Molecular MRI in the Earth's Magnetic Field Using Continuous Hyperpolarization of a Biomolecule in Water.

In this work, we illustrate a method to continuously hyperpolarize a biomolecule, nicotinamide, in water using parahydrogen and signal amplification by reversible exchange (SABRE). Building on the preparation procedure described recently by Truong et al. [ J.

High-Performance Electron Injection Layers with a Wide Processing Window from an Amidoamine-Functionalized Polyfluorene.

In this work, we present organic light-emitting diodes (OLEDs) utilizing a novel amidoamine-functionalized polyfluorene (PFCON-C) as an electron injection layer (EIL). PFCON-C consists of a polyfluorene backbone to which multiple tertiary amine side chains are connected via an amide group. The influence of molecular characteristics on electronic performance and morphological properties was tested and compared to that of the widely used, literature known amino-functionalized polyfluorene (PFN) and polyethylenimine (PEI).

High-Density Peptide Arrays for Malaria Vaccine Development.

The development of an efficacious and practicable vaccine conferring sterile immunity towards a Plasmodium infection represents a not yet achieved goal. A crucial factor for the impact of a given anti-plasmodial subunit vaccine is the identification of the most potent parasitic components required to induce protection from both infection and disease. Here, we present a method based on a novel high-density peptide array technology that allows for a flexible readout of malaria antibodies.

Liquid Glass: A Facile Soft Replication Method for Structuring Glass.

Liquid glass is a photocurable amorphous silica nanocomposite that can be structured using soft replication molds and turned into glass via thermal debinding and sintering. Simple polymer bonding techniques allow the fabrication of complex microsystems in glass like microfluidic chips. Liquid glass is a step toward prototyping of glass microstructures at low cost without requiring cleanroom facilities or hazardous chemicals.

Tacky cyclic olefin copolymer: a biocompatible bonding technique for the fabrication of microfluidic channels in COC.

Cyclic olefin copolymer (COC) is widely used in microfluidics due to its UV-transparency, its biocompatibility and high chemical resistance. Here we present a fast and cost-effective solvent bonding technique, which allows for the efficient bonding of protein-patterned COC structures. The bonding process is carried out at room temperature and takes less than three minutes.

Environmental fate and effect assessment of thioridazine and its transformation products formed by photodegradation.

An experimental and in silico quantitative structure-activity relationship (QSAR) approach was applied to assess the environmental fate and effects of the antipsychotic drug Thioridazine (THI). The sunlight-driven attenuation of THI was simulated using a Xenon arc lamp. The photodegradation reached the complete primary elimination, whereas 97% of primary elimination and 11% of mineralization was achieved after 256 min of irradiation for the initial concentrations of 500 μg L(-1) and 50 mg L(-1), respectively.

Tunable Diffractive Optical Elements Based on Shape-Memory Polymers Fabricated via Hot Embossing.

We introduce actively tunable diffractive optical elements fabricated from shape-memory polymers (SMPs). By utilizing the shape-memory effect of the polymer, at least one crucial attribute of the diffractive optical element (DOE) is tunable and adjustable subsequent to the completed fabrication process. A thermoplastic, transparent, thermoresponsive polyurethane SMP was structured with diverse diffractive microstructures via hot embossing.

Design of a 3T preamplifier which stability is insensitive to coil loading.

In MRI (magnetic resonance imaging), preamplifiers are needed to amplify signals obtained from MRI receiver coils. Under various loading conditions of the corresponding receiver coils, preamplifiers see different source impedance at their input and may become unstable. Therefore preamplifiers which stability is not sensitive to coil loading are desirable.

Lasing in silicon-organic hybrid waveguides.

Silicon photonics enables large-scale photonic-electronic integration by leveraging highly developed fabrication processes from the microelectronics industry. However, while a rich portfolio of devices has already been demonstrated on the silicon platform, on-chip light sources still remain a key challenge since the indirect bandgap of the material inhibits efficient photon emission and thus impedes lasing. Here we demonstrate a class of infrared lasers that can be fabricated on the silicon-on-insulator (SOI) integration platform.

Emissive Polyelectrolytes As Interlayer for Color Tuning and Electron Injection in Solution-Processed Light-Emitting Devices.

Herein we present a solution-processed hybrid device architecture combining organic light-emitting diodes (OLEDs) and light-emitting electrochemical cells (LECs) in a bilayer architecture. The LEC interlayer promotes the charge injection from an air-stable Ag cathode as well as permits the color tuning of the device emission. To this end, we used an alcohol-soluble anionic polyfluorene derivative, the properties of which were investigated by absorption and photoluminescence spectroscopy as well as by cyclic voltammetry.

Cyanobacteria use micro-optics to sense light direction.

Bacterial phototaxis was first recognized over a century ago, but the method by which such small cells can sense the direction of illumination has remained puzzling. The unicellular cyanobacterium Synechocystis sp. PCC 6803 moves with Type IV pili and measures light intensity and color with a range of photoreceptors.

CD-Based Microfluidics for Primary Care in Extreme Point-of-Care Settings.

We review the utility of centrifugal microfluidic technologies applied to point-of-care diagnosis in extremely under-resourced environments. The various challenges faced in these settings are showcased, using areas in India and Africa as examples. Measures for the ability of integrated devices to effectively address point-of-care challenges are highlighted, and centrifugal, often termed CD-based microfluidic technologies, technologies are presented as a promising platform to address these challenges.

Tuning the Microcavity of Organic Light Emitting Diodes by Solution Processable Polymer-Nanoparticle Composite Layers.

In this study, we present a simple method to tune and take advantage of microcavity effects for an increased fraction of outcoupled light in solution-processed organic light emitting diodes. This is achieved by incorporating nonscattering polymer-nanoparticle composite layers. These tunable layers allow the optimization of the device architecture even for high film thicknesses on a single substrate by gradually altering the film thickness using a horizontal dipping technique.

Heteronuclear Micro-Helmholtz Coil Facilitates µm-Range Spatial and Sub-Hz Spectral Resolution NMR of nL-Volume Samples on Customisable Microfluidic Chips.

We present a completely revised generation of a modular micro-NMR detector, featuring an active sample volume of ∼ 100 nL, and an improvement of 87% in probe efficiency. The detector is capable of rapidly screening different samples using exchangeable, application-specific, MEMS-fabricated, microfluidic sample containers. In contrast to our previous design, the sample holder chips can be simply sealed with adhesive tape, with excellent adhesion due to the smooth surfaces surrounding the fluidic ports, and so withstand pressures of ∼2.

Note: Gratings on low absorbing substrates for x-ray phase contrast imaging.

Grating based X-ray phase contrast imaging is on the verge of being applied in clinical settings. To achieve this goal, compact setups with high sensitivity and dose efficiency are necessary. Both can be increased by eliminating unwanted absorption in the beam path, which is mainly due to the grating substrates.

Improving short antimicrobial peptides despite elusive rules for activity.

Antimicrobial peptides (AMPs) can effectively kill a broad range of life threatening multidrug-resistant bacteria, a serious threat to public health worldwide. However, despite great hopes novel drugs based on AMPs are still rare. To accelerate drug development we studied different approaches to improve the antibacterial activity of short antimicrobial peptides.

Polydimethylsiloxane bilayer films with an embedded spontaneous curvature.

Elastomer polydimethylsiloxane (PDMS) films with embedded in-plane gradient stress are created by making PDMS/(PDMS + silicone oil) crosslinked bilayers and extracting the oil in a suitable organic solvent bath. The collapse of the elastomer after oil extraction generates differential stress in the films that is manifested through their out-of-plane deformation. The curvature κ of narrow stripes of the bilayer, which is composed of layers of approximately equal thicknesses and elasticity moduli, is satisfactorily described by the simple relationship κ = 1.

Shear-Induced Detachment of Polystyrene Beads from SAM-Coated Surfaces.

In this work we experimentally and theoretically analyze the detachment of microscopic polystyrene beads from different self-assembled monolayer (SAM) surfaces in a shear flow in order to develop a mechanistic model for the removal of cells from surfaces. The detachment of the beads from the surface is treated as a thermally activated process applying an Arrhenius Ansatz to determine the activation barrier and attempt frequency of the rate determing step in bead removal. The statistical analysis of the experimental shear detachment data obtained in phosphate-buffered saline buffer results in an activation energy around 20 kJ/mol, which is orders of magnitude lower than the adhesion energy measured by atomic force microscopy (AFM).

A biphasic mercury-ion sensor: exploiting microfluidics to make simple anilines competitive ligands.

Combining the molecular wire effect with a biphasic sensing approach (analyte in water, sensor-dye in 2-methyltetrahydrofuran) and a microfluidic flow setup leads to the construction of a mercury-sensitive module. We so instantaneously detect Hg(2+) ions in water at a 500 μM concentration. The sensor, conjugated non-water soluble polymer 1 (XFPF), merely supports dibutylaniline substituents as binding units.

Optimization of oncocin for antibacterial activity using a SPOT synthesis approach: extending the pathogen spectrum to Staphylococcus aureus.

The identification of lead molecules against multidrug-resistant bacteria ensuing the development of novel antimicrobial drugs is an urgent task. Proline-rich antimicrobial peptides are highly active in vitro and in vivo, but only against a few Gram-negative human pathogens, with rather weak activities against Pseudomonas aeruginosa and Staphylococcus aureus. This reduced level of efficacy could be related to inadequate uptake mechanisms or structural differences of the intracellular target proteins, i.

A Comparison of Different Methods to Generate Tooth Surface Models Without Applying Ionizing Radiation for Digital 3-Dimensional Image Fusion With Magnetic Resonance Imaging-Based Data of the Head and Neck Region.

Objective: The 3-dimensional display of the vocal tract and teeth is necessary in numerous clinical and scientific contexts. Due to the different tissue properties this can only be achieved by combining different imaging techniques. A comparison of methods to record the tooth surface to create combined models of the vocal tract and teeth without applying ionizing radiation is displayed in this study.

All-polymer photonic sensing platform based on whispering-gallery mode microgoblet lasers.

We present an all-polymer photonic sensing platform based on whispering-gallery mode microgoblet lasers integrated into a microfluidic chip. The chip is entirely made from polymers, enabling the use of the devices as low-cost disposables. The microgoblet cavities feature quality factors exceeding 10(5) and are fabricated from poly(methyl methacrylate) (PMMA) using spin-coating, mask-based optical lithography, wet chemical etching, and thermal reflow.

Droplet-Array (DA) Sandwich Chip: A Versatile Platform for High-Throughput Cell Screening Based on Superhydrophobic-Superhydrophilic Micropatterning.

A droplet-array (DA) sandwich chip is a miniaturized platform for cell-based high-throughput screening. It is based on sandwiching of a glass slide with a preprinted library and a superhydrophobic-superhydrophilic pattern, which consists of thousands of simultaneously formed microdroplets containing cells. The DA sandwich chip allows for one-step cell seeding, simultaneous initiation of screening, and 1000 times less reagent consumption than a regular 96-well plate.

Densely Packed Microgoblet Laser Pairs for Cross-Referenced Biomolecular Detection.

Parallel readout of the micro-lasers facilitates effective mutual filtering of highly localized refractive index and temperature fluctuations in the analyte. Cross-referenced detection of two different types of proteins and complete chemical transducer reconfiguration is demonstrated. Selective surface functionalization of the individual lasers with high spatial accuracy is achieved by aligned microcontact stamping.

Quantification of the Influence of Endotoxins on the Mechanics of Adult and Neonatal Red Blood Cells.

In this study, we physically modeled the influence of endotoxin-induced sepsis symptoms on human red blood cells (RBCs) by quantifying the impact of endotoxins on the cell mechanics by the analysis of Fourier-transformed mean square amplitude of shape fluctuation, called flicker spectroscopy. With the aid of a microfluidic diffusion chamber, we noninvasively determined principal mechanical parameters of human RBCs in the absence and presence of endotoxins for individual RBCs for the first time. Because of the elongation of saccharide chain length of endotoxins, we found an increase in the morphological transition from discocytes to echinocytes, and monotonic changes in the mechanical parameters.