Vacancy formation in a 1D chain of dust particles in a DC discharge.

The paper presents the first experimental observation of an atypical phenomena during self-organization of dust particles into a one-dimensional chain structure levitated vertically in the plasma of a DC glow discharge. Using a laser, the third (middle) dust particle was removed from the chain of five particles so that the positions of the remaining particles did not significantly change, and a vacancy occurred in the place of the removed particle. This state of the chain turned out to be very stable, which is confirmed by the observation of the subsequent exchange of places of the fourth and the fifth particles of the chain upon the action of the laser on the forth particle.

Phase-space path-integral representation of the quantum density of states: Monte Carlo simulation of strongly correlated soft-sphere fermions.

The Wigner formulation of quantum mechanics is used to derive a path-integral representation of the quantum density of states (DOS) of strongly correlated fermions in the canonical ensemble. A path-integral Monte Carlo approach for the simulation of DOS and other thermodynamic functions is suggested. The derived Wigner function in the phase space resembles the Maxwell-Boltzmann distribution but allows for quantum effects.

Engineering of graphene-based composites with hexagonal boron nitride and PEDOT:PSS for sensing applications.

A unique nanomaterial has been developed for sweat analysis, including glucose level monitoring. Simple resusable low-cost sensors from composite materials based on graphene, hexagonal boron nitride, and conductive PEDOT:PSS (poly(3,4-ethylenedioxythiophene)polystyrene sulfonate) polymer have been developed and fabricated 2D printing on flexible substrates. The sensors were tested as biosensors using different water-based solutions.

Graphene-based multifunctional humidity sensors with an ultrahigh current response.

Prospective composites, based on graphene (G) and hexagonal boron nitride (h-BN) nanoparticles, synthesized using a plasma jet and conducting polymer PEDOT:PSS, were used to create and study a set of sensors in the current study. The composites used were G:PEDOT:PSS (GPP) and G:h-BN:PEDOT:PSS (GBNPP). The PEDOT:PSS content in the composites was 10 wt%, and the ratio of G : h-BN was 1 : 1 in GBNPP.

Engineering of graphene flakes in the process of synthesis in DC plasma jets.

During the pyrolysis of hydrocarbons in helium plasma jets in a plasma-chemical reactor, graphene flakes of a different structure and resistance were obtained. The presence of hydrogen in these structures was established by physicochemical methods, and its content depends on the pressure in the plasma-chemical reactor and the composition of a plasma-forming system. In addition to hydrogen, a relatively low concentration of oxygen atoms is present in the graphene flakes.

Structural properties of a chain of dust particles in a field of external forces.

This paper presents a numerical study of the structural parameters of a one-dimensional chain of three dust particles levitating in the near-electrode layer of an rf discharge or in the stratum of a dc discharge. The model considers the motion of dust particles under the action of gravity, external electric field, the Coulomb repulsion, and the electrostatic force from the space charge surrounding the dust particles. Particular attention is paid to the effect of plasma polarization around dust particles and the wake formation under the action of the external electric field.

Graphene: Hexagonal Boron Nitride Composite Films with Low-Resistance for Flexible Electronics.

The structure and electric properties of hexagonal boron nitride (h-BN):graphene composite with additives of the conductive polymer PEDOT:PSS and ethylene glycol were examined. The graphene and h-BN flakes synthesized in plasma with nanometer sizes were used for experiments. It was found that the addition of more than 10 mass% of PEDOT:PSS to the graphene suspension or h-BN:graphene composite in combination with ethylene glycol leads to a strong decrease (4-5 orders of magnitude, in our case) in the resistance of the films created from these suspensions.

Design and commissioning of a neutron counter adapted to high-intensity laser matter interactions.

The advent of multi-PW laser facilities world-wide opens new opportunities for nuclear physics. With this perspective, we developed a neutron counter taking into account the specifics of a high-intensity laser environment. Using GEANT4 simulations and prototype testings, we report on the design of a modular neutron counter based on boron-10 enriched scintillators and a high-density polyethylene moderator.

Micron-scale phenomena observed in a turbulent laser-produced plasma.

Turbulence is ubiquitous in the universe and in fluid dynamics. It influences a wide range of high energy density systems, from inertial confinement fusion to astrophysical-object evolution. Understanding this phenomenon is crucial, however, due to limitations in experimental and numerical methods in plasma systems, a complete description of the turbulent spectrum is still lacking.

Laboratory disruption of scaled astrophysical outflows by a misaligned magnetic field.

The shaping of astrophysical outflows into bright, dense, and collimated jets due to magnetic pressure is here investigated using laboratory experiments. Here we look at the impact on jet collimation of a misalignment between the outflow, as it stems from the source, and the magnetic field. For small misalignments, a magnetic nozzle forms and redirects the outflow in a collimated jet.

Graphene Flakes for Electronic Applications: DC Plasma Jet-Assisted Synthesis.

The possibility of graphene synthesis (the bottom-up approach) in plasma and the effective control of the morphology and electrical properties of graphene-based layers were demonstrated. Graphene flakes were grown in a plasma jet generated by a direct current plasma torch with helium and argon as the plasma-forming gases. In the case of argon plasma, the synthesized graphene flakes were relatively thick (2-6 nm) and non-conductive.

On-off intermittency and hard turbulence in the flow of fluid in the magnetic field.

This work provides an analysis of experiments in which various modes of mercury flow in a constant external magnetic field were observed; we examined the temperature oscillations in the mercury flow in a heated pipe at various Reynolds and Hartmann numbers. In some modes, the temperature oscillations have specific forms of strong aperiodic "bursts" over the weak irregular background, which are specific to the developed turbulent flow. To determine the nature of these temperature oscillations and the characteristics of the fluid flow, we examined them through the apparatus of nonlinear dynamics.

Atomistic simulations of the equation of state and hybridization of liquid carbon at a temperature of 6000 K in the pressure range of 1-25 GPa.

The equation of state and the structure of liquid carbon are studied by molecular simulation. Both classical and quantum molecular dynamics (QMD) are used to calculate the equation of state and the distribution of chemical bonds at 6000 K in the pressure range 1-25 GPa. Our calculations and results of other authors show that liquid carbon has a fairly low density on the order of 1.

The detection of hepatitis c virus core antigen using afm chips with immobolized aptamers.

In the present study, the possibility of hepatitis C virus core antigen (HCVcoreAg) detection in buffer solution, using atomic force microscope chip (AFM-chip) with immobilized aptamers, has been demonstrated. The target protein was detected in 1mL of solution at concentrations from 10М to 10М. The registration of aptamer/antigen complexes on the chip surface was carried out by atomic force microscopy (AFM).

Highly sensitive protein detection by biospecific AFM-based fishing with pulsed electrical stimulation.

We report here the highly sensitive detection of protein in solution at concentrations from 10 to 10 m using the combination of atomic force microscopy (AFM) and mass spectrometry. Biospecific detection of biotinylated bovine serum albumin was carried out by fishing out the protein onto the surface of AFM chips with immobilized avidin, which determined the specificity of the analysis. Electrical stimulation was applied to enhance the fishing efficiency.

Melting in three-dimensional and two-dimensional Yukawa systems.

Solid-liquid phase transitions in three-dimensional (3D) and two-dimensional (2D) Yukawa systems were studied numerically and analytically, including the melting of the fcc and bcc 3D lattices, and of a hexagonal primitive (hp) 2D lattice. An approach is proposed for the determination of the melting lines in these systems. The suggested approach takes into account the nonlinearity (anharmonicity) of pair interaction forces and allows one to correctly predict the conditions of melting for 3D and 2D crystal systems.

Simple estimation of thermodynamic properties of Yukawa systems.

A simple analytical approach to estimate thermodynamic properties of model Yukawa systems is presented. The approach extends the traditional Debye-Hückel theory into the regime of moderate coupling and is able to qualitatively reproduce thermodynamics of Yukawa systems up to the fluid-solid phase transition. The simplistic equation of state (pressure equation) is derived and applied to the hydrodynamic description of the longitudinal waves in Yukawa fluids.

Structural properties of dense hard sphere packings.

We numerically study structural properties of mechanically stable packings of hard spheres (HS), in a wide range of packing fractions 0.53 ≤ ϕ ≤ 0.72.

Experimental demonstration of an inertial collimation mechanism in nested outflows.

Interaction between a central outflow and a surrounding wind is common in astrophysical sources powered by accretion. Understanding how the interaction might help to collimate the inner central outflow is of interest for assessing astrophysical jet formation paradigms. In this context, we studied the interaction between two nested supersonic plasma flows generated by focusing a long-pulse high-energy laser beam onto a solid target.

Dielectric function of a collisional plasma for arbitrary ionic charge.

A simple model for the dielectric function of a completely ionized plasma with an arbitrary ionic charge that is valid for long-wavelength high-frequency perturbations is derived using an approximate solution of a linearized Fokker-Planck kinetic equation for electrons with a Landau collision integral. The model accounts for both the electron-ion collisions and the collisions of the subthermal (cold) electrons with thermal ones. The relative contribution of the latter collisions to the dielectric function is treated phenomenologically, introducing some parameter ϰ that is chosen in such a way as to get a well-known expression for stationary electric conductivity in the low-frequency region and fulfill the requirement of a vanishing contribution of electron-electron collisions in the high-frequency region.

Quantum bound of the shear viscosity of a strongly coupled plasma.

String theory methods led to the hypothesis that the ratio of a shear viscosity coefficient to the volume density of entropy of any physical system has a lower bound. Systems with strong coupling have a small viscosity as compared to weakly coupled plasmas in which the viscosity is proportional to the mean free path. Here, we have estimated the fully ionized strongly coupled plasma viscosity based on the dynamic experimental data on electrical conductivity and have shown that the ratio of viscosity to entropy of the strongly coupled plasma is very close to that of the lower bound predicted by the string theory.

Mechanisms of nanoparticle formation by ultra-short laser ablation of metals in liquid environment.

Laser ablation in liquids is now commonly used to produce colloidal nanoparticles (NPs) that have found numerous applications in different areas. In experiments, NPs of different materials can be rather easily obtained by using laser systems with various pulse durations, shapes, wavelengths, and fluences. In this paper, we focus our attention on metal (gold) NPs produced by ultra-short laser pulses.

Viscosity of a strongly coupled dust component in a weakly ionized plasma.

An experimental study of the kinematic viscosity has been carried out for dust particles of size 0.95 and 3.92 μm, in weakly ionized plasma over a wide range of dust coupling parameters.

Two-phase simulation of the crystalline silicon melting line at pressures from -1 to 3 GPa.

Results of a numerical investigation of crystalline silicon melting line within the range of pressures from -1 to 3 GPa are presented. A two-phase molecular dynamics method is applied to obtain temperature, pressure, and densities of solid and liquid phases on the melting line. Using a special procedure we ensure the strict control of the two-phase equilibrium in the simulation cell.