CNT network transistors were fabricated and measured in four different configurations to observe the capacitive coupling effects between the top gate (TG) and bottom gate (BG) in the DG structure.

ANCA: artificial nucleic acid circuit with argonaute protein for one-step isothermal detection of antibiotic-resistant bacteria.

Endonucleases have recently widely used in molecular diagnostics. Here, we report a strategy to exploit the properties of Argonaute (Ago) proteins for molecular diagnostics by introducing an artificial nucleic acid circuit with Ago protein (ANCA) method. The ANCA is designed to perform a continuous autocatalytic reaction through cross-catalytic cleavage of the Ago protein, enabling one-step, amplification-free, and isothermal DNA detection.

Deep neural network-based phase calibration in integrated optical phased arrays.

Calibrating the phase in integrated optical phased arrays (OPAs) is a crucial procedure for addressing phase errors and achieving the desired beamforming results. In this paper, we introduce a novel phase calibration methodology based on a deep neural network (DNN) architecture to enhance beamforming in integrated OPAs. Our methodology focuses on precise phase control, individually tailored to each of the 64 OPA channels, incorporating electro-optic phase shifters.

A portable smartphone-based colorimetric sensor that utilizes dual amplification for the on-site detection of airborne bacteria.

Over the past few years, infections caused by airborne pathogens have spread worldwide, infecting several people and becoming an increasingly severe threat to public health. Therefore, there is an urgent need for developing airborne pathogen monitoring technology for use in confined environments to enable epidemic prevention. In this study, we designed a colorimetry-based bacterial detection platform that uses a clustered regularly interspaced short palindromic repeat-associated protein 12a system to amplify signals and a urease enzyme to induce color changes.

Charge-shifting polyplex as a viral RNA extraction carrier for streamlined detection of infectious viruses.

The recent outbreak of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has highlighted the need for rapid, user-friendly nucleic acid testing that involves simple but efficient RNA extraction. Here, we present a charge-shifting polyplex as an RNA extraction carrier for advanced diagnosis of infectious viral diseases. The polyplex comprises poly(2-(dimethylamino) ethyl acrylate) (pDMAEA) electrostatically conjugated with RNA.

Linear conductance update improvement of CMOS-compatible second-order memristors for fast and energy-efficient training of a neural network using a memristor crossbar array.

Memristors are two-terminal memory devices that can change the conductance state and store analog values. Thanks to their simple structure, suitability for high-density integration, and non-volatile characteristics, memristors have been intensively studied as synapses in artificial neural network systems. Memristive synapses in neural networks have theoretically better energy efficiency compared with conventional von Neumann computing processors.

Wafer-scale striped network transistors based on purified semiconducting carbon nanotubes for commercialization.

Highly purified and solution-processed semiconducting carbon nanotubes (s-CNTs) have developed rapidly over the past several decades and are near-commercially available materials that can replace silicon due to its large-area substrate deposition and room-temperature processing compatibility. However, the more s-CNTs are purified, the better their electrical performance, but considerable effort and long centrifugation time are required, which can limit commercialization due to high manufacturing costs. In this work, we therefore fabricated 'striped' CNT network transistor across industry-standard 8 inch wafers.

Polyaniline-based 3D network structure promotes entrapment and detection of drug-resistant bacteria.

Sensitive and accurate capture, enrichment, and identification of drug-resistant bacteria on human skin are important for early-stage diagnosis and treatment of patients. Herein, we constructed a three-dimensional hierarchically structured polyaniline nanoweb (3D HPN) to capture, enrich, and detect drug-resistant bacteria on-site by rubbing infected skins. These unique hierarchical nanostructures enhance bacteria capture efficiency and help severely deform the surface of the bacteria entrapped on them.

Heterogeneously integrated light emitting diodes and photodetectors in the metal-insulator-metal waveguide platform.

We demonstrate heterogeneous integration of active semiconductor materials into the conventional passive metal-insulator-metal (MIM) waveguides to provide compact on-chip light generation and detection capabilities for chip-scale active nanophotonic platforms. Depending on its bias conditions, a metal-semiconductor-metal section can function as either a light emitting diode or a photodetector directly connected to the MIM waveguides. We experimentally verify the independent and combined operations of electrically-driven on-chip light sources and photodetectors.

Ultrafast Plasmonic Nucleic Acid Amplification and Real-Time Quantification for Decentralized Molecular Diagnostics.

Point-of-care real-time reverse-transcription polymerase chain reaction (RT-PCR) facilitates the widespread use of rapid, accurate, and cost-effective near-patient testing that is available to the public. Here, we report ultrafast plasmonic nucleic acid amplification and real-time quantification for decentralized molecular diagnostics. The plasmonic real-time RT-PCR system features an ultrafast plasmonic thermocycler (PTC), a disposable plastic-on-metal (PoM) cartridge, and an ultrathin microlens array fluorescence (MAF) microscope.

Sub-10 fJ/bit radiation-hard nanoelectromechanical non-volatile memory.

With the exponential growth of the semiconductor industry, radiation-hardness has become an indispensable property of memory devices. However, implementation of radiation-hardened semiconductor memory devices inevitably requires various radiation-hardening technologies from the layout level to the system level, and such technologies incur a significant energy overhead. Thus, there is a growing demand for emerging memory devices that are energy-efficient and intrinsically radiation-hard.

Elution-free DNA detection using CRISPR/Cas9-mediated light-up aptamer transcription: Toward all-in-one DNA purification and detection tube.

Accurate and efficient detection of DNA is crucial for disease diagnosis and health monitoring. The traditional methods for DNA analysis involve multiple steps, including sample preparation, lysis, extraction, amplification, and detection. In this study, we present a one-step elution-free DNA analysis method based on the combination of clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9)-mediated light-up aptamer transcription (CLAT) assay and a DNA-capturing poly(2-dimethylaminomethyl styrene) (pDMAMS)-coated tube.

The Integration of Reference Electrode for ISFET Ion Sensors Using Fluorothiophenol-Treated rGO.

Ion-sensitive field-effect transistors (ISFETs) detect specific ions in solutions that enable straightforward, fast, and inexpensive sensors compared to other benchtop equipment. However, a conventional reference electrode (RE) such as Ag/AgCl is limited on the miniaturization of the sensor. We introduce reduced graphene oxide (rGO), which serves as a new RE, when fluorinated (F-rGO) using fluorothiophenol through the π-π interaction.

Review: 3-Aminopropyltriethoxysilane (APTES) Deposition Methods on Oxide Surfaces in Solution and Vapor Phases for Biosensing Applications.

Surface functionalization and bioreceptor immobilization are critical processes in developing a highly sensitive and selective biosensor. The silanization process with 3-aminopropyltriethoxysilane (APTES) on oxide surfaces is frequently used for surface functionalization because of beneficial characteristics such as its bifunctional nature and low cost. Optimizing the deposition process of the APTES layer to obtain a monolayer is crucial to having a stable surface and effectively immobilizing the bioreceptors, which leads to the improved repeatability and sensitivity of the biosensor.