The Influence of Mixing Speed on the Physicomechanical Parameters of Polyaddition Poly(dimethylsiloxanes) with Fillers.

In this article, we present an analysis of the properties of polyaddition poly(dimethylsiloxanes) (PDMS) and their potential applications after modification. The focus is on understanding how different fillers and mixing speeds affect the mechanical and electrical properties of PDMS, as well as the benefits and challenges associated with these modifications. Additionally, the prospects for future development of PDMS-based technologies, which could bring significant innovations in various industrial fields, are discussed.

Degradation Mechanisms of Mortar and Plaster Layers.

This article presents a case of complex investigation of defects of lime mortar and plaster that have been developing over a period of 48 years in a house in Prague and are strongly influenced by thermal and salt crystallization cycles. The aim of this research was to describe the degradation phenomena of mortars and plasters observed on a narrowly limited part of the building, combining structural elements of different types and ages and to explain the mechanisms of their formation and development. The geometric characteristics of the defects were determined by non-destructive methods, especially optical interference moiré, laser profilometry, photogrammetry, and infrared thermography.

Microcrack and Porosity Development in Sealed Cement Mortars Measured with Micro-Computed Tomography.

For the first time, this paper explores the role of hydration kinetics on microcrack development in cement mortars using the μ-CT technique with a resolution of 2.2 µm. Three binders were tested: fine-grained ordinary Portland cement (OPC) with Blaine fineness of 391 m/kg, coarse-grained OPC made from the same clinker with Blaine fineness of 273 m/kg, and H-cement as a representative of the alkali-activated binder.

Polyetheretherketone bioactivity induced by farringtonite.

Polyetheretherketone (PEEK) is considered as an excellent biomaterial for bone grafting and connective tissue replacement. The clinical potential is, however, limited by its bioinertness, poor osteoconduction, and weak antibacterial activity. These disadvantages can be overcome by introducing suitable additives to produce mineral-polymer composites or coatings.

Toxic metals in cyanobacterial mat of Big Lachman Lake, James Ross Island, Antarctica.

The northern part of James Ross Island is the largest deglaciated area in the Antarctic Peninsula region with a unique ecosystem created during the Late Glacial. This research aims to evaluate the degree of contamination of the locality with toxic metals (As, Hg, Cd, and Pb) through bioindicators in the aquatic environment-colonies of cyanobacteria and algae. For this purpose, bottom lake sediments of Big Lachman Lake were studied for contents of Fe, As, Hg, Cd, Pb, Cr, Co, Ni, Cu, and Zn, as well as samples of cyanobacterial mat, in which Fe, As, Hg, Cd, and Pb were determined.

The Molecular Basis for Selectivity of the Cytotoxic Response of Lung Adenocarcinoma Cells to Cold Atmospheric Plasma.

The interaction of cold atmospheric plasma (CAP) with biotargets is accompanied by chemical reactions on their surfaces and insides, and it has great potential as an anticancer approach. This study discovers the molecular mechanisms that may explain the selective death of tumor cells under CAP exposure. To reach this goal, the transcriptional response to CAP treatment was analyzed in A549 lung adenocarcinoma cells and in lung-fibroblast Wi-38 cells.

Analysis of Thermal Aging Influence on Selected Physical and Mechanical Characteristics of Polyaddition and Polycondensation Poly(dimethylsiloxane).

The aim of the study was to determine the effect of accelerated thermal aging on the properties of selected poly(dimethylsiloxanes) (PDMS) differing in viscosity and hardness. This was related to the potential application for specialist casting molds with complex geometry. Four polyaddition silicones and two polycondensation ones were selected.

A study on the vertebral column of the dice snake Natrix tessellata (Serpentes, Natricidae) from Denizli (western Anatolia, Turkey).

The vertebral anatomy of snakes has attracted the attention of researchers for decades and numerous studies have been made for extinct and extant species. The present study investigated the morphological variations in vertebral structure among different vertebral regions in the dice snake Natrix tessellata, and provides a detailed anatomical and microstructural description of the vertebral column. Vertebrae were analyzed and compared using x-ray imaging, scanning electron microscopy, micro-computed tomography, and histological techniques.

Synthesis of Tungsten Carbides in a Copper Matrix by Spark Plasma Sintering: Microstructure Formation Mechanisms and Properties of the Consolidated Materials.

In this study, the synthesis of tungsten carbides in a copper matrix by spark plasma sintering (SPS) is conducted and the microstructure formation mechanisms of the composite materials are investigated. The reaction mixtures were prepared by the high-energy mechanical milling (MM) of W, C and Cu powders. The influence of the MM time and SPS temperature on the tungsten carbide synthesis in an inert copper matrix was analyzed.

Influence of Single-Wall Carbon Nanotube Suspension on the Mechanical Properties of Polymeric Films and Electrospun Scaffolds.

Carbon nanotubes (CNTs) are used in applications ranging from electrical engineering to medical device manufacturing. It is well known that the addition of nanotubes can influence the mechanical properties of various industrial materials, including plastics. Electrospinning is a popular method for fabricating nanomaterials, widely suggested for polymer scaffold manufacturing.

A collection of three-dimensional datasets of hydrating cement paste.

This dataset contains a collection of digitized three-dimensional hardened cement paste microstructures obtained from X-ray micro-computed tomography. Four sets of ordinary Portland cement-based pastes were produced and X-ray screened, varying in the initial water-to-cement ratio (wcr=0.35 and 0.

Investigation of the Resistance to High-Speed Impact Loads of a Heterogeneous Materials Reinforced with Silicon Carbide Fibers and Powder.

Pioneering studies on the additive manufacturing of a cermet heterogeneous material using SiC ceramic fiber were carried out. Unique studies of the damage staging (cratering) and the transition to the destruction of the formed material during high-speed impact created with the help of an electrodynamic mass accelerator have been carried out. It has been shown that the use of ceramic fiber in a metal matrix reduces the impact crater depth by 22% compared to material with ceramic particles.

Chloroquine Enhances Death in Lung Adenocarcinoma A549 Cells Exposed to Cold Atmospheric Plasma Jet.

Cold atmospheric plasma (CAP) is an intensively-studied approach for the treatment of malignant neoplasms. Various active oxygen and nitrogen compounds are believed to be the main cytotoxic effectors on biotargets; however, the comprehensive mechanism of CAP interaction with living cells and tissues remains elusive. In this study, we experimentally determined the optimal discharge regime (or semi-selective regime) for the direct CAP jet treatment of cancer cells, under which lung adenocarcinoma A549, A427 and NCI-H23 cells demonstrated substantial suppression of viability, coupled with a weak viability decrease of healthy lung fibroblasts Wi-38 and MRC-5.

A Multianalytical Approach for the Characterisation of Materials on Selected Artworks by Monogrammist IP.

This paper presents an investigation of wooden artworks from the collection of the National Gallery Prague created by Monogrammist IP-one of the top carvers of the Salzburg-Passau region at the beginning of the 16th century. His wood reliefs were examined to gain a better understanding of the historical techniques used in medieval art workshops. The internal structure of the small relief Visitation was analysed using computed tomography.

A Novel Laser-Based Zebrafish Model for Studying Traumatic Brain Injury and Its Molecular Targets.

Traumatic brain injury (TBI) is a major public health problem. Here, we developed a novel model of non-invasive TBI induced by laser irradiation in the telencephalon of adult zebrafish (Danio rerio) and assessed their behavior and neuromorphology to validate the model and evaluate potential targets for neuroreparative treatment. Overall, TBI induced hypolocomotion and anxiety-like behavior in the novel tank test, strikingly recapitulating responses in mammalian TBI models, hence supporting the face validity of our model.

RADIOCARBON DATING OF CHARCOALS FROM HISTORICAL MORTARS FROM TÝŘOV AND PYŠOLEC CASTLES.

Organic inclusions in lime binders provide useful samples for radiocarbon dating of historical objects. Two Czech castles Týřov and Pyšolec from Late Middle Ages were explored, and tens of charcoals were found in their walls. The radiocarbon content of the charcoals was measured with accelerator mass spectrometry.

Sculpting the Glauberg "prince". A traceological research of the Celtic sculpture and related fragments from the Glauberg (Hesse, Germany).

Article presents the results of a complex traceological research of the famous statue of the "prince"of Glauberg, found in an Early La Tène funeral complex in Glauberg (Hesse). Research focused also on two other fragments of related sandstone sculptures, found together with the Glauberger prince. The sandstone "prince"of Glauberg was already in the past a subject of many archaeological studies.

A Feasibility Study of High-Entropy Alloy Coating Deposition by Detonation Spraying Combined with Laser Melting.

In this work, a new two-stage approach to the deposition of high-entropy alloy coatings is proposed. At the first stage, a composite precursor coating is formed by detonation spraying of the metal powder mixtures. At the second stage, the precursor coating is re-melted by a laser, and the formation of multi-component solid solution phases can be expected upon solidification.

Effect of nanodisperse powders on the spreading and crystallization of a metal drop on a porous substrate.

The influence of modifying nanopowders on the spreading and crystallization of a nickel droplet on a porous steel substrate is analyzed. For this purpose, a model has been developed for the spreading of a drop of liquid metal after its high-speed collision with a heated porous substrate. Due to the high impact velocity, the process of metal crystallization is considered after the complete spreading of the drop using the model of heterogeneous nucleation and macroscopic growth of the solid phase, taking into account the size and capillary effects.

C, Al and Si NMR Investigation of the Hydration Kinetics of Portland-Limestone Cement Pastes Containing CH-COO-R (R=H or Na) Additives.

The hydration kinetics of Portland-limestone cement pastes with organic additives in the form of acetic acid and sodium acetate were studied by using solid-state C, Al and Si NMR spectroscopy. The evolution of the relative content of various phases was monitored over the period of one month: amorphous and crystalline calcite (in C spectra), ettringite, aluminum in C-S-H gel, calcium aluminates and calcium hydroaluminates (in Al spectra), as well as alite, belite and silicon in C-S-H gel (in Si spectra). The retarding effect of the additives on cement hydration at early age was demonstrated.

Strain Rate-Dependent Compressive Properties of Bulk Cylindrical 3D-Printed Samples from 316L Stainless Steel.

The main aim of the study was to analyse the strain rate sensitivity of the compressive deformation response in bulk 3D-printed samples from 316L stainless steel according to the printing orientation. The laser powder bed fusion (LPBF) method of metal additive manufacturing was utilised for the production of the samples with three different printing orientations: 0∘, 45∘, and 90∘. The specimens were experimentally investigated during uni-axial quasi-static and dynamic loading.

CaCO Polymorphs Used as Additives in Filament Production for 3D Printing.

Nowadays, additive manufacturing-also called 3D printing-represents a well-established technology in the field of the processing of various types of materials manufacturing products used in many industrial sectors. The most common type of 3D printing uses the fused filament fabrication (FFF) method, in which materials based on thermoplastics or elastomers are processed into filaments. Much effort was dedicated to improving the properties and processing of such printed filaments, and various types of inorganic and organic additives have been found to play a beneficial role.

Fast 4D On-the-Fly Tomography for Observation of Advanced Pore Morphology (APM) Foam Elements Subjected to Compressive Loading.

Observation of dynamic testing by means of X-ray computed tomography (CT) and in-situ loading devices has proven its importance in material analysis already, yielding detailed 3D information on the internal structure of the object of interest and its changes during the experiment. However, the acquisition of the tomographic projections is, in general, a time-consuming task. The standard method for such experiments is the time-lapse CT, where the loading is suspended for the CT scan.

Lightweight Concretes with Improved Water and Water Vapor Transport for Remediation of Damp Induced Buildings.

Most of the historical and old building stock in Europe are constructed from masonry, when brick, stones, or their combination are bound with traditional mortars. Rising damp, due to accompanying effects, is the main factor influencing the quality of indoor climate as well as having an important impact on the durability of masonry structures. In this study, new types of lightweight concrete with waste aggregate content as a suitable material for remediation of damp damaged masonries were designed and tested.