A dam or a polder? Stakeholders' dispute over the "right" flood-protection measure in the Czech Republic.

This study focuses on the Skalička Waterwork (SWW), a largely debated and media-covered water-related/flood-protection project in the Czech Republic. Relying primarily on stakeholder interviews, we traced back and reconstructed the project's development, including its key tipping points reflecting the changing societal preferences for particular measures, yet also the involvement of individual actors/stakeholders, and their differing views. The case eventually crystallized into the "dam versus polder" dispute; concerned by the repercussions for the local landscape, a joint initiative of NGOs, local activists, and politicians not only opposed the dam variant proposed by the state river basin administration but also succeeded in pushing through the alternative scheme of side dry polder.

Research on rockburst prevention systems based on the attenuation law of coal and rock vibration wave energy.

During the coal and rock mass fracture process, elastic properties are released and vibration waves are radiated outward. The energy attenuation characteristics of these waves can describe the cumulative damage and elastic energy accumulation of the mass. To investigate coal and rock mass failure characteristics and energy attenuation rules during rockburst, numerical simulation and laboratory testing were utilized to study the energy transfer laws under various parameters.

An insight into market and non-market alternative food networks in Czechia during Covid-19 and beyond.

Introduction: The Covid-19 pandemic affected food systems in many countries and emphasized a lot of already existing social, economic and environmental agri-food problems. Alternative food networks (AFNs), praised for their ability to improve the food systems, were under stress, however, at the same time, the changed conditions may have opened new possibilities. In this paper we address the importance of AFNs during the pandemic and investigate how households have changed their participation in AFNs.

Boundary of ecosystem services: A response to.

Chen et al. (2023) have proposed a scheme to define which services should be included as ecosystem services and which should be excluded so as to avoid "an all-encompassing metaphor that captures any benefit". We discuss the proposals, drawing attention in particular to definitions of 'natural capital' and 'ecosystems', the complexities of separating biotic from abiotic flows, and the importance of geodiversity and geosystem services in delivering societal benefits.

Effect of Varying Normal Stiffness on Soft Rock Joints under Cyclic Shear Loads.

The evaluation of changes in shear resistance on soft (or weathered) rock joints under cyclic shear loads with constant normal load (CNL) and constant normal stiffness (CNS) significantly contributes to increasing the safety and stability of rock slopes and underground structures. In this study, a series of cyclic shear tests were conducted on simulated soft rock joints with regular (15°-15°, 30°-30°) and irregular (15°-30°) asperities under different normal stiffnesses (). The results indicated that the first peak shear stress increases with the increase in up to the normal stiffness of the joints ().

Investigating the impact of weak geomagnetic fluctuations on pigeon races.

The existence of avian magnetic orientation has been proved by many experimental studies, however, evidence for the use of magnetic cues by homing pigeons remains controversial. To investigate magnetic orientation by homing pigeons, we analyzed the results of pigeon races relative to weak fluctuations in the geomagnetic field, assuming that such disturbances could impact navigational efficiency if based on magnetoreception. Whereas most of the previous studies recorded and analyzed vanishing bearing of individually released pigeons, we evaluated relative duration of the homeward flight (homing speed, as a proxy of navigational efficiency) and its dependence on specific geomagnetic indices in racing pigeons released collectively.

Regeneration of Post-Agricultural Brownfield for Social Care Needs in Rural Community: Is There Any Transferable Experience?

In the 21st century, rural communities face many challenges, including implications of dynamic population aging, a lack of social care services, and the occurrence of abandoned post-agricultural brownfields. This paper is methodologically based on the findings derived from a set of qualitative in-depth interviews with the key rural stakeholders, explores the decisive factors and limits, accelerators, and barriers governing successful regeneration of the post-agricultural brownfield in the post-socialist environment. We are using the case of the regeneration project of a large-scale former communist agricultural cooperative, located in Vranovice, the Czech Republic, to illuminate how complex and challenging the redevelopment of a post-agricultural brownfield into a social care facility for elderly people is.

Flow Field Analysis Inside and at the Outlet of the Abrasive Head.

This paper focuses on the investigation of a multiphase flow of water, air, and abrasive particles inside and at the outlet of the abrasive head with the help of computational fluid dynamics calculations and measurements. A standard abrasive head with a water nozzle hole diameter of 0.33 mm (0.

Effect of Periodic Water Clusters on AISI 304 Welded Surfaces.

This study compared the effect of the interaction time of periodic water clusters on the surface integrity of AISI 304 tungsten inert gas (TIG) welded joints at different excitation frequencies, as the effect of the technological parameters of pulsating water jet (PWJ) on the mechanical properties of TIG welded joints are under-researched. The TIG welded joints were subjected to different frequencies (20 and 40 kHz) and traverse speeds (1-4 mm/s) at a water pressure of 40 MPa and a standoff distance of 70 mm. The effect of the interaction of the pulsating jet on the material and the enhancement in its mechanical properties were compared through residual stress measurements, surface roughness, and sub-surface microhardness.

Standoff Distance in Ultrasonic Pulsating Water Jet.

The water hammer effect is the basis of technologies which is artificially responsible for the decay of continuous jets. A recently developed technique enhances the pressure fluctuations using an acoustic chamber, leading to enhanced erosion effects for various water volume flow rates. The optimum standoff distance for an ultrasonic enhanced water jet is not appropriately estimated using an inclined trajectory.

Effect of Hot Isostatic Pressing on Porosity and Mechanical Properties of 316 L Stainless Steel Prepared by the Selective Laser Melting Method.

The manufacturing route primarily determines the properties of materials prepared by additive manufacturing methods. In this work, the microstructural features and mechanical properties of 316 L stainless steel prepared by the selective laser method have been determined. Three types of samples, (i) selective laser melted (SLM), (ii) selective laser melted and hot isostatic pressed (HIP) and (iii) selective laser melted and heat treated (HT), were characterized.

Points of attention in designing tools for regional brownfield prioritization.

The regeneration of brownfields has been increasingly recognized as a key instrument in sustainable land management, since free developable land (or so called "greenfields") has become a scare and more expensive resource, especially in densely populated areas. However, the complexity of these sites requires considerable efforts to successfully complete their revitalization projects, thus requiring the development and application of appropriate tools to support decision makers in the selection of promising sites where efficiently allocate the limited financial resources. The design of effective prioritization tools is a complex process, which requires the analysis and consideration of critical points of attention (PoAs) which has been identified considering the state of the art in literature, and lessons learned from previous developments of regional brownfield (BF) prioritization processes, frameworks and tools.