High Thermal Conductive Liquid Crystal Elastomer Nanofibers.

Liquid crystal elastomers (LCEs), consisting of polymer networks and liquid crystal mesogens, show a reversible phase change under thermal stimuli. However, the kinetic performance is limited by the inherently low thermal conductivity of the polymers. Transforming amorphous bulk into a fiber enhances thermal conductivity through the alignment of polymer chains.

Bioinspired Nanolayered Structure Tuned by Extensional Stress: A Scalable Way to High-Performance Biodegradable Polyesters.

The nacre-inspired multi-nanolayer structure offers a unique combination of advanced mechanical properties, such as strength and crack tolerance, making them highly versatile for various applications. Nevertheless, a significant challenge lies in the current fabrication methods, which is difficult to create a scalable manufacturing process with precise control of hierarchical structure. In this work, a novel strategy is presented to regulate nacre-like multi-nanolayer films with the balance mechanical properties of stiffness and toughness.

MXene@c-MWCNT Adhesive Silica Nanofiber Membranes Enhancing Electromagnetic Interference Shielding and Thermal Insulation Performance in Extreme Environments.

A lightweight flexible thermally stable composite is fabricated by combining silica nanofiber membranes (SNM) with MXene@c-MWCNT hybrid film. The flexible SNM with outstanding thermal insulation are prepared from tetraethyl orthosilicate hydrolysis and condensation by electrospinning and high-temperature calcination; the MXene@c-MWCNT films are prepared by vacuum filtration technology. In particular, the SNM and MXene@c-MWCNT as one unit layer (SMC) are bonded together with 5 wt% polyvinyl alcohol (PVA) solution, which exhibits low thermal conductivity (0.

Melt stretching and quenching produce low-crystalline biodegradable poly(lactic acid) filled with β-form shish for highly improved mechanical toughness.

High-toughness biodegradable poly(lactic acid) (PLA) has always been intensively pursued on the way of replacing traditional petroleum-based plastics. Regulating microstructures to achieve self-toughening holds great promise due to avoidance of incorporating other heterogeneous components. Herein, we propose a straightforward and effective way to tailor microstructures and properties of PLA through melt-stretching and quenching of slightly crosslinked samples.

A combined melt-stretching and quenching setup for experimental studies of polymer crystallization under complex flow-temperature environments.

A combined melt-stretching and quenching setup is designed and developed to allow experimental investigations of polymer crystallization under the complex flow-temperature environments comparable to those encountered in the actual industrial processing. The melt-stretching proceeds by two drums rotating in the opposite directions with simultaneous recording of a stress-strain curve, where the Hencky strain and strain rate (≤233 s) are adjustable over a large range. After stretching, liquid N is used as a cooling medium to quench the free-standing melt, which is sprayed directly to the deformed melt driven by an electric pump.

Superhydrophobic conductive rubber band with synergistic dual conductive layer for wide-range sensitive strain sensor.

Wearable electronic devices have received increasing interests because of their excellent flexibility, stretchability, and human friendliness. As the core components, flexible strain sensors integrated with wide working range, high sensitivity, and environment stability, especially in moisture or corrosive environments, remain a huge challenge. Herein, synergistic carbon nanotubes (CNTs)/reduced graphene oxide (rGO) dual conductive layer decorated elastic rubber band (RB) was successfully developed and treated with hydrophobic fumed silica (Hf-SiO) for preparing superhydrophobic strain sensor.

Transparent, intrinsically stretchable cellulose nanofiber-mediated conductive hydrogel for strain and humidity sensing.

Conductive hydrogels (CHs) have attracted considerable attentions in the fields of wearable electronics, disease diagnosis, and artificial intelligence. However, it is still a great challenge to prepare a single CH system with integrated characteristics of high stretchability, good transparency, and multisensory function through a simple fabrication process. Herein, carboxylic cellulose nanofibers (CCNF) were used to assist the homogeneous distribution of opaque conductive poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT: PSS) into the crosslinked polyacrylamide network for the fabrication of stretchable and transparent interpenetrating network CH, aiming for a high-performance multisensory system.

Phase Engineering of Metastable Transition Metal Dichalcogenides via Ionic Liquid Assisted Synthesis.

Metallic group VIB transition metal dichalcogenides (1T-TMDs) have attracted great interest because of their outstanding performance in electrocatalysis, supercapacitors, batteries, and so on, whereas the strict fabrication conditions and thermodynamical metastability of 1T-TMDs greatly restrict their extensive applications. Therefore, it is significant to obtain stable and high-concentration 1T-TMDs in a simple and large-scale strategy. Herein, we report a facile and large-scale synthesis of high-concentration 1T-TMDs via an ionic liquid (IL) assisted hydrothermal strategy, including 1T-MoS (the obtained MoS sample was denoted as MoS-IL), 1T-WS, 1T-MoSe, and 1T-WSe.

Macro/Micro-Environment Regulating Carbon-Supported Single-Atom Catalysts for Hydrogen/Oxygen Conversion Reactions.

Single-atom catalysts (SACs) have attracted tremendous research interest due to their unique atomic structure, maximized atom utilization, and remarkable catalytic performance. Among the SACs, the carbon-supported SACs have been widely investigated due to their easily controlled properties of the carbon substrates, such as the tunable morphologies, ordered porosity, and abundant anchoring sites. The electrochemical performance of carbon-supported SACs is highly related to the morphological structure of carbon substrates (macro-environment) and the local coordination environments of center metals (micro-environment).

Variations of tunnelling resistance between CNTs with strain in composites: non-monotonicty and influencing factors.

The electro-mechanical response of conductive carbon-nanotube(CNT)-polymer composites is vital when they are used as smart-sensing materials. Clarifying the variation trend of resistance with strain is the key to design and regulate the piezoresistive property of such material. Here, we present some finite element simulations to predict the electro-mechanical response using a geometrical model comprising two hollow cylindrical CNTs and a cuboid matrix.

Interface and electronic structure engineering induced Prussian blue analogues with ultra-stable capability for aqueous NH storage.

Aqueous ammonium ion batteries (AAIBs) are considered potential energy storage solutions due to their faster kinetics, eco-friendliness, and high safety. Yet, appropriate electrode material for AAIBs is in continual investigation. Here, Prussian blue analogues (PBAs), NaNi[Fe(CN)], are applied by a covalent bond assisted engineering with polyaniline (PANI) polymerization.

Face-to-Face Assembly of Ag Nanoplates on Filter Papers for Pesticide Detection by Surface-Enhanced Raman Spectroscopy.

Surface-enhanced Raman spectroscopy (SERS) technology has been regarded as a most efficient and sensitive strategy for the detection of pollutants at ultra-low concentrations. Fabrication of SERS substrates is of key importance in obtaining the homogeneous and sensitive SERS signals. Cellulose filter papers loaded with plasmonic metal NPs are well known as cost-effective and efficient paper-based SERS substrates.

Vertically Aligned Silicon Carbide Nanowires/Boron Nitride Cellulose Aerogel Networks Enhanced Thermal Conductivity and Electromagnetic Absorbing of Epoxy Composites.

With the innovation of microelectronics technology, the heat dissipation problem inside the device will face a severe test. In this work, cellulose aerogel (CA) with highly enhanced thermal conductivity (TC) in vertical planes was successfully obtained by constructing a vertically aligned silicon carbide nanowires (SiC NWs)/boron nitride (BN) network via the ice template-assisted strategy. The unique network structure of SiC NWs connected to BN ensures that the TC of the composite in the vertical direction reaches 2.

Atomic Short-Range Order in a Cation-Deficient Perovskite Anode for Fast-Charging and Long-Life Lithium-Ion Batteries.

Perovskite-type oxides are widely used for energy conversion and storage, but their rate-inhibiting phase transition and large volume change hinder the applications of most perovskite-type oxides for high-rate electrochemical energy storage. Here, it is shown that a cation-deficient perovskite CeNb O (CNO) can store a sufficient amount of lithium at a high charge/discharge rate, even when the sizes of the synthesized particles are on the order of micrometers. At 60 C (15 A g ), corresponding to a 1 min charge, the CNO anode delivers over 52.

A Visible Light Driven Photoelectrochemical Chloramphenicol Aptasensor Based on a Gold Nanoparticle-Functionalized 3D Flower-like MoS/TiO Heterostructure.

Developing a photoactive material by combining the characteristics of a wide light response range and effective separation of photogenerated electron-hole pairs remains a huge challenge for the construction of a photoelectrochemical (PEC) sensing platform. Herein, a gold nanoparticle (AuNP)/MoS/TiO composite was prepared through the facile hydrothermal method coupled with an photoreduction technology. Benefiting from both the compositional and structure merits, the composite not only extends the absorption range to visible light but also enhances the photoelectric conversion efficiency by transferring photogenerated electrons into the conduction band of semiconductors from the plasmonic AuNP.

Controllable Synthesis of a Loofah-Like Cobalt-Nickel Selenide Network as an Efficient Electrocatalyst for the Hydrogen Evolution Reaction.

The rational design and construction of noble metal-free electrocatalysts featuring high efficiency and low cost are important for the hydrogen evolution reaction (HER). A significant development in the synthesis of a loofah-like CoNiSe architecture (expressed as CoNiSe-LN) electrocatalyst on carbon cloth through a three-step method is reported. Both the ionic liquid 1-dodecyl-3-methylimidazolium acetate (IL, [CMIm]Ac) and the molar ratio of Co to Ni play a pivotal role in the synthesis of CoNiSe-LN with 3D hierarchical architecture.

Potential metal-related strategies for prevention and treatment of COVID-19.

Abstract: The coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has posed severe threats to human health, public safety, and the global economy. Metal nutrient elements can directly or indirectly take part in human immune responses, and metal-related drugs have served as antiviral drugs and/or enzyme inhibitors for many years, providing potential solutions to the prevention and treatment of COVID-19. Metal-based drugs are currently under a variety of chemical structures and exhibit wide-range bioactivities, demonstrating irreplaceable advantages in pharmacology.

Mussel-inspired tannic acid/polyethyleneimine assembling positively-charged membranes with excellent cation permselectivity.

The extraction of valuable target ions through monovalent cation exchange membranes (MCEMs) has been increasingly attracting in modern energy and environmental fields. However, the separation performance of MCEMs in terms of the permselectivity and cation fluxes, is typically restricted by membrane architecture and applied materials. Recently, mussel-inspired surface modification methods have been deployed in new membrane fabrications with special surface characteristics and functions.

Stretchable, Sensitive Strain Sensors with a Wide Workable Range and Low Detection Limit for Wearable Electronic Skins.

With the rapid development of wearable electronics, a multifunctional and flexible strain sensor is urgently required. Even though enormous progress has been achieved in designing high-performance strain sensors, the conflict between high sensitivity and a large workable range still restricts their further advance. Herein, a "point to point" conductive network is proposed to design and fabricate a carbon black/polyaniline nanoparticles/thermoplastic polyurethane film (CPUF).

Hierarchical HCF@NC/Co Derived from Hollow Loofah Fiber Anchored with Metal-Organic Frameworks for Highly Efficient Microwave Absorption.

Hierarchical electromagnetic wave (EMW) absorption materials with a dielectric-magnetic dual-loss mechanism are promising candidates for highly efficient EMW attenuation. Herein, hierarchical dielectric-magnetic composite hollow carbon fiber@nitrogen-doped carbon/Co (HCF@NC/Co) was successfully synthesized via in situ growth of two-dimensional (2D) Co metal-organic framework (MOF) (ZIF-67) nanosheets on the surface of hollow loofah fiber (HLF), followed by a calcination process, where the aggregation of carbonized MOFs was effectively avoided to construct a homogeneous hierarchical one-dimensional structure. Based on the advantages of the carbon/Co dielectric-magnetic dual-loss mechanism that results in good impedance matching and multiple polarization loss arising from the extensive heterointerfaces (e.