The noise factor of receiver coil matching networks in MRI.

In typical MRI applications the dominant noise sources in the received signal are the sample, the coil loop and the preamplifier. We hypothesize that in some cases (e.g.

Colour formation on the wings of the butterfly Hypolimnas salmacis by scale stacking.

The butterfly genus Hypolimnas features iridescent blue colouration in some areas of its dorsal wings. Here, we analyse the mechanisms responsible for such colouration on the dorsal wings of Hypolimnas salmacis and experimentally demonstrate that the lower thin lamina in the white cover scales causes the blue iridescence. This outcome contradicts other studies reporting that the radiant blue in Hypolimnas butterflies is caused by complex ridge-lamellar architectures in the upper lamina of the cover scales.

Post passivation light trapping back contacts for silicon heterojunction solar cells.

Light trapping in crystalline silicon (c-Si) solar cells is an essential building block for high efficiency solar cells targeting low material consumption and low costs. In this study, we present the successful implementation of highly efficient light-trapping back contacts, subsequent to the passivation of Si heterojunction solar cells. The back contacts are realized by texturing an amorphous silicon layer with a refractive index close to the one of crystalline silicon at the back side of the silicon wafer.

Determination of the packing fraction in photonic glass using synchrotron radiation nanotomography.

Photonic glass is a material class that can be used as photonic broadband reflectors, for example in the infrared regime as thermal barrier coating films. Photonic properties such as the reflectivity depend on the ordering and material packing fraction over the complete film thickness of up to 100 µm. Nanotomography allows acquiring these key parameters throughout the sample volume at the required resolution in a non-destructive way.

Bioinspired Superhydrophobic Highly Transmissive Films for Optical Applications.

Inspired by the transparent hair layer on water plants Salvinia and Pistia, superhydrophobic flexible thin films, applicable as transparent coatings for optoelectronic devices, are introduced. Thin polymeric nanofur films are fabricated using a highly scalable hot pulling technique, in which heated sandblasted steel plates are used to create a dense layer of nano- and microhairs surrounding microcavities on a polymer surface. The superhydrophobic nanofur surface exhibits water contact angles of 166 ± 6°, sliding angles below 6°, and is self-cleaning against various contaminants.

Fully automated chemiluminescence detection using an electrified-Lab-on-a-Disc (eLoaD) platform.

Typical Lab-on-a-Disc (LoaD) platforms cannot make a continuous measurement while the disc is spinning; this drawback means that the disc usually must be stopped and aligned with a sensor. This can result in measurement errors in time-dependent assays along with inaccuracies due to liquid displacement and bubble formation in the absence of a stabilising centrifugal field. This paper presents a novel concept for a wirelessly electrified-Lab-on-a-Disc (eLoaD) platform that allows continuous measurement of experimental parameters while the disc is spinning.

Magnetic resonance imaging reveals functional anatomy and biomechanics of a living dragon tree.

Magnetic resonance imaging (MRI) was used to gain in vivo insight into load-induced displacements of inner plant tissues making a non-invasive and non-destructive stress and strain analysis possible. The central aim of this study was the identification of a possible load-adapted orientation of the vascular bundles and their fibre caps as the mechanically relevant tissue in branch-stem-attachments of Dracaena marginata. The complex three-dimensional deformations that occur during mechanical loading can be analysed on the basis of quasi-three-dimensional data representations of the outer surface, the inner tissue arrangement (meristem and vascular system), and the course of single vascular bundles within the branch-stem-attachment region.

Multiscale dispersion-state characterization of nanocomposites using optical coherence tomography.

Nanocomposite materials represent a success story of nanotechnology. However, development of nanomaterial fabrication still suffers from the lack of adequate analysis tools. In particular, achieving and maintaining well-dispersed particle distributions is a key challenge, both in material development and industrial production.

Microstructures of superhydrophobic plant leaves - inspiration for efficient oil spill cleanup materials.

The cleanup of accidental oil spills in water is an enormous challenge; conventional oil sorbents absorb large amounts of water in addition to oil and other cleanup methods can cause secondary pollution. In contrast, fresh leaves of the aquatic ferns Salvinia are superhydrophobic and superoleophilic, and can selectively absorb oil while repelling water. These selective wetting properties are optimal for natural oil absorbent applications and bioinspired oil sorbent materials.

Photon Upconversion at Crystalline Organic-Organic Heterojunctions.

Triplet transfer across a surface-anchored metal-organic-framework heterojunction is demonstrated by the observation of triplet-triplet annihilation photon -upconversion in a sensitizer-emitter heterostructure. Upconversion thresholds under 1 mW cm are achieved. In the broader context, the double-electron-exchange mechanism of triplet transfer indicates that the heterojunction quality is sufficient for electrons to move between layers in this solution-processed crystalline heterostructure.

A microwave resonator integrated on a polymer microfluidic chip.

We describe a novel stacked split-ring type microwave (MW) resonator that is integrated into a 10mm by 10mm sized microfluidic chip. A straightforward and scalable batch fabrication process renders the chip suitable for single-use applications. The resonator volume can be conveniently loaded with liquid sample via microfluidic channels patterned into the mid layer of the chip.

Introducing natural thermoplastic shellac to microfluidics: A green fabrication method for point-of-care devices.

We present a sustainable fabrication method for cheap point-of-care microfluidic systems, employing hot embossing of natural shellac as a key feature of an energy-efficient fabrication method that exclusively uses renewable materials as consumables. Shellac is a low-cost renewable biomaterial that features medium hydrophilicity (e.g.

Impact of adjustable cryogel properties on the performance of prostate cancer cells in 3D.

Background: Biochemical and physical characteristics of extracellular environment play a key role in assisting cell behavior over different molecular pathways. In this study, we investigated how the presence of chemical binding sites, the pore network and the stiffness of designed scaffolds affected prostate cancer cells.

Methods: A blend of poly hydroxyethyl methacrylate-alginate-gelatin scaffold was synthesized by cryogelation process using polyethyleneglycol diacrylate (PEGda) and glutaraldehyde as cross linkers.

Digitally Printed Dewetting Patterns for Self-Organized Microelectronics.

Self-organization of functional materials induced by low surface-energetic direct printed structures is presented. This study investigates fundamental fluid and substrate interactions and fabricates all-printed small area organic photodetectors with On-Off ratios of ≈10(5) and dark current densities of ≈10(-4) mA cm(-2) , as well as ring oscillators based on n-type organic field-effect transistors showing working frequencies up to 400 Hz.

Time-resolved NMR metabolomics of plant cells based on a microfluidic chip.

The plant secondary metabolism generates numerous compounds harbouring pharmaceutical activity. In plants, these compounds are typically formed by different and specialised cell types that have to interact constituting a metabolic process chain. This interactivity impedes biotechnological production of secondary compounds, because cell differentiation is suppressed under the conditions of a batch bio-fermenter.

High-flexibility combinatorial peptide synthesis with laser-based transfer of monomers in solid matrix material.

Laser writing is used to structure surfaces in many different ways in materials and life sciences. However, combinatorial patterning applications are still limited. Here we present a method for cost-efficient combinatorial synthesis of very-high-density peptide arrays with natural and synthetic monomers.

Topology optimization for three-dimensional electromagnetic waves using an edge element-based finite-element method.

This paper develops a topology optimization procedure for three-dimensional electromagnetic waves with an edge element-based finite-element method. In contrast to the two-dimensional case, three-dimensional electromagnetic waves must include an additional divergence-free condition for the field variables. The edge element-based finite-element method is used to both discretize the wave equations and enforce the divergence-free condition.

Increasing the field of view in grating based X-ray phase contrast imaging using stitched gratings.

Grating based X-ray differential phase contrast imaging (DPCI) allows for high contrast imaging of materials with similar absorption characteristics. In the last years' publications, small animals or parts of the human body like breast, hand, joints or blood vessels have been studied. Larger objects could not be investigated due to the restricted field of view limited by the available grating area.

Superporous Poly(ethylene glycol) Diacrylate Cryogel with a Defined Elastic Modulus for Prostate Cancer Cell Research.

The physical and mechanical properties of the tumor microenvironment are crucial for the growth, differentiation and migration of cancer cells. However, such microenvironment is not found in the geometric constraints of 2D cell culture systems used in many cancer studies. Prostate cancer research, in particular, suffers from the lack of suitable in vitro models.

Numerics made easy: solving the Navier-Stokes equation for arbitrary channel cross-sections using Microsoft Excel.

The fluid mechanics of microfluidics is distinctively simpler than the fluid mechanics of macroscopic systems. In macroscopic systems effects such as non-laminar flow, convection, gravity etc. need to be accounted for all of which can usually be neglected in microfluidic systems.

Molecular MRI in the Earth's Magnetic Field Using Continuous Hyperpolarization of a Biomolecule in Water.

In this work, we illustrate a method to continuously hyperpolarize a biomolecule, nicotinamide, in water using parahydrogen and signal amplification by reversible exchange (SABRE). Building on the preparation procedure described recently by Truong et al. [ J.

High-Performance Electron Injection Layers with a Wide Processing Window from an Amidoamine-Functionalized Polyfluorene.

In this work, we present organic light-emitting diodes (OLEDs) utilizing a novel amidoamine-functionalized polyfluorene (PFCON-C) as an electron injection layer (EIL). PFCON-C consists of a polyfluorene backbone to which multiple tertiary amine side chains are connected via an amide group. The influence of molecular characteristics on electronic performance and morphological properties was tested and compared to that of the widely used, literature known amino-functionalized polyfluorene (PFN) and polyethylenimine (PEI).

High-Density Peptide Arrays for Malaria Vaccine Development.

The development of an efficacious and practicable vaccine conferring sterile immunity towards a Plasmodium infection represents a not yet achieved goal. A crucial factor for the impact of a given anti-plasmodial subunit vaccine is the identification of the most potent parasitic components required to induce protection from both infection and disease. Here, we present a method based on a novel high-density peptide array technology that allows for a flexible readout of malaria antibodies.

Liquid Glass: A Facile Soft Replication Method for Structuring Glass.

Liquid glass is a photocurable amorphous silica nanocomposite that can be structured using soft replication molds and turned into glass via thermal debinding and sintering. Simple polymer bonding techniques allow the fabrication of complex microsystems in glass like microfluidic chips. Liquid glass is a step toward prototyping of glass microstructures at low cost without requiring cleanroom facilities or hazardous chemicals.

Tacky cyclic olefin copolymer: a biocompatible bonding technique for the fabrication of microfluidic channels in COC.

Cyclic olefin copolymer (COC) is widely used in microfluidics due to its UV-transparency, its biocompatibility and high chemical resistance. Here we present a fast and cost-effective solvent bonding technique, which allows for the efficient bonding of protein-patterned COC structures. The bonding process is carried out at room temperature and takes less than three minutes.