Intelligent Transducer for Temperature Measurement with Two-Wire or Three-Wire Platinum RTD.

The article presents an intelligent temperature transducer (ITT), which can work with a two-wire or a three-wire platinum resistance temperature detector (RTD). The ITT design allowed for compensation of the RTD's lead wire resistance. The ITT used the author's auto-calibration procedure, which minimized linearity errors of the ITT and RTD processing characteristics, ITT offset and gain errors, and errors resulting from changes in the ITT operating conditions concerning the nominal conditions.

In situ Fe-doped thin carbon wires via AC high voltage arc discharge.

This study explores the controlled, continuous production of thin carbon rods between graphite electrodes (continued electrode deposits) during an arc discharge of high voltage alternating current with a frequency of 50 Hz in liquid paraffin, along with in situ doping of the resulting material using a suspension of liquid paraffin and iron powder ( <10 μm). The surface morphology of the obtained carbon rod nanomaterials was characterized using scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDX), scanning transmission electron microscopy (STEM) with EDX chemical composition analysis, X-ray microtomography (micro-CT), and atomic force microscopy (AFM). The AFM technique in scanning thermal microscopy (SThM) and conductive probe (CP) modes was employed to determine the temperature and electrical conductivity of the obtained nanostructures.

The Roles of H3K9me3 Writers, Readers, and Erasers in Cancer Immunotherapy.

The interplay between cancer and the immune system has captivated researchers for a long time. Recent developments in cancer immunotherapy have substantiated this interest with a significant benefit to cancer patients. Tumor and immune cells are regulated via a wide range of molecular mechanisms involving intricate transcriptional and epigenetic networks.

Regression Analysis and Optimum Values of Austempering Affecting Mechanical Properties of Compacted Graphite Iron.

The study examined the effect of heat treatment parameters of compacted graphite iron (CGI) on the mechanical properties of the material. The microstructure was characterized using optical microscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Three levels of heat treatment parameters were adopted considering the orthogonal test plan 2.

Enhancing High-Alloy Steel Cutting with Abrasive Water Injection Jet (AWIJ) Technology: An Approach Using the Response Surface Methodology (RSM).

The common machining technologies for difficult-to-machine materials do not remarkably ensure acceptable efficiency and precision in bulk materials cutting. High-energy abrasive water injection jet (AWIJ) treatment can cut diverse materials, even multi-layer composites characterized by divergent properties, accurately cutting complex profiles and carrying them out in special circumstances, such as underwater locations or explosion hazard areas. This work reports research on the AWIJ machining quality performance of X22CrMoV12-1 high-alloy steel.

Knowledge and attitudes towards performing resuscitation among seniors - a population-based study.

Background: Cardiac arrest constitutes a critical medical emergency necessitating swift intervention to reinstate normal heart rhythm and prevent harm to vital organs. The pivotal role of bystander cardiopulmonary resuscitation (CPR) in influencing survival rates is well recognized. With older adults being the most common group to witness such events, it's curcial to understand their attitudes and knowledge about performing CPR.

Is There a Link between Thyroid Peroxidase Gene Promoter Polymorphisms and Autoimmune Thyroiditis in the Polish Population?

(1) Autoimmune thyroiditis (AIT) is the most common cause of primary hypothyroidism and one of the most frequent organ-specific autoimmune diseases. Its pathogenesis is polygenic and still requires further research. The aim of the study was to assess, for the first time in the Caucasian population, the role of selected gene promoter polymorphisms (rs2071399 G/A, rs2071400C/T, rs2071402 A/G, and rs2071403 A/G) in the development of AIT.

Experimental Research on the Use of a Selected Multi-Criteria Method for the Cutting of Titanium Alloy with an Abrasive Water Jet.

The use of selected multi-criteria decision methods for the optimization of cutting processes by abrasive water jet methods is increasingly being used in industrial processes. This is due to the complexity of the processes and the need to reduce operating costs. Process optimization methods are available to support organizational processes including the design phase, quality assurance, production automation, and many more.

Language trees with sampled ancestors support a hybrid model for the origin of Indo-European languages.

The origins of the Indo-European language family are hotly disputed. Bayesian phylogenetic analyses of core vocabulary have produced conflicting results, with some supporting a farming expansion out of Anatolia ~9000 years before present (yr B.P.

Framework for multi-criteria assessment of classification models for the purposes of credit scoring.

The main dilemma in the case of classification tasks is to find-from among many combinations of methods, techniques and values of their parameters-such a structure of the classifier model that could achieve the best accuracy and efficiency. The aim of the article is to develop and practically verify a framework for multi-criteria evaluation of classification models for the purposes of credit scoring. The framework is based on the Multi-Criteria Decision Making (MCDM) method called PROSA (PROMETHEE for Sustainability Analysis), which brought added value to the modelling process, allowing the assessment of classifiers to include the consistency of the results obtained on the training set and the validation set, and the consistency of the classification results obtained for the data acquired in different time periods.

Assessment of the Possibility of Reducing Energy Consumption and Environmental Pollution in the Steel Wire Manufacturing Process.

This paper describes research on the influence the technology of zinc-coated steel wire manufacturing has on the energy and force parameters of the drawing process, energy consumption and zinc expenditure. In the theoretical part of the paper, the theoretical work and drawing power were calculated. Calculations of the electric energy consumption have shown that usage of the optimal wire drawing technology results in a 37% drop in energy consumption, which in the course of a single year translates to savings equal to 13 TJ.

Preliminary Studies into Cutting of a Novel Two Component 3D-Printed Stainless Steel-Polymer Composite Material by Abrasive Water Jet.

Composites are materials with a heterogeneous structure, composed of two or more components with different properties. The properties of composites are never the sum or average of the properties of their components. There is a lot of research and many models on the different property assessments of composite materials.

Application of RSM Method for Optimization of Geraniol Transformation Process in the Presence of Garnet.

This paper presents the results of tests obtained for the transformation of geraniol in the presence of garnet as a catalyst by the response surface method (RSM). The method analyzed the influence of the following parameters: a temperature of 50-150 °C, a catalyst concentration (garnet) of 1.0-10.

Correction: Naked and necked gold nanoparticles prepared by submerged alternating current arc discharge in water.

[This corrects the article DOI: 10.1039/D2RA06050G.].

Modeling employees' skills for sustainable banking services.

In Bangladesh, more clarity is needed on data that could contribute to the provision of sustainable banking services. Therefore, the qualitative exploration of bank employees' skills to advance contemporary banking careers and services has been rational. Moreover, limited knowledge of what constitutes a sustainable banking career and service inspires this study to adapt to the new normal post-COVID-19.

Necked gold nanoparticles prepared by submerged alternating current arc discharge in water.

The article presents the method of producing gold nanoparticles using a high voltage arc discharge of alternating current with a frequency of 50 Hz in distilled water. The equipment necessary to carry out the process is described, including the construction of the reactor and the power source of a very simple design necessary to generate a high-voltage arc discharge between the electrodes. Arc discharge processes were carried out two times for 2 and 5 minutes, respectively, in ambient conditions without thermostating the reactor, at medium temperature varying in the range of 25-70 °C.

The Effect of Drawing in Conventional and Hydrodynamic Dies on Structure and Corrosion Resistance of Hot-Dip Galvanized Zinc Coatings on Medium-Carbon Steel Wire.

The paper presents the impact of the drawing method on the microstructure and corrosion resistance of galvanized steel wires. The microstructural tests confirmed that, in the drawing speed range v = 5-20 m/s, the use of hydrodynamic dies creates more favorable conditions for the deformation of the soft zinc coating on the hard steel core. The increase in friction at the wire/die interface in the conventional method, as compared to the hydrodynamic method, contributed to the decrease in coating thickness and the increase in the diffusion layer, and the higher the drawing speed, the greater the differences between the analyzed drawing methods.

Efficiency of Tool Steel Cutting by Water Jet with Recycled Abrasive Materials.

High-pressure water jet machining is characterized by wide possibilities of cutting diverse materials together with multi-layer materials with dissimilar properties, accurate cutting complex profiles, as well as conducting them in uncommon conditions, especially in cases of thick materials. An additional advantage of water jet technology is its environmental friendliness. This paper presents tests of the cutting performance of tool steel with the use of an abrasive water jet (AWJ).

Conversion of Geraniol into Useful Value-Added Products in the Presence of Catalysts of Natural Origin: Diatomite and Alum.

This article presents research related to the transformation of geraniol (GA), leading to the formation of products with very valuable properties. In the planned method, heterogeneous catalysts of natural origin in the form of alum and diatomite were used as catalysts. Initially, the process which we investigated was the process of isomerization of GA, but it turned out during the studies that GA is also transformed in other reactions.

Research into the Disintegration of Abrasive Materials in the Abrasive Water Jet Machining Process.

The size and distribution of abrasive particles have a significant influence on the effectiveness of the cutting process by the high-speed abrasive water jet (AWJ). This paper deals with the disintegration intensity of abrasive materials in AWJ cutting during the creation of the abrasive jet. An evaluation of the abrasive materials was performed after forming in the cutting head was carried out and grain distribution was evaluated using the geometric and logarithmic Folk and Ward method.

Follicular thyroid cancer in a patient with Pendred syndrome.

We present the clinical and molecular studies of a family with Pendred syndrome, in which one affected individual developed follicular thyroid cancer. Two siblings with classic Pendred syndrome triad were operated on because of enormous multinodular goiter. Histopathology showed a follicular thyroid cancer in the male and a multinodular goiter in the female.

Factors Differentiating the Level of Functional Fitness in Polish Seniors.

In this study, functional fitness is defined as the level of independence and self-sufficiency of an elderly person, which facilitates leading an independent life, without the need for assistance from other people. A decrease in functional fitness among older adults is influenced by a variety of factors. In addition to changes occurring in the human body in accordance with the laws of ontogenetic development, they can also be analyzed in terms of somatic parameters and the age of the subjects.