Molecular Order Induced Charge Transfer in a C-Topological Insulator Moiré Heterostructure.

We synthesized and spectroscopically investigated monolayer (ML) C on the topological insulator (TI) BiTe. This C/BiTe heterostructure is characterized by an excellent translational order in a novel (4 × 4) C superstructure on a (9 × 9) cell of BiTe. Angle-resolved photoemission spectroscopy (ARPES) of C/BiTe reveals that ML C accepts electrons from the TI at room temperature, but no charge transfer occurs at low temperatures.

Post-Degradation Recovery of CsPbI Quantum Dot Solar Cells.

The stability of perovskite quantum dot solar cells is one of the key challenges of this technology. This study reveals the unique degradation behavior of cesium lead triiodide (CsPbI) quantum dot solar cells. For the first time, it is shown that the oxygen-induced degradation and performance loss of CsPbI quantum dot photovoltaic devices can be reversed by exposing the degraded samples to humidity, allowing the performance to recover and even surpass the initial performance.

Kinetics of Volatile and Nonvolatile Halide Perovskite Devices: The Conductance-Activated Quasi-Linear Memristor (CALM) Model.

Memristors stand out as promising components in the landscape of memory and computing. Memristors are generally defined by a conductance mechanism containing a state variable that imparts a memory effect. The current-voltage cycling causes transitions of conductance, which are determined by different physical mechanisms, such as the formation of conducting filaments in an insulating surrounding.

Magnetic Solitons in Hierarchical 3D Magnetic Nanoarchitectures of Nanoflower Shape.

Curvilinear magnetism emerged as a new route to tailor properties of magnetic solitons by the choice of geometry and topology of a magnetic architecture. Here, we develop an anodized aluminum oxide template-based approach to realize hierarchical 3D magnetic nanoarchitectures of nanoflower shape. The technique provides defect-free regular arrays of magnetic nanoflowers of tunable shape with a period of 400 nm over cm areas.

Skeletal Nitrogen Functionalization of Isostructural 2D Conjugated MOFs for Enhancement of the Dual-Ion Storage Capacity.

Two-dimensional conjugated metal-organic frameworks (2D c-MOFs) are emerging as promising electrode materials for electrochemical energy storage devices. However, a viable path to realize superior dual-ion storage in 2D c-MOFs has remained elusive. Here, we report the synthesis of Cu(N-OHPTP) 2D c-MOFs (x=0,1,2; OHPTP=octahydroxyphenanthrotriphenylene) with precise aromatic carbon-nitrogen arrangements, based on the π-conjugated OHPTP ligand incorporated with one or two nitrogen atoms.

Noncollinear Magnetic Structures in the Chiral Antiperovskite β-FeSeO.

We present the magnetic properties of the chiral, polar, and possibly magnetoelectric antiperovskite β-FeSeO as derived from magnetization and specific-heat measurements as well as from powder neutron diffraction and Mössbauer experiments. Our macroscopic data unambiguously reveal two magnetic phase transitions at ≈ 103 K and ≈ 78 K, while Rietveld analysis of neutron powder diffraction data reveals a noncollinear antiferromagnetic structure featuring magnetic moments in the - plane of the trigonal structure and a ferromagnetic moment along . The latter is allowed by symmetry between and , weakly visible in the magnetization data yet unresolvable microscopically.

Surface superconductivity in the topological Weyl semimetal t-PtBi.

Topological superconductivity is a promising concept for generating fault-tolerant qubits. Early experimental studies looked at hybrid systems and doped intrinsic topological or superconducting materials at very low temperatures. However, higher critical temperatures are indispensable for technological exploitation.

Orbital-selective effect of spin reorientation on the Dirac fermions in a non-charge-ordered kagome ferromagnet FeGe.

Kagome magnets provide a fascinating platform for the realization of correlated topological quantum phases under various magnetic ground states. However, the effect of the magnetic spin configurations on the characteristic electronic structure of the kagome-lattice layer remains elusive. Here, utilizing angle-resolved photoemission spectroscopy and density functional theory calculations, we report the spectroscopic evidence for the spin-reorientation effect of a kagome ferromagnet FeGe, which is composed solely of kagome planes.

Physical-Mechanical Properties and Mineral Deposition of a Pit-and-Fissure Sealant Containing Niobium-Fluoride Nanoparticles-An In Vitro Study.

This study investigated the combined effects of adding niobium-fluoride (NbF) nanoparticles to a pit-and-fissure sealant. One resin sealant was reinforced with varying amounts of nanoparticles (0.3, 0.

Interface kinetic manipulation enabling efficient and reliable MgSb thermoelectrics.

Development of efficient and reliable thermoelectric generators is vital for the sustainable utilization of energy, yet interfacial losses and failures between the thermoelectric materials and the electrodes pose a significant obstacle. Existing approaches typically rely on thermodynamic equilibrium to obtain effective interfacial barrier layers, which underestimates the critical factors of interfacial reaction and diffusion kinetics. Here, we develop a desirable barrier layer by leveraging the distinct chemical reaction activities and diffusion behaviors during sintering and operation.

Observation of Circular Dichroism Induced by Electronic Chirality.

Chiral phases of matter, characterized by a definite handedness, abound in nature, ranging from the crystal structure of quartz to spiraling spin states in helical magnets. In 1T-TiSe_{2} a source of chirality has been proposed that stands apart from these classical examples as it arises from combined electronic charge and quantum orbital fluctuations. This may allow its chirality to be accessed and manipulated without imposing either structural or magnetic handedness.

Room Temperature Synthesis of Tellurium by Solution Atomic Layer Deposition.

This study demonstrates the deposition of tellurium (Te) on silicon/silicon nitride substrates using solution atomic layer deposition (sALD) at ambient temperature. The process employs tellurium tetrachloride (TeCl) and bis(triethylsilyl)-telluride ((TES)Te) as precursors, with toluene as the solvent. Growth parameters were optimized through systematic variation of the pulse and purge times.

Comparison of Levitation Properties between Bulk High-Temperature Superconductor Blocks and High-Temperature Superconductor Tape Stacks Prepared from Commercial Coated Conductors.

Bulk high-temperature superconductors (HTSs) such as BaCuO (BCO, = Y, Gd) are commonly used in rotationally symmetric superconducting magnetic bearings. However, such bulks have several disadvantages such as brittleness, limited availability and high costs due to the time-consuming and energy-intensive fabrication process. Alternatively, tape stacks of HTS-coated conductors might be used for these devices promising an improved bearing efficiency due to a simplification of manufacturing processes for the required shapes, higher mechanical strength, improved thermal performance, higher availability and therefore potentially reduced costs.

Oxidative stress-modifying effects of TiOnanoparticles with varying content of Ti(Ti) ions.

Nanoparticles (NPs) with reactive oxygen species (ROS)-regulating ability have recently attracted great attention as promising agents for nanomedicine. In the present study, we have analyzed the effects of TiOdefect structure related to the presence of stoichiometric (Ti) and non-stoichiometric (Tiand Ti) titanium ions in the crystal lattice and TiONPs aggregation ability on HO- and tert-butyl hydroperoxide (tBOOH)-induced ROS production in L929 cells. Synthesized TiO-A, TiO-B, and TiO-C NPs with varying Ti(Ti) content were characterized by x-ray powder diffraction, transmission electron microscopy, small-angle x-ray scattering, x-ray photoelectron spectroscopy, and optical spectroscopy methods.

Thirty Years of Hide-and-Seek: Capturing Abundant but Elusive M@(8)-C Isomer, and the Study of Magnetic Anisotropy Induced in Dy Ion by the Fullerene π-Ligand.

Our knowledge about endohedral metallofullerenes (EMFs) is restricted to the structures with sufficient kinetic stability to be extracted from the arc-discharge soot and processed by chromatographic and structural techniques. For the most abundant rare-earth monometallofullerene M@C, experimental studies repeatedly demonstrated (9) and (6) carbon cage isomers, while computations predicted equal stability of the "missing" (8) isomer. Here we report that this isomer is indeed formed but has not been recovered from soot using standard protocols.

Synthesis and properties of SrLaNiWO, a new S = 1 triangular lattice magnet.

Magnetic materials featuring triangular arrangements of spins are frequently investigated as platforms hosting magnetic frustration. Hexagonal perovskites with ordered vacancies serve as excellent candidates for two-dimensional triangular magnetism due to the considerable separation of the magnetic planes. In this work, the effects of chemical pressure on the ferromagnetic ground state of BaLaNiWO by substitution of Ba with Sr to produce SrLaNiWO are investigated.

Hydroflux Synthesis and Structural Phase Transition of Rare-Earth Borate Hydroxides Na[RE(BO)(OH)] (RE=Y, Gd-Er).

Reacting REO and HBO in an ultra-alkaline NaOH hydroflux at about 250 °C yielded pure, crystalline samples of Na[RE(BO)(OH)] (RE=Y, Gd-Er). The compounds dehydrate to NaRE(BO) upon heating in air to about 500 °C. Na[RE(BO)(OH)] (RE=Tb-Er) are photoluminescent under UV radiation.

Stabilization Strategies of Lithium Metal Anode Toward Dendrite-Free Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are considered as a most promising rechargeable lithium metal batteries because of their high energy density and low cost. However, the Li-S batteries mainly suffer the capacity decay issue caused by the shutting effect of lithium polysulfides and the safety issues arising from the Li dendrites formation. This review outlines the current issues of Li-S batteries.

Anisotropic magnetoresistance in altermagnetic MnTe.

Recently, MnTe was established as an altermagnetic material that hosts spin-polarized electronic bands as well as anomalous transport effects like the anomalous Hall effect. In addition to these effects arising from altermagnetism, MnTe also hosts other magnetoresistance effects. Here, we study the manipulation of the magnetic order by an applied magnetic field and its impact on the electrical resistivity.

Advanced materials for micro/nanorobotics.

Autonomous micro/nanorobots capable of performing programmed missions are at the forefront of next-generation micromachinery. These small robotic systems are predominantly constructed using functional components sourced from micro- and nanoscale materials; therefore, combining them with various advanced materials represents a pivotal direction toward achieving a higher level of intelligence and multifunctionality. This review provides a comprehensive overview of advanced materials for innovative micro/nanorobotics, focusing on the five families of materials that have witnessed the most rapid advancements over the last decade: two-dimensional materials, metal-organic frameworks, semiconductors, polymers, and biological cells.