High-Performance Advanced Composites in Multifunctional Material Design: State of the Art, Challenges, and Future Directions.

This review examines high-performance advanced composites (HPACs) for lightweight, high-strength, and multi-functional applications. Fiber-reinforced composites, particularly those utilizing carbon, glass, aramid, and nanofibers, are highlighted for their exceptional mechanical, thermal, and environmental properties. These materials enable diverse applications, including in the aerospace, automotive, energy, and defense sectors.

The finger-ring test as an indicator of muscle mass estimated by dual-energy X-ray absorptiometry in an adult community-dwelling population.

Introduction: The finger-ring test (FRT) offers a simple method to screen older adults at increased risk of sarcopenia.

Objective: To investigate the association between the FRT and lean soft tissue mass estimated by dual-energy X-ray absorptiometry (DXA), and to further elucidate the FRT as an indicator of muscle mass, while accounting for potential confounders, in a community-dwelling population.

Materials And Methods: Within this cross-sectional study 430 community-dwelling individuals aged 18 to 79 (286 women (66.

Life cycle assessment and cost analysis of innovative agar extraction technologies from red seaweeds.

Developing efficient and sustainable extraction technologies for valuable biocompounds from seaweed is crucial to overcome the limitations of conventional technologies. This study aims to compare three innovative technologies for agar extraction from two red seaweed species, G. sesquipedale and G.

Smart Carbon Fiber-Reinforced Polymer Composites for Damage Sensing and On-Line Structural Health Monitoring Applications.

High electrical conductivity, along with high piezoresistive sensitivity and stretchability, are crucial for designing and developing nanocomposite strain sensors for damage sensing and on-line structural health monitoring of smart carbon fiber-reinforced polymer (CFRP) composites. In this study, the influence of the geometric features and loadings of carbon-based nanomaterials, including reduced graphene oxide (rGO) or carbon nanofibers (CNFs), on the tunable strain-sensing capabilities of epoxy-based nanocomposites was investigated. This work revealed distinct strain-sensing behavior and sensitivities (gauge factor, GF) depending on both factors.

The Relevance of Plant-Based Diets and Micronutrient Supplementation for Body Composition: Data from the VeggieNutri Cross-Sectional Study.

Objectives: This study aimed to compare the anthropometry and body composition of vegetarian and omnivorous adults living in Portugal, while exploring nutritional and health parameters underlying observed differences.

Methods: 425 omnivorous (OMNI), lacto-ovo-vegetarian (LOV), or vegan (VEG) healthy adults were recruited. Anthropometry was measured, and bioelectrical impedance analysis was performed.

Relationship between Food Habits, Nutritional Status, and Hormone Therapy among Transgender Adults: A Systematic Review.

: The current gender-specific nutritional assessment methods for the transgender population may not cover the unique physiological characteristics of the gender transition process. Considering the potential effects of hormone therapy (HT), it has become relevant to review current evidence on the nutritional status of the transgender population. This systematic review aims to provide an updated report of the characteristics of the nutritional status, including food habits, and eating disorders in transgender individuals undergoing HT.

Kinematical Effects of a Mandibular Advancement Occlusal Splint on Running until Exhaustion at Severe Intensity.

The effects of occlusal splints on sport performance have already been studied, although their biomechanical impacts are often overlooked. We investigated the kinematical changes during running until exhaustion at severe intensity while wearing a mandibular advancement occlusal splint. Twelve trained runners completed (i) an incremental protocol on a track to determine their velocity corresponding to maximal oxygen uptake and (ii) two trials of square wave transition exercises at their velocity corresponding to maximal oxygen until exhaustion, wearing two occlusal splints (without and with mandibular advancement).

Multiscale Analysis of Sandwich Beams with Polyurethane Foam Core: A Comparative Study of Finite Element Methods and Radial Point Interpolation Method.

This study presents a comprehensive multiscale analysis of sandwich beams with a polyurethane foam (PUF) core, delivering a numerical comparison between finite element methods (FEMs) and a meshless method: the radial point interpolation method (RPIM). This work aims to combine RPIM with homogenisation techniques for multiscale analysis, being divided in two phases. In the first phase, bulk PUF material was modified by incorporating circular holes to create PUFs with varying volume fractions.

Calibration and Modeling of the Semmes-Weinstein Monofilament for Diabetic Foot Management.

Diabetic foot is a serious complication that poses significant risks for diabetic patients. The resulting reduction in protective sensitivity in the plantar region requires early detection to prevent ulceration and ultimately amputation. The primary method employed for evaluating this sensitivity loss is the 10 gf Semmes-Weinstein monofilament test, commonly used as a first-line procedure.

Changing the Mandibular Position in Rowing: A Brief Report of a World-Class Rower.

We investigated the acute biophysical responses of changing the mandibular position during a rowing incremental protocol. A World-class 37-year-old male rower performed two 7 × 3 min ergometer rowing trials, once with no intraoral splint (control) and the other with a mandibular forward repositioning splint (splint condition). Ventilatory, kinematics and body electromyography were evaluated and compared between trials (paired samples -test, ≤ 0.

Ventilatory and Perceived Ergogenic Effects of Mandibular Forward Repositioning During Running at Maximal Oxygen Uptake Intensity.

Cardoso, F, Costa, MJ, Colaço, P, Vilas-Boas, JP, Pinho, JC, Pyne, DB, and Fernandes, RJ. Ventilatory and perceived ergogenic effects of mandibular forward repositioning during running at maximal oxygen uptake intensity. J Strength Cond Res 39(1): e13-e19, 2025-Wearing an intraoral dental splint may enhance ventilatory function and exercise performance.

Patient-specific surrogate model to predict pelvic floor dynamics during vaginal delivery.

Childbirth is a challenging event that can lead to long-term consequences such as prolapse or incontinence. While computational models are widely used to mimic vaginal delivery, their integration into clinical practice is hindered by time constraints. The primary goal of this study is to introduce an artificial intelligence pipeline that leverages patient-specific surrogate modeling to predict pelvic floor injuries during vaginal delivery.

Exploring Bio-Based Polyurethane Adhesives for Eco-Friendly Structural Applications: An Experimental and Numerical Study.

In response to heightened environmental awareness, various industries, including the civil and automotive sector, are contemplating a shift towards the utilization of more sustainable materials. For adhesive bonding, this necessitates the exploration of materials derived from renewable sources, commonly denoted as bio-adhesives. This study focuses on a bio-adhesive L-joint, which is a commonly employed configuration in the automotive sector for creating bonded structural components with significant bending stiffness.

A review of computational methodologies to predict the fractional flow reserve in coronary arteries with stenosis.

Computational methodologies for predicting the fractional flow reserve (FFR) in coronary arteries with stenosis have gained significant attention due to their potential impact on healthcare outcomes. Coronary artery disease is a leading cause of mortality worldwide, prompting the need for accurate diagnostic and treatment approaches. The use of medical image-based anatomical vascular geometries in computational fluid dynamics (CFD) simulations to evaluate the hemodynamics has emerged as a promising tool in the medical field.

Fracture Analysis of Highly Flexible Adhesives: Cohesive Zone Modelling across a Wide Spectrum of Temperatures and Strain Rates.

This study focuses on the prediction of the fracture mechanics behaviour of a highly flexible adhesive (with a tensile elongation of 90%), since this type of adhesive is becoming widely used in automotive structures due to their high elongation at break and damping capacity. Despite their extensive applications, the understanding of their fracture mechanics behaviour under varying loading rates and temperatures remains limited in the literature. In addition, current prediction models are also unable to accurately predict their behaviour due to the complex failure mechanism that such bonded joints have.

Predicting the Adhesive Layer Thickness in Hybrid Joints Involving Pre-Tensioned Bolts.

While most academic studies focus on the properties of cured joints, this research addresses the manufacturing process of hybrid joints in their uncured state. Hybrid joints that combine adhesive bonding with pre-tensioned bolts exhibit superior mechanical performance compared to exclusively bonded or bolted joints. However, the adhesive flow during manufacturing in hybrid joints often results in a nonuniform adhesive thickness, where obtaining an exact thickness is crucial for accurate load capacity predictions.

Design, Manufacturing, and Evaluation of Race and Automotive Prototypal Components Fabricated with Modified Carbon Fibres and Resin.

This study explores the enhancement of Carbon Fibre Reinforced Polymers (CFRPs) for automotive applications through the integration of modified carbon fibres (CF) and epoxy matrices. The research emphasizes the use of block copolymers (BCPs) and electropolymerisation techniques to improve mechanical properties and interfacial adhesion. Incorporating 2.

Experimental Testing, Manufacturing and Numerical Modeling of Composite and Sandwich Structures.

Composite materials have become indispensable in a multitude of industries, such as aerospace, automotive, construction, sports equipment, and electronics [...

Three-Dimensional Melted Electrowriting Drug Coating Fibers for the Prevention of Device-Associated Infections: A Pilot Study.

Medical device-related infections (DRIs), especially prevalent among critically ill patients, impose significant health and economic burdens and are mainly caused by bacteria. Severe infections often necessitate device removal when antibiotic therapy is inefficient, delaying recovery. To tackle this issue, PCL drug-eluting coated meshes were explored, and they were printed via melt electrowriting (MEW).

Hand Grip Force-Time Curve Indicators Evaluated by Dynamometer: A Systematic Review.

Background: Handgrip strength (HGS) is an indicator of muscular strength, used in the diagnosis of sarcopenia, undernutrition, and physical frailty as well as recovery. Typically, the maximum HGS value is used; however, recent evidence suggests the exploration of new indicators provided based on the force-time curve to achieve a more comprehensive assessment of muscle function. Therefore, the objective was to identify indicators of the HGS profile beyond maximum HGS, based on force-time curves, and to systematize knowledge about their applications to various types of samples, health issues, and physical performance.

Development of the Low-Pressure Die Casting Process for an Aluminium Alloy Part.

The low-pressure die casting (LPDC) process was experimentally and numerically studied to produce AlSi7Mg0.3 components such as steering knuckles. Steering knuckles are important safety components in the context of a vehicle's suspension system, serving as the mechanical interface that facilitates the articulation of the steering to control the front wheel's orientation, while simultaneously bearing the vertical load imposed by the vehicle's weight.

Diagnostic Test Accuracy of Urinary DNA Methylation-based Biomarkers for the Detection of Primary and Recurrent Bladder Cancer: A Systematic Review and Meta-analysis.

Background And Objective: Diagnosis of primary and relapsed bladder carcinomas is accomplished by urethrocystoscopy, an invasive procedure, combined with urinary cytology, with limited sensitivity, resulting in a substantial burden. Thus, noninvasive biomarkers have been investigated, among which DNA methylation has shown promise. This systematic review and meta-analysis sought to assess the diagnostic accuracy of DNA methylation biomarkers reported in the literature for bladder cancer detection, pinpointing the most informative one.

Wear Rate, Tribo-Corrosion, and Plastic Deformation Values of Co-Cr-Mo Alloy in Ringer Lactate Solution.

This study investigates the tribocorrosion performance of a cast Co-Cr-Mo alloy prepared using casting and electromagnetic stirring (EMS) at specific frequencies. The tribocorrosion behaviour of the alloy was evaluated when exposed to Ringer's lactate solution to optimize the EMS parameters and improve its properties. The research focuses on biomedical implant applications and explores how EMS affects alloy wear and corrosion resistance.