Time-resolved spectroscopic investigation for the practical application of a photocatalytic air purifier.

The photocatalytic efficiency for removing volatile organic compounds (VOCs) is significantly influenced by operational parameters like humidity and flow velocity, exhibiting notable and inconsistent fluctuations in both lab-scale and large-scale demonstrations. In this study, operando spectroscopy and isotope analysis were employed to investigate the correlation between humidity levels and degradation of gaseous acetaldehyde using TiO photocatalysts, aiming to demonstrate the scaling-up of photocatalytic air purifier. It was observed that rate constants for the mineralization of acetaldehyde rapidly decreased by 30% as relative humidity increased from 25% to 80% in the flow system (with an air velocity, v = 0.

Ethanol purification enables high-quality α-phase FAPbI perovskite microcrystals for commercial photovoltaic applications.

Reliable quality and sustainable processes must be developed for commodities to enter the commercial stage. For next-generation photovoltaic applications such as perovskite solar cells, it is essential to manufacture high-quality photoactive perovskites eco-friendly processes. We demonstrate that ethanol, an ideal green solvent, can be applied to yield efficient alpha-phase FAPbI perovskite microcrystals.

Surface-Originated Weak Confinement in Tetrahedral Indium Arsenide Quantum Dots.

While the shape-dependent quantum confinement (QC) effect in anisotropic semiconductor nanocrystals has been extensively studied, the QC in facet-specified polyhedral quantum dots (QDs) remains underexplored. Recently, tetrahedral nanocrystals have gained prominence in III-V nanocrystal synthesis. In our study, we successfully synthesized well-faceted tetrahedral InAs QDs with a first excitonic absorption extending up to 1700 nm.

How hetero-single-atom dispersion reconstructed electronic structure of carbon materials and regulated Fenton-like oxidation pathways.

Single-atom catalysts (SACs) have emerged as competitive candidates for Fenton-like oxidation of micro-pollutants in water. However, the impact of metal insertion on the intrinsic catalytic activity of carrier materials has been commonly overlooked, and the environmental risk due to metal leaching still requires attention. In contrast to previous reports, where metal sites were conventionally considered as catalytic centers, our study investigates, for the first time, the crucial catalytic role of the carbon carrier modulated through hetero-single-atom dispersion and the regulation of Fenton-like oxidation pathways.

Defect engineered ternary metal spinel-type Ni-Fe-Co oxide as bifunctional electrocatalyst for overall electrochemical water splitting.

Transition metal spinel oxides were engineered with active elements as bifunctional water splitting electrocatalysts to deliver superior intrinsic activity, stability, and improved conductivity to support green hydrogen production. In this study, we reported the ternary metal Ni-Fe-Co spinel oxide electrocatalysts prepared by defect engineering strategy with rich and deficient Na ions, termed NFCO-Na and NFCO, which suggest the formation of defects with Na forming tensile strain. The Na-rich NiFeCoO spinel oxide reveals lattice expansion, resulting in the formation of a defective crystal structure, suggesting higher electrocatalytic active sites.

Polymeric liquids in mesoporous photonic structures: From precursor film spreading to imbibition dynamics at the nanoscale.

Polymers are known to wet nanopores with high surface energy through an atomically thin precursor film followed by slower capillary filling. We present here light interference spectroscopy using a mesoporous membrane-based chip that allows us to observe the dynamics of these phenomena in situ down to the sub-nanometer scale at milli- to microsecond temporal resolution. The device consists of a mesoporous silicon film (average pore size 6 nm) with an integrated photonic crystal, which permits to simultaneously measure the phase shift of thin film interference and the resonance of the photonic crystal upon imbibition.

Surface triggered stabilization of metastable charge-ordered phase in SrTiO.

Charge ordering (CO), characterized by a periodic modulation of electron density and lattice distortion, has been a fundamental topic in condensed matter physics, serving as a potential platform for inducing novel functional properties. The charge-ordered phase is known to occur in a doped system with high d-electron occupancy, rather than low occupancy. Here, we report the realization of the charge-ordered phase in electron-doped (100) SrTiO epitaxial thin films that have the lowest d-electron occupancy i.

Low-Temperature controlled synthesis of nanocast mixed metal oxide spinels for enhanced OER activity.

The controlled cation substitution is an effective strategy for optimizing the density of states and enhancing the electrocatalytic activity of transition metal oxide catalysts for water splitting. However, achieving tailored mesoporosity while maintaining elemental homogeneity and phase purity remains a significant challenge, especially when aiming for complex multi-metal oxides. In this study, we utilized a one-step impregnation nanocasting method for synthesizing mesoporous Mn-, Fe-, and Ni-substituted cobalt spinel oxide (MnFeNiCoO, MFNCO) and demonstrate the benefits of low-temperature calcination within a semi-sealed container at 150-200 °C.

Structurally engineered highly efficient electrocatalytic performance of 3-dimensional Mo/Ni chalcogenides for boosting overall water splitting performance.

Hydrogen production from water splitting combined with renewable electricity can provide a viable solution to the energy crisis. A novel MoS/NiS/NiS heterostructure is designed as a bifunctional electrocatalyst by facile hydrothermal method to demonstrate excellent electrocatalytic performance towards overall water splitting applications. MoS/NiS/NiS heterostructure necessitates a low overpotential of 81 mV and 210 mV to attain a current density of 10 mA cm during the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively.

Colloidal InAs Quantum Dot-Based Infrared Optoelectronics Enabled by Universal Dual-Ligand Passivation.

Solution-processed low-bandgap semiconductors are crucial to next-generation infrared (IR) detection for various applications, such as autonomous driving, virtual reality, recognitions, and quantum communications. In particular, III-V group colloidal quantum dots (CQDs) are interesting as nontoxic bandgap-tunable materials and suitable for IR absorbers; however, the device performance is still lower than that of Pb-based devices. Herein, a universal surface-passivation method of InAs CQDs enabled by intermediate phase transfer (IPT), a preliminary process that exchanges native ligands with aromatic ligands on the CQD surface is presented.

Accelerated chemical science with AI.

In light of the pressing need for practical materials and molecular solutions to renewable energy and health problems, to name just two examples, one wonders how to accelerate research and development in the chemical sciences, so as to address the time it takes to bring materials from initial discovery to commercialization. Artificial intelligence (AI)-based techniques, in particular, are having a transformative and accelerating impact on many if not most, technological domains. To shed light on these questions, the authors and participants gathered in person for the ASLLA Symposium on the theme of 'Accelerated Chemical Science with AI' at Gangneung, Republic of Korea.

Bismuth ferrite based acetone gas sensor: evaluation of graphene oxide loading.

We report a BiFeO/graphene oxide (BFO/GO) perovskite, synthesized using a CTAB-functionalized glycine combustion route, as a potential material for acetone gas sensing applications. The physicochemical properties of the developed perovskite were analysed using XRD, FE-SEM, TEM, HRTEM, EDAX and XPS. The gas sensing performance was analysed for various test gases, including ethanol, acetone, propanol, ammonia, nitric acid, hydrogen sulphide and trimethylamine at a concentration of 500 ppm.

Vitamin C-induced CO capture enables high-rate ethylene production in CO electroreduction.

High-rate production of multicarbon chemicals via the electrochemical CO reduction can be achieved by efficient CO mass transport. A key challenge for C-C coupling in high-current-density CO reduction is how to promote *CO formation and dimerization. Here, we report molecularly enhanced CO-to-*CO conversion and *CO dimerization for high-rate ethylene production.

2D-Material-Assisted GaN Growth on GaN Template by MOCVD and Its Exfoliation Strategy.

The production of freestanding membranes using two-dimensional (2D) materials often involves techniques such as van der Waals (vdW) epitaxy, quasi-vdW epitaxy, and remote epitaxy. However, a challenge arises when attempting to manufacture freestanding GaN by using these 2D-material-assisted growth techniques. The issue lies in securing stability, as high-temperature growth conditions under metal-organic chemical vapor deposition (MOCVD) can cause damage to the 2D materials due to GaN decomposition of the substrate.

Improving the Device Performance of CZTSSe Thin-Film Solar Cells via Indium Doping.

Cation incorporation emerges as a promising approach for improving the performance of the kesterite CuZnSn(S,Se) (CZTSSe) device. Herein, we report indium (In) doping using the chemical bath deposition (CBD) technique to enhance the optoelectronic properties of CZTSSe thin-film solar cells (TFSCs). To incorporate a small amount of the In element into the CZTSSe absorber thin films, an ultrathin (<10 nm) layer of InS is deposited on soft-annealed precursor (Zn-Sn-Cu) thin films prior to the sulfo-selenization process.

Ultra-Thin Hydrogen-Organic-Framework (HOF) Nanosheets for Ultra-Stable Alkali Ions Battery Storage.

Organic frameworks-based batteries with excellent physicochemical stability and long-term high capacity will definitely reduce the cost, carbon emissions, and metal consumption and contamination. Here, an ultra-stable and ultra-thin perylene-dicyandiamide-based hydrogen organic framework (HOF) nanosheet (P-DCD) of ≈3.5 nm in thickness is developed.

Freezing-Enhanced Photoreduction of Iodate by Fulvic Acid.

Iodate is a stable form of iodine species in the natural environment. This work found that the abiotic photosensitized reduction of iodate by fulvic acid (FA) is highly enhanced in frozen solution compared to that in aqueous solution. The freezing-induced removal of iodate by FA at an initial pH of 3.

Utilization of 2D materials in aqueous zinc ion batteries for safe energy storage devices.

Aqueous rechargeable battery has been an intense topic of research recently due to the significant safety issues of conventional Li-ion batteries (LIBs). Amongst the various candidates of aqueous batteries, aqueous zinc ion batteries (AZIBs) hold great promise as a next generation safe energy storage device due to its low cost, abundance in nature, low toxicity, environmental friendliness, low redox potential, and high theoretical capacity. Yet, the promise has not been realized due to their limitations, such as lower capacity compared to traditional LIB, dendrite growth, detrimental degradation of electrode materials structure as ions intercalate/de-intercalate, and gas evolution/corrosion at the electrodes, which remains a significant challenge.

Unveiling the spatially confined oxidation processes in reactive electrochemical membranes.

Electrocatalytic oxidation offers opportunities for sustainable environmental remediation, but it is often hampered by the slow mass transfer and short lives of electro-generated radicals. Here, we achieve a four times higher kinetic constant (18.9 min) for the oxidation of 4-chlorophenol on the reactive electrochemical membrane by reducing the pore size from 105 to 7 μm, with the predominate mechanism shifting from hydroxyl radical oxidation to direct electron transfer.

Roles of Heterojunction and Cu Vacancies in the Au@CuSe for the Enhancement of Electrochemical Nitrogen Reduction Performance.

The utilization of hydrogen (H) as a fuel source is hindered by the limited infrastructure and storage requirements. In contrast, ammonia (NH) offers a promising solution as a hydrogen carrier due to its high energy density, liquid storage capacity, low cost, and sustainable manufacturing. NH has garnered significant attention as a key component in the development of next-generation refueling stations, aligning with the goal of a carbon-free economy.

Enhanced Oxidation of Organic Compounds by the Ferrihydrite-Ferrate System: The Role of Intramolecular Electron Transfer and Intermediate Iron Species.

Previous studies mostly held that the oxidation capacity of ferrate depends on the involvement of intermediate iron species (i.e., Fe/Fe), however, the potential role of the metastable complex was disregarded in ferrate-based heterogeneous catalytic oxidation processes.

Synergistic material modification-induced optimization of interfacial charge transfer and surface hydrogen adsorption.

Being chemically stable, low cost and made from abundant resources, titanium dioxide (TiO) possesses the most desired advantages for photocatalytic applications. However, the intrinsic limits of high surface hydrogen adsorption energy, wide band gap, low separation rate and rapid recombination of the photogenerated charge carriers greatly hamper its utilization. To address these issues, the present work combines density functional theory (DFT) calculations with rational modifications of TiO with nickel doping and an ultra-thin shield of fluorinated carbon (FNT) for application in the photocatalytic hydrogen evolution reaction (HER).

Evaluation of Structural, Magnetic, and Electromagnetic Properties of Co-Substituted NiCuZn Ferrites.

We report citrate gel-assisted autocombusted spinel-type Co-substituted NiCuZn ferrites and their electromagnetic properties. Several complementary techniques were used to investigate the influence of Co on structural and electromagnetic properties of NiCoCuZnFeO with = 0.00-0.