Hybrid Cellulosic Substrates Impregnated with Meta-PBI-Stabilized Carbon Nanotubes/Plant Extract-Synthesized Zinc Oxide-Antibacterial and Photocatalytic Dye Degradation Study.

Novel fibrous cellulosic substrates impregnated with meta-polybenzimidazole (PBI)-stabilized carbon nanotubes/zinc oxide with different weight content of ZnO and with the use of dimethylacetamide as dispersant media. The pristine ZnO nanoparticle powder was prepared by plant extract-mediated synthesis using L. The green synthesized ZnO possesses an average crystallite size of 15 nm.

Study of Ammonia Adsorption on Magnetite Surfaces with Molecular Dynamics Simulations.

The present study proposes an atomistic molecular dynamics model system of a magnetite (FeO) {111} surface. The effect of temperature on the adsorption process of ammonia (NH) at low concentrations in the aqueous phase has been considered. The molecular dynamics simulations were carried out using the Clay force field (Clay FF) with a modification for the iron atoms in the NPT ensemble at a pressure of 90 bar.

Nanocomposite Perfluorosulfonic Acid/Montmorillonite-Na Polymer Membrane as Gel Electrolyte in Hybrid Supercapacitors.

Solid-state supercapacitors with gel electrolytes have emerged as a promising field for various energy storage applications, including electronic devices, electric vehicles, and mobile phones. In this study, nanocomposite gel membranes were fabricated using the solution casting method with perfluorosulfonic acid (PFSA) ionomer dispersion, both with and without the incorporation of 10 wt.% montmorillonite (MMT).

Molybdenum-Doped ZnO Thin Films Obtained by Spray Pyrolysis.

A batch of ZnO thin films, pure and doped with molybdenum (up to 2 mol %), were prepared using the spray pyrolysis technique on glass and silicon substrates. The effect of molybdenum concentration on the morphology, structure and optical properties of the films was investigated. X-ray diffraction (XRD) results show a wurtzite polycrystalline crystal structure.

Corrosion Mechanism and Electrochemical Reactions on Alloy 690 in Simulated Primary Coolant of Water-Water Energy Reactors.

During the power operation of the primary loop of a water cooled-water moderated energy reactor (WWER), the water chemistry evolves from a high-boron high-potassium composition to significantly lower concentrations of both constituents at the end of a campaign, and the Li concentration reaches ca. 0.7-0.

Corrosion of Stainless Steel in Simulated Nuclear Reactor Primary Coolant-Experiments and Modeling.

In the present paper, the effect of the evolution of primary water chemistry during power operation on the corrosion rate and conduction mechanism of oxide films on stainless steel is studied by in situ impedance spectroscopy at 300 °C/9 MPa during 1-week exposure periods in an autoclave connected to a recirculation loop. At the end of the exposure period, the samples were anodically polarized in a wide range of potentials to evaluate the stability of the passive oxide. Separate samples of the same steel were simultaneously exposed to the coolant and subsequently analyzed by glow discharge optical emission spectroscopy (GDOES) in order to estimate the thickness and the in-depth composition of the formed oxides.

The Recent Progresses of Electrodes and Electrolysers for Seawater Electrolysis.

The utilization of renewable energy for hydrogen production presents a promising pathway towards achieving carbon neutrality in energy consumption. Water electrolysis, utilizing pure water, has proven to be a robust technology for clean hydrogen production. Recently, seawater electrolysis has emerged as an attractive alternative due to the limitations of deep-sea regions imposed by the transmission capacity of long-distance undersea cables.

Progress in Anode Stability Improvement for Seawater Electrolysis to Produce Hydrogen.

Seawater electrolysis for hydrogen production is a sustainable and economical approach that can mitigate the energy crisis and global warming issues. Although various catalysts/electrodes with excellent activities have been developed for high-efficiency seawater electrolysis, their unsatisfactory durability, especially for anodes, severely impedes their industrial applications. In this review, attention is paid to the factors that affect the stability of anodes and the corresponding strategies for designing catalytic materials to prolong the anode's lifetime.

Photodynamic Inactivation of Bovine Coronavirus with the Photosensitizer Toluidine Blue O.

Coronaviruses (CoVs) belong to the group of enveloped positive-sense single-strand RNA viruses and are causative agents of respiratory, gastro-intestinal, and central nervous systems diseases in many host species, i.e., birds, mammals, and humans.

Corrosion-Resistive ZrO Barrier Films on Selected Zn-Based Alloys.

This work presents the enhanced corrosion resistance of newly developed two-layer composite coatings deposited on low-carbon steel: electrodeposited zinc alloy coatings (Zn-Ni with 10 wt.% Ni (ZN) or Zn-Co with 3 wt.% Co (ZC), respectively) and a top ZrO sol-gel layer.

Electrochemical Performance of Symmetric Solid-State Supercapacitors Based on Carbon Xerogel Electrodes and Solid Polymer Electrolytes.

For the development and optimization of solid-state symmetrical supercapacitors, herein, we propose using carbon-based electrodes and sodium- and lithium-form Aquivion electrolyte membranes, which serve as the separator and electrolyte. Carbon xerogels, synthesized using microwave-assisted sol-gel methodology, with designed and controlled properties were obtained as electrode materials. Commercial activated carbon (YP-50F, "Kuraray Europe" GmbH) was used as the active material for comparison.

Anodic Oxidation of Tungsten under Illumination-Multi-Method Characterization and Modeling at the Molecular Level.

Tungsten oxide has received considerable attention as photo-anode in photo-assisted water splitting due to its considerable advantages such as significant light absorption in the visible region, good catalytic properties, and stability in acidic and oxidative conditions. The present paper is a first step in a detailed study of the mechanism of porous WO growth via anodic oxidation. In-situ electrochemical impedance spectroscopy (EIS) and intensity modulated photocurrent spectroscopy (IMPS) during oxidation of W illuminated with UV and visible light are employed to study the ionic and electronic processes in slightly acidic sulfate-fluoride electrolytes and a range of potentials 4-10 V.

Microwave synthesis of molybdenene from MoS.

Dirac materials are characterized by the emergence of massless quasiparticles in their low-energy excitation spectrum that obey the Dirac Hamiltonian. Known examples of Dirac materials are topological insulators, d-wave superconductors, graphene, and Weyl and Dirac semimetals, representing a striking range of fundamental properties with potential disruptive applications. However, none of the Dirac materials identified so far shows metallic character.

Recent Advances and Future Prospects for Memristive Materials, Devices, and Systems.

Memristive technology has been rapidly emerging as a potential alternative to traditional CMOS technology, which is facing fundamental limitations in its development. Since oxide-based resistive switches were demonstrated as memristors in 2008, memristive devices have garnered significant attention due to their biomimetic memory properties, which promise to significantly improve power consumption in computing applications. Here, we provide a comprehensive overview of recent advances in memristive technology, including memristive devices, theory, algorithms, architectures, and systems.

PEM Electrochemical Hydrogen Compression with Sputtered Pt Catalysts.

This work presents research on thin magnetron-sputtered platinum (Pt) films deposited over commercial gas diffusion electrodes and applied to convert and pressurize hydrogen in an electrochemical hydrogen pump. The electrodes were integrated into a membrane electrode assembly with a proton conductive membrane. Their electrocatalytic efficiency toward hydrogen oxidation and hydrogen evolution reactions was studied in a self-made laboratory test cell by means of steady-state polarization curves and cell voltage measurements (U/j and U/p characteristics).

Environmentally Benign pSOFC for Emissions-Free Energy: Assessment of Nickel Network Resistance in Anodic Ni/BCY15 Nanocatalyst.

Yttrium-doped barium cerate (BCY15) was used as ceramic matrix to obtain Ni/BCY15 anode cermet for application in proton-conducting solid oxide fuel cells (pSOFC). Ni/BCY15 cermets were prepared in two different types of medium, namely deionized water (W) and anhydrous ethylene glycol (EG) using wet chemical synthesis by hydrazine. An in-depth analysis of anodic nickel catalyst was made aiming to elucidate the effect of anode tablets' preparation by high temperature treatment on the resistance of metallic Ni in Ni/BCY15-W and Ni/BCY15-EG anode catalysts.

Electrochemical-Memristor-Based Artificial Neurons and Synapses-Fundamentals, Applications, and Challenges.

Artificial neurons and synapses are considered essential for the progress of the future brain-inspired computing, based on beyond von Neumann architectures. Here, a discussion on the common electrochemical fundamentals of biological and artificial cells is provided, focusing on their similarities with the redox-based memristive devices. The driving forces behind the functionalities and the ways to control them by an electrochemical-materials approach are presented.

Flexible Polymer-Ionic Liquid Films for Supercapacitor Applications.

Mechanically and thermally stable novel gel polymer electrolytes (GPEs) have been prepared and applied in supercapacitor cells. Quasi-solid and flexible films were prepared by solution casting technique and formulated by immobilization of ionic liquids (ILs) differing in their aggregate state. A crosslinking agent and a radical initiator were added to further stabilize them.

Long-Term Oxidation of Zirconium Alloy in Simulated Nuclear Reactor Primary Coolant-Experiments and Modeling.

Oxidation of Zr-1%Nb fuel cladding alloy in simulated primary coolant of a pressurized water nuclear reactor is followed by in-situ electrochemical impedance spectroscopy. In-depth composition and thickness of the oxide are estimated by ex-situ analytical techniques. A kinetic model of the oxidation process featuring interfacial reactions of metal oxidation and water reduction, as well as electron and ion transport through the oxide governed by diffusion-migration, is parameterized by quantitative comparison to impedance data.

Chemical Influence of Carbon Interface Layers in Metal/Oxide Resistive Switches.

Thin layers introduced between a metal electrode and a solid electrolyte can significantly alter the transport of mass and charge at the interfaces and influence the rate of electrode reactions. C films embedded in functional materials can change the chemical properties of the host, thereby altering the functionality of the whole device. Using X-ray spectroscopies, here we demonstrate that the chemical and electronic structures in a representative redox-based resistive switching (RS) system, TaO/Ta, can be tuned by inserting a graphene or ultrathin amorphous C layer.

Electrochemical performance of Paenibacillus profundus YoMME encapsulated in alginate polymer.

Gram-positive bacterium Paenibacillus profundus YoMME, entrapped in an alginate polymer onto graphite paper, preserves its extracellular electron transfer capabilities. A current density of up to 30 mA m was generated at an applied potential of -200 mV (vs. SHE).

Draft Genome Sequence of Paenibacillus profundus YoMME, a New Exoelectrogenic Gram-Positive Bacterium.

Paenibacillus profundus YoMME was isolated from the anodic biofilm of a sediment microbial fuel cell and recognized as one of the few exoelectrogenic Gram-positive bacteria, capable of transferring electrons extracellularly. Here, we report its draft genome sequence. The genome project is deposited at DDBJ/ENA/GenBank under the accession number JAJNBZ000000000.

New Insights on the Nickel State Deposited by Hydrazine Wet-Chemical Synthesis Route in the Ni/BCY15 Proton-Conducting SOFC Anode.

Yttrium-doped barium cerate (BCY15) was used as an anode ceramic matrix for synthesis of the Ni-based cermet anode with application in proton-conducting solid oxide fuel cells (pSOFC). The hydrazine wet-chemical synthesis was developed as an alternative low-cost energy-efficient route that promotes 'in situ' introduction of metallic Ni particles in the BCY15 matrix. The focus of this study is a detailed comparative characterization of the nickel state in the Ni/BCY15 cermets obtained in two types of medium, aqueous and anhydrous ethylene glycol environment, performed by a combination of XRD, N physisorption, SEM, EPR, XPS, and electrochemical impedance spectroscopy.

Gram-positive bacteria covered bioanode in a membrane-electrode assembly for use in bioelectrochemical systems.

A novel strain of Gram-positive bacteria Paenibacillus profundus YoMME was recognized by sequencing of 16S rRNA gene and after that tested for exoelectrogenicity for the first time. It was found that at an applied potential of -0.195 V (vs.