Influence of Lamb Wave Anisotropy on Detection of Water-to-Ice Phase Transition.

An important technical task is to develop methods for recording the phase transitions of water to ice. At present, many sensors based on various types of acoustic waves are suggested for solving this challenge. This paper focuses on the theoretical and experimental study of the effect of water-to-ice phase transition on the properties of Lamb and quasi shear horizontal (QSH) acoustic waves of a higher order propagating in different directions in piezoelectric plates with strong anisotropy.

Second-order nonlinear mixing processes involving a leaky guided acoustic wave.

Quasi-phasematched mixing processes of acoustic waves via second-order nonlinearity are analyzed with two perfectly guided waves generating a leaky wave. The efficiency of such processes is quantified by an acoustic nonlinearity parameter (ANP), defined as the linear growth rate of the leaky wave's amplitude in the initial stage of its spatial evolution. Two approximate ways of estimating the ANP of such processes are suggested.

The study of the influence of the geometry of a lateral electric field resonator on its resonant characteristics.

An experimental study of the dependence of the electrical impedance of a lateral electric field resonator on its thickness and the size of the gap between the electrodes was carried out. The resonator was made of PZT-19 piezoceramics in the form of a rectangular parallelepiped with the shear dimensions of 18 × 20 mm. Two rectangular electrodes with a gap that varied in the range from 4 to 14 mm were applied on one side of the resonator.

Multi-Parameter Characterization of Liquid-to-Ice Phase Transition Using Bulk Acoustic Waves.

The detection of the liquid-to-ice transition is an important challenge for many applications. In this paper, a method for multi-parameter characterization of the liquid-to-ice phase transition is proposed and tested. The method is based on the fundamental properties of bulk acoustic waves (BAWs).

Complete electromagnetic consideration of plasmon mode excitation in graphene rectangles by incident terahertz wave.

The excitation of terahertz plasmon modes in a graphene rectangle by normally incident linearly polarized electromagnetic wave has been theoretically studied. The complete electromagnetic approach based on formulation of the integral equations for sought-for electromagnetic quantities has been developed. The influence of edge-field effects on excitation of plasmon modes for different polarization of the incident wave and different shapes of graphene rectangle has been studied.

Generation of time-independent torque by ultrasonic guided waves.

The excitation of acoustic waves by a unidirectional transducer, integrated in a piezoelectric cylindrical tube or disk, can lead to a time-independent torque. This phenomenon, demonstrated earlier in experiments and analyzed with coupling-of mode theory, is explained in detail, starting on the level of lattice dynamics of a piezoelectric crystal. Expressions are derived for the stationary torque in the form of integrals over the volume or surface of the piezoelectric, involving the electric potential and displacement field associated with the acoustic waves generated by the transducer.

Adapted MLP-Mixer network based on crossbar arrays of fast and multilevel switching (Co-Fe-B)(LiNbO) nanocomposite memristors.

MLP-Mixer based on multilayer perceptrons (MLPs) is a novel architecture of a neuromorphic computing system (NCS) introduced for image classification tasks without convolutional layers. Its software realization demonstrates high classification accuracy, although the number of trainable weights is relatively low. One more promising way of improving the NCS performance, especially in terms of power consumption, is its hardware realization using memristors.

Energy-Trapping Characteristics of Lateral Field Excited GdCOB Crystal Bulk Acoustic Wave Devices Based on Stepped Electrodes.

In this work, high-frequency forced vibrations of lateral field excitation (LFE) devices with stepped electrodes based on monoclinic crystals GdCOB are modeled, and the influence laws of the device parameters (the step number, size, and thickness of the stepped electrodes) on the energy-trapping effects of the device are revealed. The results show that the step number has a significant effect on the energy-trapping effect of the device: with the increase in the step number, the stronger energy-trapping effect of the device can be obtained; with the increase in the thickness difference of two layers of electrodes, the energy-trapping effect of the device becomes stronger; with the increase in the difference of the electrode radius, the energy-trapping effect of the device is enhanced gradually. The results of this work can provide an important theoretical basis for the design of stepped-electrode LFE resonators and sensors with high-quality factors based on monoclinic crystals.

Optical Sensors for Bacterial Detection.

Analytical devices for bacterial detection are an integral part of modern laboratory medicine, as they permit the early diagnosis of diseases and their timely treatment. Therefore, special attention is directed to the development of and improvements in monitoring and diagnostic methods, including biosensor-based ones. A promising direction in the development of bacterial detection methods is optical sensor systems based on colorimetric and fluorescence techniques, the surface plasmon resonance, and the measurement of orientational effects.

Nanocomposites Based on Polyethylene and Nickel Ferrite: Preparation, Characterization, and Properties.

Composite materials based on NiFeO nanoparticles and polyethylene matrix have been synthesized by thermal decomposition to expand the application area of high-pressure polyethylene by filling it with nanoscale particles. The synthesized compositions were obtained in the form of a dark gray powder and compressed for further study According to TEM, the average particle size in composites was 2, 3, and 4 nm in samples with a filling of 10%, 20% and 30%. The concentration dependences of the specific electrical resistivity ρ, dielectric permittivity ε, saturation magnetization M and the parameters of reflection and attenuation of microwave power of the obtained composites were investigated.

Electroacoustic Biosensor Systems for Evaluating Antibiotic Action on Microbial Cells.

Antibiotics are widely used to treat infectious diseases. This leads to the presence of antibiotics and their metabolic products in the ecosystem, especially in aquatic environments. In many countries, the growth of pathogen resistance to antibiotics is considered a threat to national security.

Quasiepitaxial Aluminum Film Nanostructure Optimization for Superconducting Quantum Electronic Devices.

In this paper, we develop fabrication technology and study aluminum films intended for superconducting quantum nanoelectronics using AFM, SEM, XRD, HRXRR. Two-temperature-step quasiepitaxial growth of Al on (111) Si substrate provides a preferentially (111)-oriented Al polycrystalline film and reduces outgrowth bumps, peak-to-peak roughness from 70 to 10 nm, and texture coefficient from 3.5 to 1.

Brillouin-Scattering Induced Noise in DAS: A Case Study.

In the paper, the effect of spontaneous Brillouin scattering (SpBS) is analyzed as a noise source in distributed acoustic sensors (DAS). The intensity of the SpBS wave fluctuates over time, and these fluctuations increase the noise power in DAS. Based on experimental data, the probability density function (PDF) of the spectrally selected SpBS Stokes wave intensity is negative exponential, which corresponds to the known theoretical conception.

Gap electroacoustic waves in-symmetric piezoelectric heterostructure near the exceptional point.

The spectral properties of gap electroacoustic waves in a-symmetric structure of piezoelectrics of symmetry class 6 mm separated by a gap are theoretically investigated. The spectra were calculated for lead germanate (non-zero transverse piezoactivity) and barium titanate (symmetry class 4 mm-zero transverse piezoactivity). It has been established that at a certain level of losses and gain in piezoelectrics, the symmetric and antisymmetric modes intersect.

Pure- and Pseudo-Lateral-Field-Excitation Characteristics of Relaxor Ferroelectric Single Crystal PMN-PT.

The relaxor ferroelectric single crystal (1-x)Pb(MgNb)O-xPbTiO (PMN-PT) has high piezoelectric constants, and thus has a good application prospect in the field of highly sensitive piezoelectric sensors. In this paper, for relaxor ferroelectric single crystal PMN-PT, the bulk acoustic wave characteristics on pure- and pseudo-lateral-field-excitation (pure- and pseudo-LFE) modes are investigated. LFE piezoelectric coupling coefficients and acoustic wave phase velocities for PMN-PT crystals in different cuts and electric field directions are calculated.

Langmuir-Blodgett Films with Immobilized Glucose Oxidase Enzyme Molecules for Acoustic Glucose Sensor Application.

In this work, a sensitive coating based on Langmuir-Blodgett (LB) films containing monolayers of 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) with an immobilized glucose oxidase (GOx) enzyme was created. The immobilization of the enzyme in the LB film occurred during the formation of the monolayer. The effect of the immobilization of GOx enzyme molecules on the surface properties of a Langmuir DPPE monolayer was investigated.

Microwave resonator-based sensor system for specific antibody detection.

An antibody-detecting sensor is described that is based on a microwave electrodynamic resonator. A polystyrene film with immobilized bacteria deposited on a lithium niobate plate was placed at one end of the resonator and was used as the sensing element. The second end was electrically shorted.

Two-Dimensional Plasmons in Laterally Confined 2D Electron Systems.

The collective oscillations of charge density (plasmons) in conductive solids are basic excitations that determine the dynamic response of the system. In infinite two-dimensional (2D) electron systems, plasmons have gapless dispersion covering a broad spectral range from subterahertz to infrared, which is promising in light-matter applications. We discuss the state-of-the-art physics of 2D plasmons, especially in confined 2D electron systems in stripe and disk geometry, using the simplest approach for conductivity.

Terahertz amplification and lasing by using transverse electric modes in a two-layer-graphene-dielectric waveguide structure with direct current.

We study for the first time the interaction between the waveguide modes of graphene structure and freely propagating terahertz (THz) electromagnetic waves (this interaction takes place within the light cone). We revealed a new and rather unexpected physical phenomenon by showing that freely incident THz electromagnetic waves can resonate with the surface transverse electric (TE) modes of the graphene waveguide in virtue of these modes having their dispersions in the vicinity of the light cone. The dispersion and amplification of surface TE modes in a dielectric waveguide covered with two graphene layers biased by direct current (DC), as well the amplification and lasing of incident THz wave by excitation of TE mode resonances, are investigated.

Directional couplings between the respiration and parasympathetic control of the heart rate during sleep and wakefulness in healthy subjects at different ages.

Cardiorespiratory interactions are important, both for understanding the fundamental processes of functioning of the human body and for development of methods for diagnostics of various pathologies. The properties of cardiorespiratory interaction are determined by the processes of autonomic control of blood circulation, which are modulated by the higher nervous activity. We study the directional couplings between the respiration and the process of parasympathetic control of the heart rate in the awake state and different stages of sleep in 96 healthy subjects from different age groups.

Features of the Formation of Sensitive Films Based on Mycelium of Higher Fungi for Surface and Plate Acoustic Waves Gas Sensors.

A comparative analysis of the responses of two types of acoustic waves (surface SAW and plate APW) with close frequencies and the same type of waves (SAW) with different frequencies toward various liquid vapors (water, acetone, ethanol) was carried out in this paper. Two types of films based on mycelium of higher fungus (Curtis) P. Karst () prepared by various methods were used as sensitive coatings.

Backward Acoustic Waves in Piezoelectric Plates: Possible Application as Base for Liquid Sensors.

Backward acoustic waves are characterized by oppositely directed phase and group velocities. These waves can exist in isotropic and piezoelectric plates. They can be detected using a set of interdigital transducers with different spatial periods located on the same piezoelectric substrate.

Langmuir-Blodgett Films of Arachidic and Stearic Acids as Sensitive Coatings for Chloroform HF SAW Sensors.

Properties of the Langmuir-Blodgett (LB) films of arachidic and stearic acids, versus the amount of the films' monolayers were studied and applied for chloroform vapor detection with acoustoelectric high-frequency SAW sensors, based on an AT quartz two-port Rayleigh type SAW resonator (414 MHz) and ST-X quartz SAW delay line (157.5 MHz). Using both devices, it was confirmed that the film with 17 monolayers of stearic acid deposited on the surface of the SAW delay line at a surface pressure of 30 mN/m in the solid phase has the best sensitivity towards chloroform vapors, compared with the same films with other numbers of monolayers.

Special scattering regimes for conical all-dielectric nanoparticles.

All-dielectric nanophotonics opens a venue for a variety of novel phenomena and scattering regimes driven by unique optical effects in semiconductor and dielectric nanoresonators. Their peculiar optical signatures enabled by simultaneous electric and magnetic responses in the visible range pave a way for a plenty of new applications in nano-optics, biology, sensing, etc. In this work, we investigate fabrication-friendly truncated cone resonators and achieve several important scattering regimes due to the inherent property of cones-broken symmetry along the main axis without involving complex geometries or structured beams.