Accuracy of Intraoral Scanner Systems for Fabricating Inlay, Onlay, and Veneer Restorations: A Systematic Review and Meta-Analysis.

Purpose: To evaluate the accuracy of intraoral scanners (IOSs) for fabricating inlay, onlay, and veneer restorations.

Materials And Methods: A literature search was completed in five databases: PubMed/Medline, Scopus, Embase, Web of Science, and Cochrane. A manual search was also conducted.

Accuracy of a facebow record: A comparison between a conventional facebow and a smartphone 3D scanner.

Statement Of Problem: Accurately transferring the maxillary cast to the articulator is an essential step in most prosthodontics procedures in both digital and conventional workflows. Recently, the use of a smartphone 3-dimensional (3D) scanner-based virtual facebow record has been reported, but its accuracy is unclear.

Purpose: The purpose of this clinical study was to compare the trueness and precision of a virtual facebow record made with a smartphone 3D scanner with that of a conventional facebow technique.

Parameters to Improve the Accuracy of Intraoral Scanners for Fabricating Tooth-Supported Restorations.

Objectives: To review the factors that impact the accuracy of intraoral scanners (IOSs) when fabricating tooth-supported restorations.

Overview: Factors can have a different impact on IOS accuracy depending on the scanning purpose. If the goal is to fabricate tooth-supported restorations, it is essential to review the following operator-related factors: IOS technology and system, scan extension and starting quadrant, scanning pattern, scanning distance, and rescanning methods.

Classification of Complete-Arch Implant Scanning Techniques Recorded by Using Intraoral Scanners.

Objectives: To classify the complete-arch implant scanning techniques recorded by using intraoral scanners (IOSs).

Overview: Different implant scanning techniques have been described for recording complete-arch implant scans by using IOSs. However, dental literature lacks on a classification of these implant scanning techniques.

Effect of Storage Conditions and Time on the Dimensional Stability of 3D Printed Surgical Guides: An In Vitro Study.

Purpose: To evaluate the dimensional stability over time of additively manufactured surgical templates, fabricated by different resins, and stored by different methods.

Materials And Methods: Using a 3D printer with DLS technology and two different resins (Surgical Guide (SG)-WhipMix and Key Guide (KG)-KeystoneIndustries), 96 surgical guides were additively manufactured. The guides were stored in three different environments: directly exposed to sunlight (S), in normal interior room conditions (S), and in darkness (S).

Digital analysis of fabrication accuracy and fit in additively and subtractively manufactured implant-supported fixed complete dentures.

Objectives: To digitally evaluate the trueness and fit of additively and subtractively manufactured fixed complete dentures in materials intended for definitive use.

Methods: An edentulous maxillary model with implants at the left first molar, left canine, right canine, and right first molar site was digitized and a fixed complete denture was designed. This design was used to fabricate fixed dentures in an additively manufactured resin for definitive use (AM), a high-impact polymer composite (SM-CR), and a strength gradient zirconia (SM-ZR) (n = 10).

Can nonhazardous postprocessing cleaning solutions enable adequate surface properties for printed dental casts in different resins?

Statement Of Problem: Printed casts and dental devices and prostheses are increasingly being used, and the ecological impact of additive manufacturing should be considered in addition to the fabrication accuracy and surface properties of the printed object. To overcome the ecological drawbacks of alcohol postprocessing, water-washable, 3-dimensionally (3D) printable cast resins and postprocessing cleaning solutions that do not include alcohol have been introduced. However, whether using only water rather than chemical solvents would enable the surface smoothness and hardness required for accurate diagnostic and prosthetic procedures is unknown.

Digital workflow for the fabrication of custom-fit additively manufactured sports mouthguards with balanced occlusion using an optical jaw tracking system: A dental technique.

Custom sports mouthguards are used in various sports to protect teeth, temporomandibular joints, and soft tissues from impact forces. The present article demonstrates a digital workflow to fabricate a 3-dimensionally (3D) printed individualized sports mouthguard. An optical jaw tracking system is used to record a repeatable reference position, and mandibular excursive movements to achieve a completely balanced occlusion.

Influence of apical finish line location of tooth preparations on the scanning accuracy of intraoral scanners with various focal lengths and scanning technologies.

Statement Of Problem: Limited studies have reported the influence of finish line location on the accuracy of intraoral scanners (IOSs). Focal length is a hardware characteristic of IOSs. Whether there is a relationship between scanning accuracy of tooth preparations with the finish located at different apical positions and focal length and IOS technology or system remains uncertain.

Influence of scanning pattern on accuracy, time, and number of photograms of complete-arch implant scans: A clinical study.

Objectives: To measure the influence of scanning pattern on the accuracy, time, and number of photograms of complete-arch intraoral implant scans.

Methods: A maxillary edentulous patient with 7 implants was selected. The reference implant cast was obtained using conventional methods (7Series Scanner).

Fracture resistance, marginal and internal adaptation of innovative 3D-printed graded structure crown using a 3D jet printing technology.

Purpose: This in vitro study aimed to create a graded structured dental crown using 3D printing technology and investigate the fracture resistance and the adaptation of this new design.

Materials And Methods: A dental crown with a uniform thickness of 1.5 mm was designed, and the exported stereolithography file (STL) was used to manufacture 30 crowns in three groups (n = 10), solid (SC), bilayer (BL), and multilayer (ML) crowns using  3D jet printing technology.

Discrepancies of centric occlusion located by using a conventional method and four intraoral scanners combined with a computer-aided design program: A pilot investigation.

Statement Of Problem: Intraoral scanners (IOSs) can be used to record the maxillomandibular relationship at centric relation (CR). The articulated digital scans can be imported into a dental computer-aided design (CAD) program and used to locate centric occlusion (CO); however, the accuracy of the CO recorded by using IOSs and a dental CAD program remains unknown.

Purpose: The purpose of this clinical study was to compare the position of the CO located by using a conventional method and 4 IOSs combined with a dental CAD program.

Implant-supported prostheses following the biologically oriented preparation technique (BOPT) after implantoplasty procedures: A dental technique.

Esthetic concerns may appear on implant-supported prostheses after peri-implantitis treatment, such as implantoplasty procedures that includes the thread removal and surface smoothening. A technique for restoring implants that have been treated for peri-implantitis using an implantoplasty procedure combined with the detoxification of the implant surfaces is described. The technique involves the fabrication of an implant-supported prosthesis following the biologically oriented preparation technique (BOPT) and aims to solve esthetic complications after this peri-implantitis treatment approach.

Application of CAD-CAM technology in the reconstruction of anterior teeth with implant restorations affected by growth changes in young adults: A clinical report.

Anterior implant-supported restorations can be challenging, but for a patient undergoing growth and development changes, clinical resolution becomes complex and demanding. To achieve successful outcomes, multidisciplinary dental therapy is required to manage esthetic consequences while maintaining a minimally invasive approach. This clinical report describes a comprehensive treatment protocol to address and treat growth and development complications for an implant-supported prosthesis.

Intraoral scanners as tracking devices: A dental protocol for assessing volumetric changes between intraoral scans.

Intraoral scanners (IOSs) are digital data acquisition technologies that ease the recording of virtual diagnostic casts. Some IOSs have a specific software tool to assess volumetric changes between 2 scans acquired on the patient at different times. The scans are superimposed and volumetric differences between both meshes are reported.

Demystify Treatment Planning With a Correct Functional Diagnosis.

Obtaining an accurate assessment of the causes of severe dental destruction is crucial when planning a clinical workflow for full-mouth rehabilitation cases. Some cases that initially appear extremely challenging may be surprisingly straightforward, especially if the patient presents with an acceptable functional occlusion. In the seemingly highly complex case presented, only a Lucia jig was required to obtain a reliable restorative reference point for the full-mouth rehabilitation.

Effect of 3D printer, implant analog and angulation on the accuracy of analog position in implant casts.

Objectives: To evaluate the accumulative effect of 3D printer, implant analog systems, and implant angulation on the accuracy of analog position in implant casts.

Methods: A reference cast, presenting a case of a three-unit implant-supported prosthesis, was scanned with a coordinate measurement machine, producing the first reference data set (CMM, n = 1). The second reference data set (n = 10) was prepared using an intraoral scanner (IOS) (Trios4).

Accuracy of artificial intelligence-based segmentation of the mandibular canal in CBCT.

Objectives: To investigate the accuracy of artificial intelligence (AI)-based segmentation of the mandibular canal, compared to the conventional manual tracing, implementing implant planning software.

Materials And Methods: Localization of the mandibular canals was performed for 104 randomly selected patients. A localization was performed by three experienced clinicians in order to serve as control.

Locating centric occlusion by using intraoral scanners and open access or dental computer-aided design programs: A dental technique.

When using conventional methods, centric occlusion (CO) can be determined on conventional gypsum casts that are mounted in an analog articulator at centric relation (CR). In the digital environment, intraoral scanners (IOSs) can be used to record maxillary and mandibular scans articulated in CR. However, a digital protocol to locate the CO on articulated intraoral digital scans at CR by using computer-aided design (CAD) programs is needed.

An overview of the different digital facebow methods for transferring the maxillary cast into the virtual articulator.

Objectives: The purposes of this study were to classify the described digital facebow techniques for transferring the maxillary cast into the semi-adjustable virtual articulator based on the digital data acquisition technology used and to review the reported accuracy values of the different digital facebow methods described.

Overview: Digital data acquisition technologies, including digital photographs, facial scanners, cone beam computed tomography (CBCT) imaging, and jaw tracking systems, can be used to transfer the maxillary cast into the virtual articulator. The reported techniques are reviewed, as well as the reported accuracy values of the different digital facebow methods.

Use of an optical jaw tracking system to capture the envelope of function when designing interim and definitive prostheses: A dental technique.

Jaw tracking systems can record mandibular motion for incorporation into programs used for designing dental prostheses. However, the protocol for data acquisition and design using the recorded mandibular motion is unclear. The envelope of function recorded in a patient with acceptable occlusal function provides important functional information that can be integrated into the design of dental prostheses.