Enhancing the power quality in radial electrical systems using optimal sizing and selective allocation of distributed generations.

Optimizing energy resources is a major priority these days. Increasing household energy demand often leads to the deterioration of poorly sized distribution networks. This paper presents a method for energy compensation and optimization in radial distribution systems (ORDS).

Localized discrete and asymmetric dark-bright soliton-like modes as nonlinear dynamics in microtubules.

In the present work, we focus on the longitudinal model of microtubules (MTs) proposed by Satarić et al. (1993) [12], and that considers MT cells to have ferroelectric properties (behaviors) due to dipolar oscillations of dimers within MTs, i.e.

Amplification of very low output voltages of PV panels using a Duffing oscillator.

We are interested in the amplification of very low voltages produced by solar cells during sunset or weak sunshine. The study uses a device consisting of a Duffing oscillator, which amplifies and automatically regulates a low-voltage input, an inverter that reverses the negative voltage of one of the outputs of the oscillator, and a summing device to add the voltages of the two oscillator outputs. Experimental and theoretical investigations are conducted, and it is observed from the results that the output voltage can reach to 7.

An estimated photocurrent controlling the inductance current of DC-DC converter for rapid MPPT pursuit with less oscillations under sudden changes in the PV chain.

This paper focuses on simple technique from conventional techniques for the rapid maximum power point (MPP) pursuit with a less oscillations under sudden changes. In investigations, the controllability of the conventional boost converter model shows that the converter can be controlled from the current of its inductance (inductor). To get reference current, a conventional technique known as method of short-circuit current has been transformed to clearly establish with supporting evidence an estimated photocurrent.

Early multi-cancer detection through deep learning: An anomaly detection approach using Variational Autoencoder.

Cancer is a disease that causes many deaths worldwide. The treatment of cancer is first and foremost a matter of detection, a treatment that is most effective when the disease is detected at an early stage. With the evolution of technology, several computer-aided diagnosis tools have been developed around cancer; several image-based cancer detection methods have been developed too.

Multiscale modelling of hepatitis B virus at cell level of organization.

Multiscale modelling is a promising quantitative approach for studying infectious disease dynamics. This approach garners attention from both individuals who model diseases and those who plan for public health because it has great potential to contribute in expanding the understanding necessary for managing, reducing, and potentially exterminating infectious diseases. In this article, we developed a nested multiscale model of hepatitis B virus (HBV) that integrates the within-cell scale and the between-cell scale at cell level of organization of this disease system.

Advanced design and Engi-economical evaluation of an automatic sugarcane seed cutting machine based RGB color sensor.

There are many problems related to the use of machine learning and machine vision technology on a commercial scale for cutting sugarcane seeds. These obstacles are related to complex systems and the way the farmers operate them, the possibility of damage to the buds during the cleaning process, and the high cost of such technology. In order to address these issues, a set of RGB color sensors was used to develop an automated sugarcane seed cutting machine (ASSCM) capable of identifying the buds that had been manually marked with a unique color and then cutting them mechanically, and the sugarcane seed exit chute was provided with a sugarcane seed monitoring unit.

Drying kinetics and thermo-environmental analysis of a PV-operated tracking indirect solar dryer for tomato slices.

The purpose of this study is to investigate how a tracking indirect solar dryer (SD) powered by photovoltaic cells affected the drying kinetics (DK) and thermo-environmental conditions of tomato slices. In this current investigation, three air speeds (1, 1.5, and 2 m/s) are used, as well as three slice thicknesses (ST) (4, 6, and 8 mm) and two SD, one of which is integrated with fixed collector motion (FCM) and another with SD tracking collector motion (TCM).

Dioctylsulfosuccinate Functionalized NiAl-Layered Double Hydroxide for Sensitive Fenuron Electroanalysis Using a Carbon Paste Electrode.

Environmental pollution resulting from the use of pesticides such as fenuron poses significant health risks due to the carcinogenic and teratogenic properties of these compounds. There is an urgent need to develop rapid and cost-effective detection methods for quantifying fenuron. In this study, an inorganic-organic composite material was obtained by intercalating sodium dioctylsulfosuccinate (DSS) within the interlayer space of a nickel-aluminum-layered double hydroxide (NiAl-LDH).

Effects of spin torque within ferromagnetic infinite medium: The short-wave approximation and Painlevé analysis.

In this paper, we investigate the effects of spin-transfer torques within the ferromagnetic infinite medium through the short-wave approximation method. As a result, we have derived the new (1+1) dimensional nonlinear evolution system, which describes the propagation of electromagnetic short waves within the ferromagnet in the presence of electric current density. Using the Painlevé analysis and Hirota's bilinearization, we unearth the integrability properties of this new evolution system.

FPGA based implementation of a perturbed Chen oscillator for secure embedded cryptosystems.

This paper introduces an enhancement to the Chen chaotic system by incorporating a constant perturbation term to one of the state variables, aiming to improve the performance of pseudo-random number generators (PRNGs). The perturbation significantly enhances the system's chaotic properties, resulting in superior randomness and increased security. An FPGA-based realization of a perturbed Chen oscillator (PCO)-derived PRNG is presented, tailored for embedded cryptosystems and implemented on a Nexys 4 FPGA card featuring the XILINX Artix-7 XC7A100T-1CSG324C integrated chip.

A modified fractional short circuit current MPPT and multicellular converter for improving power quality and efficiency in PV chain.

This article presents the contribution of multicellular converters in improving of the quality of power produced in photovoltaic chain, with the aim of exploiting the maximum power produced by the photovoltaic generator with low oscillations around of the maximum power point (MPP) at steady state and to reduce switching losses. After modeling the multicellular parallel boost converter, fractional short circuit current (FSCC) MPPT was modified to get an estimated photocurrent as a reference to control the inductance current for good functioning of the converter in pursuit of the maximum power point. To verify the performance of the proposed solution, the system was submitted to irradiance and temperature variations.

Evaluation of the potential of bamboo fibers from Cameroon for the manufacture of biocomposites.

The Cameroon has two bamboo species indigenous to Africa (the and the ), and one largely exotic species, . However, little on their physical characteristics and strength for the composites materials applications is known for these two indigenous bamboos species in Cameroon. Therefore, in this study, emphasis was laid on the alpine bamboo , to evaluate its potential for biocomposites applications.

Leaves of and fruits as potent sources of natural antioxidant for stabilization of viscera FISH oil during accelerated storage.

The present study investigated the antioxidant activities of methanolic extracts of two local plants and their capacities to preserve the quality of viscera fish oil during storage. The total phenolic, total flavonoids and tannins contents were analyzed by colorimetry, the preliminary antioxidant tests done and identification of phenolic compounds by HPLC-DAD (Diode Array Detector) and ESI-MS. After these evaluation, the plant extracts were added in viscera fish oil at concentration 200-1000 ppm.

Estimated greenhouse gas emissions in the Mbalmayo thermal power plant between 2016-2020 using the genetic-Gaussian algorithm coupling.

The greenhouse gas (GHG) emissions inventories in our context result from the production of electricity from fuel oil at the Mbalmayo thermal power plant between 2016 and 2020. Our study area is located in the Central Cameroon region. The empirical method of the second level of industrialisation was applied to estimate GHG emissions and the application of the genetic algorithm-Gaussian (GA-Gaussian) coupling method was used to optimise the estimation of GHG emissions.

Hybrid optimal-FOPID based UPQC for reducing harmonics and compensate load power in renewable energy sources grid connected system.

Integration of renewable energy sources (RES) to the grid in today's electrical system is being encouraged to meet the increase in demand of electrical power and also overcome the environmental related problems by reducing the usage of fossil fuels. Power Quality (PQ) is a critical problem that could have an effect on utilities and consumers. PQ issues in the modern electric power system were turned on by a linkage of RES, smart grid technologies and widespread usage of power electronics equipment.

Optimal sizing and power losses reduction of photovoltaic systems using PSO and LCL filters.

The integration of renewable energy systems into electricity grids is a solution for strengthening electricity distribution networks (SEDNs). Renewable energies such as solar photovoltaics are suitable for reinforcing a low-voltage line by offering an electrical energy storage system. However, the integration of photovoltaic systems can lead to problems of harmonic distortion due to the presence of direct current or non-linear feedback in networks from other sources.

Preparation of a Carbon paste electrode with Active materials for the detection of Tetracycline.

The Electrochemical sensor based on carbon-clay paste electrode (CCPE) was constructed for sensitive determination of Tetracycline (Tc). The mineralogical composition, morphology, structure and performance of CCPE were characterized using X-ray diffraction powder, Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM) and Cyclic Voltammetry analysis. The CCPE is constituted of two types of clay having the ratio 1/1 and 2/1 characteristic of kaolinite and montmorillonite clay respectively.

A new automatic sugarcane seed cutting machine based on internet of things technology and RGB color sensor.

Egypt is among the world's largest producers of sugarcane. This crop is of great economic importance in the country, as it serves as a primary source of sugar, a vital strategic material. The pre-cutting planting mode is the most used technique for cultivating sugarcane in Egypt.

Enhancing electric vehicle charging performance through series-series topology resonance-coupled wireless power transfer.

The current electric vehicles (EVs) market is experiencing significant expansion, underscoring the need to address challenges associated with the limited driving range of EVs. A primary focus in this context is the improvement of the wireless charging process. To contribute to this research area, this study introduces a circular spiral coil design that incorporates transceiver coils.