Flexible Electronics: Theoretical and Experimental Studies of Epidermal Heat Flux Sensors for Measurements of Core Body Temperature (Adv. Healthcare Mater. 1/2016).

On page 119, J. A. Rogers and co-workers present theoretical approaches, modeling algorithms, materials, and device designs for the noninvasive measurement of core body temperature by using multiple differential temperature sensors that attach softly and intimately onto the surface of the skin.

Buckling Behavior of Substrate Supported Graphene Sheets.

The buckling of graphene sheets on substrates can significantly degrade their performance in materials and devices. Therefore, a systematic investigation on the buckling behavior of monolayer graphene sheet/substrate systems is carried out in this paper by both molecular mechanics simulations and theoretical analysis. From 70 simulation cases of simple-supported graphene sheets with different sizes under uniaxial compression, two different buckling modes are investigated and revealed to be dominated by the graphene size.

Ultrathin Injectable Sensors of Temperature, Thermal Conductivity, and Heat Capacity for Cardiac Ablation Monitoring.

Knowledge of the distributions of temperature in cardiac tissue during and after ablation is important in advancing a basic understanding of this process, and for improving its efficacy in treating arrhythmias. Technologies that enable real-time temperature detection and thermal characterization in the transmural direction can help to predict the depths and sizes of lesion that form. Herein, materials and designs for an injectable device platform that supports precision sensors of temperature and thermal transport properties distributed along the length of an ultrathin and flexible needle-type polymer substrate are introduced.

Structural and mechanical implications of PMMA implant shape and interface geometry in cranioplasty--A finite element study.

This computational study investigates the effect of shape (defect contour curvature) and bone-implant interface (osteotomy angle) on the stress distribution within PMMA skull implants. Using finite element methodology, 15 configurations--combinations of simplified synthetic geometric shapes (circular, square, triangular, irregular) and interface angulations--were simulated under 50N static loads. Furthermore, the implant fixation devices were modelled and analysed in detail.

Biomechanical rupture risk assessment of abdominal aortic aneurysms based on a novel probabilistic rupture risk index.

A rupture risk assessment is critical to the clinical treatment of abdominal aortic aneurysm (AAA) patients. The biomechanical AAA rupture risk assessment quantitatively integrates many known AAA rupture risk factors but the variability of risk predictions due to model input uncertainties remains a challenging limitation. This study derives a probabilistic rupture risk index (PRRI).

Epidermal devices for noninvasive, precise, and continuous mapping of macrovascular and microvascular blood flow.

Continuous monitoring of variations in blood flow is vital in assessing the status of microvascular and macrovascular beds for a wide range of clinical and research scenarios. Although a variety of techniques exist, most require complete immobilization of the subject, thereby limiting their utility to hospital or clinical settings. Those that can be rendered in wearable formats suffer from limited accuracy, motion artifacts, and other shortcomings that follow from an inability to achieve intimate, noninvasive mechanical linkage of sensors with the surface of the skin.

A threshold of mechanical strain intensity for the direct activation of osteoblast function exists in a murine maxilla loading model.

The response to the mechanical loading of bone tissue has been extensively investigated; however, precisely how much strain intensity is necessary to promote bone formation remains unclear. Combination studies utilizing histomorphometric and numerical analyses were performed using the established murine maxilla loading model to clarify the threshold of mechanical strain needed to accelerate bone formation activity. For 7 days, 191 kPa loading stimulation for 30 min/day was applied to C57BL/6J mice.

High Fidelity Tape Transfer Printing Based On Chemically Induced Adhesive Strength Modulation.

Transfer printing, a two-step process (i.e. picking up and printing) for heterogeneous integration, has been widely exploited for the fabrication of functional electronics system.

Poisson׳s ratio of arterial wall - Inconsistency of constitutive models with experimental data.

Poisson׳s ratio of fibrous soft tissues is analyzed in this paper on the basis of constitutive models and experimental data. Three different up-to-date constitutive models accounting for the dispersion of fibre orientations are analyzed. Their predictions of the anisotropic Poisson׳s ratios are investigated under finite strain conditions together with the effects of specific orientation distribution functions and of other parameters.

Biomechanical Testing of Spinal Segment Fixed by Arcofix System on the Swine Spine.

Study Design: An in vitro biomechanical study.

Purpose: To evaluate the mechanical properties of the spinal segment in the intact, injured, and stabilized state after fixation by an Arcofix implant.

Overview Of Literature: Several types of thoracolumbar spine injury necessitates anterior instrumentation.

Novel microstructural findings in M. plantaris and their impact during active and passive loading at the macro level.

There are several studies dealing with experimental and structural analyses of skeletal muscles that are aimed at gaining a better understanding of three-dimensional muscle deformation and force generation. A variety of these contributions have performed structural or mechanical analyses, but very few have combined these approaches at different levels. To fill this gap, the present study aims to bring together three-dimensional micro-structural and mechanical findings in rabbit M.

Three-Dimensional Muscle Architecture and Comprehensive Dynamic Properties of Rabbit Gastrocnemius, Plantaris and Soleus: Input for Simulation Studies.

The vastly increasing number of neuro-muscular simulation studies (with increasing numbers of muscles used per simulation) is in sharp contrast to a narrow database of necessary muscle parameters. Simulation results depend heavily on rough parameter estimates often obtained by scaling of one muscle parameter set. However, in vivo muscles differ in their individual properties and architecture.

Theoretical and Experimental Studies of Epidermal Heat Flux Sensors for Measurements of Core Body Temperature.

Long-term, continuous measurement of core body temperature is of high interest, due to the widespread use of this parameter as a key biomedical signal for clinical judgment and patient management. Traditional approaches rely on devices or instruments in rigid and planar forms, not readily amenable to intimate or conformable integration with soft, curvilinear, time-dynamic, surfaces of the skin. Here, materials and mechanics designs for differential temperature sensors are presented which can attach softly and reversibly onto the skin surface, and also sustain high levels of deformation (e.

Tissue-scale anisotropy and compressibility of tendon in semi-confined compression tests.

In this study, porcine tendon tissue was tested with a dedicated semi-confined compression set-up that enables us to induce states of either fibrils in compression (mode I), tension (mode II) or at constant length (mode III), respectively. The results suggest that tendon tissue is compressible and demonstrates a significantly stiffer response in mode I than in mode III. This implies that the fibril direction remains the axis of transverse isotropy in compression and that it provides an anisotropic contribution to the tissue stress.

Influence of chronic back pain on kinematic reactions to unpredictable arm pulls.

Background: There is evidence that muscle reflexes are delayed in patients with chronic low back pain in response to perturbations. It is still unrevealed whether these delays accompanied by an altered kinematic or compensated by adaption of other muscle parameters. The aim of this study was to investigate whether chronic low back pain patients show an altered kinematic reaction and if such data are reliable for the classification of chronic low back pain.

Biomechanical Dynamics of Cranial Sutures during Simulated Impulsive Loading.

Background. Cranial sutures are deformable joints between the bones of the skull, bridged by collagen fibres. They function to hold the bones of the skull together while allowing for mechanical stress transmission and deformation.

Assessing the potential risk of rupture of abdominal aortic aneurysms.

Abdominal aortic aneurysms (AAAs) involve complex interplays between inflammatory and biomechanical factors that can be elucidated with anatomical and functional imaging. Although AAA size has been well-established in the literature to correlate with risk of rupture (and subsequent need for vascular intervention), there are other less-well-known characteristics about AAAs that also contribute to higher risk of rupture. This review focuses on biomechanical, radiological, and epidemiological characteristics of AAAs that are associated with higher rupture risk.

Finite element analysis of dental implant loading on atrophic and non-atrophic cancellous and cortical mandibular bone - a feasibility study.

The first aim of this study was to assess displacements and micro-strain induced on different grades of atrophic cortical and trabecular mandibular bone by axially loaded dental implants using finite element analysis (FEA). The second aim was to assess the micro-strain induced by different implant geometries and the levels of bone-to-implant contact (BIC) on the surrounding bone. Six mandibular bone segments demonstrating different grades of mandibular bone atrophy and various bone volume fractions (from 0.

Structure-based constitutive model can accurately predict planar biaxial properties of aortic wall tissue.

Structure-based constitutive models might help in exploring mechanisms by which arterial wall histology is linked to wall mechanics. This study aims to validate a recently proposed structure-based constitutive model. Specifically, the model's ability to predict mechanical biaxial response of porcine aortic tissue with predefined collagen structure was tested.

Vertical adaptation of the center of mass in human running on uneven ground.

In running we are frequently confronted with different kinds of disturbances. Some require quick reactions and adaptations while others, like moderate changes in ground level, can be compensated passively. Monitoring the kinematics of the runner's center of mass (CoM) in such situations can reveal what global locomotion control strategies humans use and can help to distinguish between active and passive compensation methods.

Strain measurement of objects subjected to aerodynamic heating using digital image correlation: experimental design and preliminary results.

In thermomechanical testing of hypersonic materials and structures, direct observation and quantitative strain measurement of the front surface of a test specimen directly exposed to severe aerodynamic heating has been considered as a very challenging task. In this work, a novel quartz infrared heating device with an observation window is designed to reproduce the transient thermal environment experienced by hypersonic vehicles. The specially designed experimental system allows the capture of test article's surface images at various temperatures using an optical system outfitted with a bandpass filter.

Comparison of constitutive models of arterial layers with distributed collagen fibre orientations.

Several constitutive models have been proposed for description of mechanical behaviour of soft tissues containing collagen fibres. The model with aligned fibres is modified in this paper to take the dispersion of fibre orientations into account through angular integration and it is compared with the model that is defined through generalized structure tensor. The paper is focused on the effect of fibre dispersion on the resulting stress-strain behaviour predicted by both models analyzed.

Simulation of the tensile properties of silica aerogels: the effects of cluster structure and primary particle size.

A new two-level model is proposed to investigate the relationship between the mechanical properties and microstructure of silica aerogels. This two-level model consists of the particle-particle interaction model and the cluster structure model. The particle-particle interaction model is proposed to describe interactions between primary particles, in which the polymerization reaction between primary particles is considered.

Effect of heavy-ion beam irradiation on the level of serum soluble interleukin-2 receptors in hamster cheek pouch carcinoma model.

Soluble interleukin-2 receptor (sIL-2R) is a glycoprotein derived from α chain of interleukin 2 receptors of mononuclear as well as T-cell membranes. The aims of this study were to detect the changes of serum soluble interleukin-2 receptor (sIL-2R) levels following heavy-ion beam irradiation in the hamster model with cheek pouch carcinoma, as well as to examine the impact of immune status of the hamster cheek pouch carcinoma model using heavy-ion beam irradiation. sIL-2R serum levels were detected by radioimmunoassay (RIA) in 40 hamsters bearing cheek pouch carcinoma prior to and following exposure to heavy-ion beam irradiation, and 8 normal animals served as the control.

New concept in durability improvement of hip total joint endoprostheses.

Starting from the well-known fact that the rolling movement always has a lower friction compared to sliding friction, the authors have conceived and realized a pivoting movement joint on a "layer of balls" with "compensation space", placed between the acetabular cup and the femoral head. This technical solution allows free self-directed migration of the balls, depending on the resistance opposed, with successive occupation of the "compensation space". As a concept, the proposed technical solution excludes the existence of a cage for maintaining the relative positions of the spheres.