Novel 3D composite for efficient photocatalysis in environmental remediation.

Highly porous, self-supported 3D interconnected network-based nanomaterials hold immense promise in revolutionizing the field of catalysis. These materials combine two critical features; a large accessible surface and an overall active surface that leads to substantial catalytic effects. In this study, we developed a novel class of 3D composite material composed of zinc oxide tetrapods (ZOT) and polyethylene glycol (PEG) polymer, specifically designed for photocatalysis.

Performance Optimization of a Large Geometry High Resolution-Secondary Ion Mass Spectrometer (HR-SIMS) for High Precision Measurements of Oxygen Isotopic Composition (δO) and U-Pb Geochronology in Zircon.

A large geometry high resolution secondary ion mass spectrometer (HR-SIMS) has been established as a part of the National Geochronology Facility (NGF) at Inter-University Accelerator Centre (IUAC), New Delhi. The performance of the instrument related to high spatial resolution, high mass resolving power (MRP), sensitivity of the instrument to measure low abundant isotopes, and sensitivity of the instrument for Pb signal under different conditions are optimized and presented in this paper. We report the precision of the order of ~ 0.

Unraveling the Augmented Field Emission Performance of Molybdenum Disulfide-Praseodymium Sulfide (MoS@PrS) Heterostructure: A Combined Experimental and First Principles-Based Study.

The molybdenum disulfide-praseodymium sulfide (MoS-PrS) heterojunctions are optimally synthesized through a sophisticated three-step procedure. Initially, MoS rods are synthesized using the micellar route followed by a solid-state reaction, forming well-defined structures. Subsequently, PrS nanoparticles are synthesized using the same method.

Enhanced NO Gas Sensing in Nanocrystalline MoS via Swift Heavy Ion Irradiation: An Experimental and DFT Study.

Nanostructured transition metal dichalcogenides (TMDs) like MoS hold promise for gas sensing applications due to their exceptional properties. However, limitations exist in maximizing sensor performance, such as limited active sites for gas interaction and sluggish response/recovery times. This study explores swift heavy ion (SHI) irradiation as a strategy to address these challenges in MoS-based NO gas sensors.

A sustainable bioprocess technology for producing food-flavour (+)-γ-decalactone from castor oil-derived ricinoleic acid using enzymatic activity of Candida parapsilosis: Scale-up optimization and purification using novel composite.

Ricinoleic acid (RA) from castor oil was employed in biotransformation of peach-flavoured γ-decalactone (GDL), using a Candida parapsilosis strain (MTCC13027) which was isolated from waste of pineapple crown base. Using four variables-pH, cell density, amount of RA, and temperature-the biotransformation parameters were optimized using RSM and BBD. Under optimized conditions (pH 6, 10 % of microbial cells, 10 g/L RA at 28°C), the conversion was maximum and resulted to 80 % (+)-GDL (4.

Paleoseismological evidence for segmentation of the Main Himalayan Thrust in the Darjeeling-Sikkim Himalaya.

Whether the Main Himalayan Thrust can host a single surface-rupturing event in the Himalaya with a rupture length of > 700 km remains controversial. Previous paleoseismological studies in the Darjeeling-Sikkim Himalaya (DSH) suggested medieval surface-rupturing earthquakes, correlating them with the eleventh-thirteenth century events from Nepal and Bhutan and extending the coseismic rupture length > 700 km. Conversely, there is no rupture evidence of the 1714 Bhutan and 1934 Bihar-Nepal earthquakes in the DSH, resulting in a discrepancy in the rupture extent of the great earthquakes.

Formation of partially embedded Au nanostructures: Ion beam irradiation on thin film.

The Au partially embedded nanostructure (PEN) is synthesized by ion irradiation on an Au thin film deposited on a glass substrate using a 50 keV Ar ion. Scanning electron microscopy results show ion beam-induced restructuring from irregularly shaped nanostructures (NSs) to spherical Au NSs, and further ion irradiation leads to the formation of well-separated spherical nanoparticles. Higuchi's algorithm of surface analysis is utilized to find the evolution of surface morphology with ion irradiation in terms of the Hurst exponent and fractal dimension.

Unravelling the formation of carbyne nanocrystals from graphene nanoconstrictions through the hydrothermal treatment of agro-industrial waste molasses.

The delicate synthesis of one-dimensional (1D) carbon nanostructures from two-dimensional (2D) graphene moiré layers holds tremendous interest in materials science owing to its unique physiochemical properties exhibited during the formation of hybrid configurations with sp-sp hybridization. However, the controlled synthesis of such hybrid sp-sp configurations remains highly challenging. Therefore, we employed a simple hydrothermal technique using agro-industrial waste as the carbon source to synthesize 1D carbyne nanocrystals from the nanoconstricted zones of 2D graphene moiré layers.

Investigating ripple pattern formation and damage profiles in Si and Ge induced by 100 keV Ar ion beam: a comparative study.

Desired modifications of surfaces at the nanoscale may be achieved using energetic ion beams. In the present work, a complete study of self-assembled ripple pattern fabrication on Si and Ge by 100 keV Ar ion beam bombardment is discussed. The irradiation was performed in the ion fluence range of ≈3 × 10 to 9 × 10 ions/cm and at an incident angle of θ ≈ 60° with respect to the surface normal.

Refining shape and size of silver nanoparticles using ion irradiation for enhanced and homogeneous SERS activity.

We present green synthesis of silver nanoparticles in water using unirradiated and Ag ion irradiated phytoextracts of Bergenia Ciliata leaf, Eupatorium adenophorum leaf, Rhododendron arboreum leaf and flower. The use of different plant extracts and their subsequent ion irradiation allow for successful refinement of nanoparticle size and morphology. Due to changes in reducing and capping agents the nanoparticle surface functionalization also varies which not only controls the morphology but also allows for surface oxidation and aggregation processes.

Study on damage of GdO-CeO under electronic energy loss: comparison between bulk-like and nanostructure.

To understand the physical phenomena responsible for radiation damage of the materials used in nuclear reactors, and thus study their operation life and/or efficiency, it is required to simulate the conditions by exposing the materials to energetic ions. Ceria (CeO) has been proposed as one of the inert matrices for the transmutation of minor actinides in the futuristic inert matrix fuel (IMF) concept. The inert matrix should also contain burnable poison to compensate for the initial reactivity of fuel.

mediated single step biosynthesis of gold nanoparticles by bottom-up approach and its non-antimicrobial properties.

Unlabelled: In this study, we have stated the green biosynthesis of gold nanoparticles (AuNPs) by utilizing the extract of leaves (MDL) as a reducing agent. Biosynthesized flat, thin, and single-crystalline gold nanotriangles obtained through centrifugation are then analyzed by different characterization techniques. The UV - visible absorption spectra of AuNPs exhibited maxima bands in the range of 500-590 nm, indicating a characteristic of AuNPs.

Chemical characteristics, morphology and source apportionment of PM over National Capital Region (NCR) of India.

The present study frames the physico-chemical characteristics and the source apportionment of PM over National Capital Region (NCR) of India using the receptor model's Positive Matrix Factorization (PMF) and Principal Momponent Mnalysis/Absolute Principal Component Score-Multilinear Regression (PCA/APCS-MLR). The annual average mass concentration of PM over the urban site of Faridabad, IGDTUW-Delhi and CSIR-NPL of NCR-Delhi were observed to be 195 ± 121, 275 ± 141 and 209 ± 81 µg m, respectively. Carbonaceous species (organic carbon (OC), elemental carbon (EC) and water-soluble organic carbon (WSOC)), elemental constituents (Al, Ti, Na, Mg, Cr, Mn, Fe, Cu, Zn, Br, Ba, Mo Pb) and water-soluble ionic components (F, Cl, SO, NO, NH, Na, K, Mg, Ca) of PM were entrenched to the receptor models to comprehend the possible sources of PM.

γ-Ray-Induced Photocatalytic Activity of Bi-Doped PbS toward Organic Dye Removal under Sunlight.

Photocatalysts based on semiconducting chalcogenides due to their adaptable physio-chemical characteristics are attracting attention. In this work, Bi-doped PbS (henceforth PbS:Bi) was prepared using a straightforward chemical precipitation approach, and the influence of γ-irradiation on PbS's photocatalytic ability was investigated. Synthesized samples were confirmed structurally and chemically.

Study of Ion Velocity Effect on the Band Gap of CVD-Grown Few-Layer MoS.

The present work reports on a simple chemical vapor deposition (CVD) technique that employs alkali halide (NaCl) to synthesize high-quality few-layer MoS by reducing growth temperature from 850 to 650 °C, and its ion irradiation study for band gap modification. The Raman peak position difference of A to E of ≈24.5 cm for the synthesized MoS corresponds to a few layers (<5 monolayers) of MoS on the substrate, as also confirmed by atomic force microscopy (AFM).

Addressing three-body fragmentation of methane dication using "native frames": Evidence of internal excitation in fragments.

The three body fragmentation of methane dication has been studied using the technique of cold target recoil ion momentum spectroscopy. The process is initiated by impact of energetic Ar9+ ions on neutral methane and the data is subsequently collected in coincidence with Ar8+ projectile. By analysing the dissociation channels leading to (H + H+ + CH2+) and (H + H2+ + CH+) fragments, it is concluded that these fragments are formed in a sequential manner via formation of molecular intermediates CH3+ and CH2+ respectively.

Radiocarbon (C) accelerator mass spectrometry as a convenient tool for differentiation of flavor chemicals of synthetic origin from biobased sources and their in-vivo toxicity assessment.

Plants are known to be the natural factory for the production of flavor chemicals. Essential oils comprised of aldehyde as a functional group are potent in deciphering flavor effects in beverages and fresh and prepared food products. In the majority, these are manufactured through synthetic routes, resulting in high product carbon footprints or CO equivalents in total greenhouse gas emission.

Tuning the physiochemical properties of polycaprolactone-hydroxyapatite composite films by gamma irradiation for biomedical applications.

Physiochemical properties of polycaprolactone-hydroxyapatite (PCL-HAp) composites were investigated in the pristine and after irradiation of γ rays (25, 50, 75, and 100 kGy). PCL-HAp composites were synthesized by solvent evaporation and characterized using spectroscopic methods as well as biological assays. The surface roughness (RMS) of the irradiated composite film (at 75 kGy) was 80 times higher than that of the pristine.

Spectroscopic studies of metastable tetragonal ZrO nanocrystals.

This study delves into an examination of the structural and luminescent properties of zirconium dioxide (ZrO) synthesized via the solid-state combustion method. Nitrates are harnessed as the oxidizing agent, while glycine serves as the fuel. Two distinct compositions are explored: a stoichiometric 1:1 ratio and a fuel-enriched 1:2 ratio.

A versatile 4 K insert for characterization of the superconducting joints.

A multi-coil superconducting magnet is the heart of any modern Magnetic Resonance Imaging (MRI) scanner. The superconducting magnet in MRI produces a highly homogeneous field (±5 ppm) and stable field (<0.1 ppm/h) in its imaging volume.

Investigating the thermal stability of ultra-small Ag, Au and AuAg alloy nanoparticles embedded in a silica matrix.

Thermal growth kinetics of embedded bimetallic (AuAg/SiO) nanoparticles are explored and compared with their monometallic (Au/SiO and Ag/SiO) counterparts, as their practical applicability demands stability and uniformity. The plasmonic properties of these nanoparticles (NPs) significantly improve when their size falls in the ultra-small region (diameter < 10 nm), owing to their large active surface area. Interestingly, the bimetallic NPs exhibit better optical properties and structural stability as compared to their monometallic counterparts.

Physical properties and photocatalytic activity of Cr-doped TiO nanoparticles.

Nanocrystalline Ti Cr O (0 ≤ x ≤ 0.20) samples were synthesised via acid-modified sol-gel process and characterised with various techniques, such as HRTEM, FESEM, Raman, XPS, DTA and VSM. The TEM image of TiO exhibits elongated nanoparticles with an average size of 10 nm.

Fabrication of thin Molybdenum backed target using rolling method.

A successful attempt was made to fabricate a thin foil of natural Mo target on a thick Au backing with Indium in between to improve adhesion between the foils. Rolling at elevated temperature was considered to fabricate Mo foil while gold foil was fabricated employing conventional rolling technique. The heating of Mo foil under natural environment lead to the oxidation or carbonization on foil surface which was confirmed through Energy Dispersive X-ray Spectroscopy (EDS) measurements.