Contactless electric igniter for vehicle to lower exhaust emission and fuel consumption.

An electric igniter for engine/hybrid vehicles is presented. The igniter comprises a flyback converter, a voltage-stacked capacitor, a PIC-based controller, a differential voltage detector, and an ignition coil, of which structure is non-contact type. Since the electric igniter adopts a capacitor to accumulate energy for engine ignition instead of traditional contacttype approach, it enhances the igniting performance of a spark plug effectively.

Photocatalytic splitting of seawater effected by (Ni-ZnO)@C nanoreactors.

Novel photocatalysts i.e., metallic nickel and zinc oxide nanoparticles embedded in the carbon-shell ((Ni-ZnO)@C) have been used for photocatalytic splitting of seawater to generate H2.

MicroRNA expression profiles in human breast cancer cells after multifraction and single-dose radiation treatment.

MicroRNAs (miRNAs) are small non-coding RNAs that contribute to modulating signaling pathways after radiation exposure and have emerged as a potential therapeutic target or biomarker in the radiation response of cancer. Exposing breast cancer cells to single-dose (SD) or multifractionated (MF) radiation may affect the cells differently. However, the roles of miRNAs in breast cancer cells after the response to SD or MF is not thoroughly understood.

Effect of silica fouling on the removal of pharmaceuticals and personal care products by nanofiltration and reverse osmosis membranes.

In this study, one reverse osmosis (XLE) and two nanofiltration (NF90 and NF270) membranes were fouled by silica to evaluate its effect on the flux decline as well as the removal of six pharmaceuticals and personal care products (PPCPs) including carbamazapine (CBZ), triclosan (TRI), ibuprofen (IBU), sulfadiazine (DIA), sulfamethoxazole (SMX) and sulfamethazine (SMZ) from pH 3 to 10. The membranes were characterized by physicochemical properties including hydrophobicity, surface morphology and PPCPs adsorption with or without the presence of silica fouling to validate the rejection mechanisms of PPCPs. The fouling mechanisms were investigated using the modified Hermia model.

Comprehensive microRNA profiling of prostate cancer cells after ionizing radiation treatment.

MicroRNAs (miRNAs) are small, non-coding RNAs that negatively regulate gene expression and have emerged as potential biomarkers in radiation response to human cancer. Only a few miRNAs have been identified in radiation response to prostate cancer and the involvement of the radiation-associated miRNA machinery in the response of prostate cancer cells to radiation is not thoroughly understood. Therefore, the purpose of the present study was to comprehensively investigate the expression levels, arm selection preference and isomiRs of radiation-response miRNAs in radiation-treated PC3 cells using a next-generation sequencing (NGS) approach.

The influences of computer system success and informatics competencies on organizational impact in nursing environments.

The previous literature provides evidence that the characteristics of a successful computer system and the informatics competencies of individuals play a critical role in the adoption of information technology. However, while the combined effects of the two may provide a comprehensive view in understanding nursing informatics research, they have rarely been studied simultaneously. Therefore, this study aimed to examine the influences of computer system success and informatics competencies on nursing organizational impact.

Urinary metabolites of di(2-ethylhexyl) phthalate relation to sperm motility, reactive oxygen species generation, and apoptosis in polyvinyl chloride workers.

Purpose: To measure the concentrations of urinary di(2-ethylhexyl) phthalate (DEHP) metabolites in polyvinyl chloride (PVC) workers and a control group for determining the relationship of DEHP exposure to semen quality, sperm reactive oxygen species (ROS) generation, and sperm apoptosis.

Methods: We assessed the metabolites of DEHP, namely urinary mono-(2-ethylhexyl) phthalate (MEHP), mono-(2-ethyl-5-hydroxyhexyl) phthalate (MEHHP), and mono-(2-ethyl-5-oxohexyl) phthalate (MEOHP), and semen quality, such as sperm concentration, motility, morphology, ROS generation, and DNA damage by using terminal deoxynucleotidyl transferase-mediated nick end labeling assay obtained from 47 workers employed within two PVC pellet plants and 15 graduate students in Taiwan.

Results: Sperm concentration and motility were significantly affected in the high-exposure group.

A linearization time-domain CMOS smart temperature sensor using a curvature compensation oscillator.

This paper presents an area-efficient time-domain CMOS smart temperature sensor using a curvature compensation oscillator for linearity enhancement with a -40 to 120 °C temperature range operability. The inverter-based smart temperature sensors can substantially reduce the cost and circuit complexity of integrated temperature sensors. However, a large curvature exists on the temperature-to-time transfer curve of the inverter-based delay line and results in poor linearity of the sensor output.

Effect of Annealing Temperature on the Water Contact Angle of PVD Hard Coatings.

Various PVD (physical vapor deposition) hard coatings including nitrides and metal-doped diamond-like carbons (Me-DLC) were applied in plastic injection and die-casting molds to improve wear resistance and reduce sticking. In this study, nitrides hcp-AlN (hexagonal close-packed AlN), Cr₂N, (CrAl)₂N) and Me-DLC (Si-DLC and Cr-DLC) coatings were prepared using a closed field unbalanced magnetron reactive sputtering system. The coatings were annealed in air for 2 h at various temperatures, after which the anti-sticking properties were assessed using water contact angle (WCA) measurements.

Modular design of the LED vehicle projector headlamp system.

A well designed headlamp for a vehicle lighting system is very important as it provides drivers with safe and comfortable driving conditions at night or in dark places. With the advances of the semiconductor technology, the LED has become the fourth generation lighting source in the auto industry. In this study, we will propose a LED vehicle projector headlamp system.

Thermophilic bioleaching of heavy metals from waste sludge using response surface methodology.

The bioleaching process is considered to be more efficient and environmentally friendly than conventional technologies for removal of heavy metals from waste sludge. The objective of this study was to develop an optimal thermophilic bioleaching process for the treatment of waste sludge containing high concentrations of heavy metals. In this study, two operating parameters, sludge solid content and sulfur (substrate) concentration, were studied based on a central composite design (CCD) for their metal solubilization and solid degradation performances.

A time-domain CMOS oscillator-based thermostat with digital set-point programming.

This paper presents a time-domain CMOS oscillator-based thermostat with digital set-point programming [without a digital-to-analog converter (DAC) or external resistor] to achieve on-chip thermal management of modern VLSI systems. A time-domain delay-line-based thermostat with multiplexers (MUXs) was used to substantially reduce the power consumption and chip size, and can benefit from the performance enhancement due to the scaling down of fabrication processes. For further cost reduction and accuracy enhancement, this paper proposes a thermostat using two oscillators that are suitable for time-domain curvature compensation instead of longer linear delay lines.

Microwave-induced nanoscale zero-valent iron degradation of perchloroethylene and pentachlorophenol.

Unlabelled: Microwave (MW) is applied to enhance perchloroethylene (PCE) or pentachlorophenol (PCP) removal using zero-valent iron (ZVI; Fe(0)) as the dielectric medium. ZVI has a much higher dielectric loss factor (39.5) than other media; it is capable of absorbing MW radiation rapidly to speed up the release of electrons, leading to rises of the ZVI particle surface temperature.

Constructing "behavioral" comparison groups: A difference-in-difference analysis of the effect of copayment based on the patient's price elasticity.

It is well known that the differences-in-differences (DD) estimator is based on the assumption that in the absence of treatment, the average outcomes for the treated group and the control group will follow a common trend over time. That can be problematic, especially when the selection for the treatment is influenced by the individual's unobserved behavior correlating with the medical utilization. The aim of this study was to develop an index for controlling a patient's unobserved heterogeneous response to reform, in order to improve the comparability of treatment assignment.

Surface plasmon-enhanced lasing in dye-doped cholesteric liquid crystals.

This study shows the results of a photonic band-edge laser using dye-doped cholesteric liquid crystals (CLCs) combined with silver (Ag) nanoparticles. When the Ag nanoparticle surface plasmon resonance wavelength matched the excitation source wavelength, the large optical fields provided by surface plasmons increased the fluorescence of dye molecules by enhancing the molecular excitation rate, achieving a low lasing threshold and high pumping efficiency.

Implementation of a portable electronic system for providing pain relief to patellofemoral pain syndrome patients.

In this study, a portable electromyogram (EMG) system and a stimulator are developed for patellofemoral pain syndrome patients, with the objective of reducing the pain experienced by these patients; the patellar pain is caused by an imbalance between the vastus medialis obliquus (VMO) and the vastus lateralis (VL). The EMG measurement circuit and the electrical stimulation device proposed in this study are specifically designed for the VMO and the VL; they are capable of real-time waveform recording, possess analyzing functions, and can upload their measurement data to a computer for storage and analysis. The system can calculate and record the time difference between the EMGs of the VMO and the VL, as well as the signal strengths of both the EMGs.

A study of optical design and optimization of zoom optics with liquid lenses through modified genetic algorithm.

A new concept for the optimization and optical design of miniature digital zoom optics with liquid lens elements is proposed in this research. The liquid lens elements are limited to the discrete configuration in order to obtain the optimal performance for digital zoom. We propose a newly developed digital zoom layout and optimization with a modified genetic algorism (GA) method, in order to meet the demands of a certain specification.

Prevalence of musculoskeletal disorders and job exposure in Taiwan oyster shuckers.

Background: Oyster shucking is characterized by long hours of static work, awkward working posture, and highly repetitive hand/wrist motion. The objectives of this study were to investigate the prevalence of musculoskeletal discomfort and kyphosis in oyster shuckers in Taiwan as well as the biomechanical features of oyster shucking.

Methods: The Chinese version of the Standardized Nordic Musculoskeletal Questionnaire was successfully collected from 234 oyster shuckers.

The association between semen quality in workers and the concentration of di(2-ethylhexyl) phthalate in polyvinyl chloride pellet plant air.

Objective: To investigate potential associations between semen quality in workers and the concentrations of di(2-ethylhexyl) phthalate (DEHP) in personal air collected from polyvinyl chloride (PVC) plants.

Design: Cross-sectional study.

Setting: PVC plants in Taiwan.

Optically controllable and focus-tunable Fresnel lens in azo-dye-doped liquid crystals using a Sagnac interferometer.

This study demonstrates a tunable Fresnel lens in an azo-dye-doped liquid crystal (ADDLC) film using an interference technique. One Fresnel-patterned green beam using a Sagnac interferometer irradiated the UV-illuminated ADDLC cell, yielding a concentric zone plate distribution with homeotropic and isotropic structures in bright and dark regions of the green interference pattern. The proposed Fresnel lens is polarization independent, focus tunable, and the focusing efficiency of the device can be optically controlled.

Design of a hybrid battery charger system fed by a wind-turbine and photovoltaic power generators.

This paper is aimed to develop a digital signal processor (DSP) for controlling a solar cell and wind-turbine hybrid charging system. The DSP consists of solar cells, a wind turbine, a lead acid battery, and a buck-boost converter. The solar cells and wind turbine serve as the system's main power sources and the battery as an energy storage element.

Time-domain analysis of optically controllable biphotonic gratings in azo-dye-doped cholesteric liquid crystals.

This study investigated optically controllable biphotonic gratings (BGs) in azo-dye-doped cholesteric liquid crystals. The BGs were formed under the illumination of one green beam with the simultaneous irradiation of an interference field generated by two coherent red beams. This study ascribes the formation of the BGs to the green-beam-induced dye reorientation and elongation of the helical pitch through trans-cis isomerization and red-beam-induced suppression of dye reorientation and elongation of the helical pitch by cis-trans back isomerization.

How does lead induce male infertility?

An important part of male infertility of unknown etiology may be attributed to various environmental and occupational exposures to toxic substances, such as lead. The reproductive effects of lead are complex and appear to involve multiple pathways, not all of which are fully understood. It is still unclear, for example, if male reproductive issues in lead-exposed persons are mostly related to the disruption of reproductive hormones, whether the problems are due to the lead's direct effects on the gonads, or both? This question has been difficult to answer, because lead, especially at high levels, may adversely affect many human organs.

Adaptive neuro-fuzzy approach for predicting hardness of deposited TiN/ZrN multilayer coatings.

This paper presents an adaptive neuro-fuzzy approach based on first order function of fuzzy model for establishing the relationship between control factors and thin films properties of TiN/ZrN coatings on Si(100) wafer substrates. A statistical model was designed to explore the space of the processes by an orthogonal array scheme. Eight control factors of closed unbalance magnetron sputtering system were selected for modeling the process, such as interlayer material, argon and nitrogen flow rate, titanium and zirconium target current, rotation speed, work distance, and bias voltage.