Peptide derived from stromal cell-derived factor 1δ enhances the expression of osteogenic proteins bone marrow stromal cell differentiation and promotes bone formation in models.

Mesenchymal stem cells (MSCs) rely on chemokines and chemokine receptors to execute their biological and physiological functions. Stromal cell-derived factor-1 (SDF-1) is upregulated in injury sites, where it acts as a chemotactic agent, attracting CXCR4-expressing MSCs, which play a pivotal role in the healing and regeneration of tissue throughout the body. Furthermore, SDF-1 expression has been observed in regions experiencing inflammation-induced bone destruction and fracture sites.

A bioactive microparticle-loaded osteogenically enhanced bioprinted scaffold that permits sustained release of BMP-2.

Extrusion-based bioprinting technology is widely used for tissue regeneration and reconstruction. However, the method that uses only hydrogel as the bioink base material exhibits limited biofunctional properties and needs improvement to achieve the desired tissue regeneration. In this study, we present a three-dimensionally printed bioactive microparticle-loaded scaffold for use in bone regeneration applications.

Flash-Induced High-Throughput Porous Graphene via Synergistic Photo-Effects for Electromagnetic Interference Shielding.

Porous 2D materials with high conductivity and large surface area have been proposed for potential electromagnetic interference (EMI) shielding materials in future mobility and wearable applications to prevent signal noise, transmission inaccuracy, system malfunction, and health hazards. Here, we report on the synthesis of lightweight and flexible flash-induced porous graphene (FPG) with excellent EMI shielding performance. The broad spectrum of pulsed flashlight induces photo-chemical and photo-thermal reactions in polyimide films, forming 5 × 10 cm-size porous graphene with a hollow pillar structure in a few milliseconds.

Diagnosing Time-Varying Harmonics in Low-k Oxide Thin Film (SiOF) Deposition by Using HDP CVD.

This study identified time-varying harmonic characteristics in a high-density plasma (HDP) chemical vapor deposition (CVD) chamber by depositing low-k oxide (SiOF). The characteristics of harmonics are caused by the nonlinear Lorentz force and the nonlinear nature of the sheath. In this study, a noninvasive directional coupler was used to collect harmonic power in the forward and reverse directions, which were low frequency (LF) and high bias radio frequency (RF).

Hybrid Device Fabrication Using Roll-to-Roll Printing for Personal Environmental Monitoring.

Roll-to-roll (R2R) printing methods are well known as additive, cost-effective, and ecologically friendly mass-production methods for processing functional materials and fabricating devices. However, implementing R2R printing to fabricate sophisticated devices is challenging because of the efficiency of material processing, the alignment, and the vulnerability of the polymeric substrate during printing. Therefore, this study proposes the fabrication process of a hybrid device to solve the problems.

NK cells encapsulated in micro/macropore-forming hydrogels via 3D bioprinting for tumor immunotherapy.

Background: Patients face a serious threat if a solid tumor leaves behind partial residuals or cannot be completely removed after surgical resection. Immunotherapy has attracted attention as a method to prevent this condition. However, the conventional immunotherapy method targeting solid tumors, that is, intravenous injection, has limitations in homing in on the tumor and in vivo expansion and has not shown effective clinical results.

Visual and thermal camouflage on different terrestrial environments based on electrochromism.

Hiding terrestrial objects from aerial monitoring has long been an important objective in national security and public safety. However, the diversity of terrestrial environments raises great challenges to traditional camouflages optimized for a single spectral band or single type of background environment, rendering them vulnerable in other bands or backgrounds. Herein, we experimentally demonstrate simultaneous visual and thermal camouflage that can adapt to two different environments based on a thermally emissive electrochromic layer.

Intense Pulsed Light Thermal Treatment of Pb(Zr,Ti)O /Metglas Heterostructured Films Resulting in Extreme Magnetoelectric Coupling of over 20 V cm Oe.

Magnetoelectric (ME) film composites consisting of piezoelectric and magnetostrictive materials are promising candidates for application in magnetic field sensors, energy harvesters, and ME antennas. Conventionally, high-temperature annealing is required to crystallize piezoelectric films, restricting the use of heat-sensitive magnetostrictive substrates that enhance ME coupling. Herein, a synergetic approach is demonstrated for fabricating ME film composites that combines aerosol deposition and instantaneous thermal treatment based on intense pulsed light (IPL) radiation to form piezoelectric Pb(Zr,Ti)O (PZT) thick films on an amorphous Metglas substrate.

Micro-/Nanohierarchical Structures Physically Engineered on Surfaces: Analysis and Perspective.

The high demand for micro-/nanohierarchical structures as components of functional substrates, bioinspired devices, energy-related electronics, and chemical/physical transducers has inspired their in-depth studies and active development of the related fabrication techniques. In particular, significant progress has been achieved in hierarchical structures physically engineered on surfaces, which offer the advantages of wide-range material compatibility, design diversity, and mechanical stability, and numerous unique structures with important niche applications have been developed. This review categorizes the basic components of hierarchical structures physically engineered on surfaces according to function/shape and comprehensively summarizes the related advances, focusing on the fabrication strategies, ways of combining basic components, potential applications, and future research directions.

Water-resistant free-standing DNA-complexed films with antioxidant and HO-responsive activity.

Water-insoluble DNA complexes are suitable for producing free-standing DNA films due to their low water sensitivity, which prevents their rapid degradation in aqueous environments. Here, we proposed two types of free-standing films that exhibit low dissolution rates in water: low molecular weight chitosan (LCS)-DNA films and phosphatidylcholine (PC)-cetyltrimethylammonium (CTMA)-DNA films. The structure and binding characteristics of the LCS-DNA and PC-CTMA-DNA complexes were investigated with UV-Vis spectroscopy and the fluorescent characteristics of daunorubicin bound to them.

Clinical Validation of a Wearable Piezoelectric Blood-Pressure Sensor for Continuous Health Monitoring.

Wearable blood-pressure sensors have recently attracted attention as healthcare devices for continuous non-invasive arterial pressure (CNAP) monitoring. However, the accuracy of wearable blood-pressure (BP) monitoring devices has been controversial due to the low signal quality of sensors, the absence of an accurate transfer function to convert the sensor signals into BP values, and the lack of clinical validation regarding measurement precision. Here, a wearable piezoelectric blood-pressure sensor (WPBPS) is reported, which achieves a high normalized sensitivity (0.

Ultra-sensitive label-free SERS biosensor with high-throughput screened DNA aptamer for universal detection of SARS-CoV-2 variants from clinical samples.

COVID-19, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has caused an ongoing global pandemic with economic and social disruption. Moreover, the virus has persistently and rapidly evolved into novel lineages with mutations. The most effective strategy to control the pandemic is suppressing virus spread through early detection of infections.

Nanotransfer-on-Things: From Rigid to Stretchable Nanophotonic Devices.

The growing demand for nanophotonic devices has driven the advancement of nanotransfer printing (nTP) technology. Currently, the scope of nTP is limited to certain materials and substrates owing to the temperature, pressure, and chemical bonding requirements. In this study, we developed a universal nTP technique utilizing covalent bonding-based adhesives to improve the adhesion between the target material and substrate.

Development of the Tele-Measurement of Plasma Uniformity via Surface Wave Information (TUSI) Probe for Non-Invasive In-Situ Monitoring of Electron Density Uniformity in Plasma Display Fabrication Process.

The importance of monitoring the electron density uniformity of plasma has attracted significant attention in material processing, with the goal of improving production yield. This paper presents a non-invasive microwave probe for in-situ monitoring electron density uniformity, called the Tele-measurement of plasma Uniformity via Surface wave Information (TUSI) probe. The TUSI probe consists of eight non-invasive antennae and each antenna estimates electron density above the antenna by measuring the surface wave resonance frequency in a reflection microwave frequency spectrum (S11).

Nanoscale three-dimensional fabrication based on mechanically guided assembly.

The growing demand for complex three-dimensional (3D) micro-/nanostructures has inspired the development of the corresponding manufacturing techniques. Among these techniques, 3D fabrication based on mechanically guided assembly offers the advantages of broad material compatibility, high designability, and structural reversibility under strain but is not applicable for nanoscale device printing because of the bottleneck at nanofabrication and design technique. Herein, a configuration-designable nanoscale 3D fabrication is suggested through a robust nanotransfer methodology and design of substrate's mechanical characteristics.

Conductive Thread-Based Immunosensor for Pandemic Influenza A (H1N1) Virus Detection.

Infectious agents such as viruses pose significant threats to human health, being transmitted via direct contact as well as airborne transmission without direct contact, thus requiring rapid detection to prevent the spread of infectious diseases. In this study, we developed a conductive thread-based immunosensor (CT-IS), a biosensor to easily detect the presence of airborne viruses. CT-IS utilizes an antibody that specifically recognizes the HA protein of the pandemic influenza A (pH1N1) virus, which is incorporated into the conductive thread.

Assembling Vertical Nanogap Arrays with Nanoentities for Highly Sensitive Electrical Biosensing.

Nanogap biosensors have emerged as promising platforms for detecting and measuring biochemical substances at low concentrations. Although the nanogap biosensors provide high sensitivity, low limit of detection (LOD), and enhanced signal strength, it requires arduous fabrication processes and costly equipment to obtain micro/nanoelectrodes with extremely narrow gaps in a controlled manner. In this work, we report the novel design and fabrication processes of vertical nanogap structures that can electrically detect and quantify low-concentration biochemical substances.

Continuous Patterning of Silver Nanowire-Polyvinylpyrrolidone Composite Transparent Conductive Film by a Roll-to-Roll Selective Calendering Process.

The roll-to-roll (R2R) continuous patterning of silver nanowire-polyvinylpyrrolidone (Ag NW-PVP) composite transparent conductive film (cTCF) is demonstrated in this work by means of slot-die coating followed by selective calendering. The Ag NWs were synthesized by the polyol method, and adequately washed to leave an appropriate amount of PVP to act as a capping agent and dispersant. The as-coated Ag NW-PVP composite film had low electronic conductivity due to the lack of percolation path, which was greatly improved by the calendering process.

Ni/Co/CoO@C nanorods derived from a MOF@MOF hybrid for efficient overall water splitting.

The design of nanostructured materials for efficient bifunctional electrocatalysts has gained tremendous attention, yet developing a fast and effective synthesis strategy remains a challenge. Here, we present a fast and scalable synthetic method of Ni/Co/CoO@C nanorods for efficient overall water splitting. Using microwave synthesis, we first produced a unique Ni-MOF@Co-MOF in a few minutes.

Multidimensional Honeycomb-like DNA Nanostructures Made of C-Motifs.

Thanks to its remarkable properties of self-assembly and molecular recognition, DNA can be used in the construction of various dimensional nanostructures to serve as templates for decorating nanomaterials with nanometer-scale precision. Accordingly, this study discusses a design strategy for fabricating such multidimensional DNA nanostructures made of simple C-motifs. One-dimensional (1D) honeycomb-like tubes (1HTs) and two-dimensional (2D) honeycomb-like lattices (2HLs) were constructed using a C-motif with an arm length of 14 nucleotides (nt) at an angle of 240° along the counterclockwise direction.

Proteolysis-driven proliferation and rigidification of pepsin-resistant amyloid fibrils.

Proteolysis of amyloids is related to prevention and treatment of amyloidosis. What if the conditions for proteolysis were the same to those for amyloid formation? For example, pepsin, a gastric protease is activated in an acidic environment, which, interestingly, is also a condition that induces the amyloid formation. Here, we investigate the competition reactions between proteolysis and synthesis of amyloid under pepsin-activated conditions.

An angle-compensating colorimetric strain sensor with wide working range and its fabrication method.

The visual response is one of the most intuitive principles of sensors. Therefore, emission and change of the colors are widely studied for development of chemical, thermal and mechanical sensors. And it is still a challenging issue to fabricate them with a simple working mechanism, high sensitivity, good reliability, and a cost-effective fabrication process.

Observation of prior light emission before arcing development in a low-temperature plasma with multiple snapshot analysis.

Arcing is a ubiquitous phenomenon and a crucial issue in high-voltage applied systems, especially low-temperature plasma (LTP) engineering. Although arcing in LTPs has attracted interest due to the severe damage it can cause, its underlying mechanism has yet to be fully understood. To elucidate the arcing mechanism, this study investigated various signals conventionally used to analyze arcing such as light emission, arcing current and voltage, and background plasma potential.

Fast Responsive, Reversible Colorimetric Nanoparticle-Hydrogel Complexes for pH Monitoring.

Hydrogels containing redox-sensitive colorimetric nanoparticles (NPs) have been used to sense ambient pH in many fields owing to their simple and fast visualization capabilities. However, real-time pH monitoring still has limitations due to its poor response rate and irreversibility. Herein, we developed a fast responsive colorimetric hydrogel called ferrocene adsorption colorimetric hydrogel (FACH).