Fabric phase sorptive extraction combined with gas chromatography-mass spectrometry as an innovative analytical technique for the determination of selected polycyclic aromatic hydrocarbons in herbal infusions and tea samples.

This study presents a fabric phase sorptive extraction (FPSE) protocol for the isolation and preconcentration of four selected polycyclic aromatic hydrocarbons from tea samples and herbal infusions, followed by their separation and quantification by gas chromatography-mass spectrometry (GC-MS). In FPSE, extraction of the target analytes is performed utilizing a flexible fabric substrate that is coated with a highly efficient sol-gel sorbent. In this work, eighteen different FPSE membranes were examined, with the highest extraction recoveries being observed with the sol-gel C coated FPSE membrane.

Overexpression of recombinant proteins containing non-canonical amino acids in Vibrio natriegens: p-azido-L-phenylalanine as coupling site for F-tags.

Vibrio natriegens is the fastest growing organism identified so far. The minimum doubling time of only 9.4 min, the ability to utilize over 60 different carbon sources and its non-pathogenic properties make it an interesting alternative to E.

How UV light lowers the conductivity of SrTiO by photochemical water splitting at elevated temperature.

Nominally undoped SrTiO single crystals were illuminated by UV light at 350 °C in oxidizing as well as reducing atmospheres. In N/O atmospheres, UV irradiation enhances the conductivity of SrTiO by several orders of magnitude. In dry H atmosphere UV exposure leads to the opposite conductivity effect, , above band gap energy illumination surprisingly lowers the conductivity.

Sterically Demanding Flexible Phosphoric Acids for Constructing Efficient and Multi-Purpose Asymmetric Organocatalysts.

Herein, we present a novel approach for various asymmetric transformations of cyclic enones. The combination of readily accessible chiral diamines and sterically demanding flexible phosphoric acids resulted in a simple and highly tunable catalyst framework. The careful optimization of the catalyst components led to the identification of a particularly powerful and multi-purpose organocatalyst, which was successfully applied for asymmetric epoxidations, aziridinations, aza-Michael-initiated cyclizations, as well as for a novel Robinson-like Michael-initiated ring closure/aldol cyclization.

QCL-IR Spectroscopy for In-Line Monitoring of Proteins from Preparative Ion-Exchange Chromatography.

In this study, an external cavity-quantum cascade laser-based mid-infrared (IR) spectrometer was applied for in-line monitoring of proteins from preparative ion-exchange chromatography. The large optical path length of 25 μm allowed for robust spectra acquisition in the broad tuning range between 1350 and 1750 cm, covering the most important spectral region for protein secondary structure determination. A significant challenge was caused by the overlapping mid-IR bands of proteins and changes in the background absorption of water due to the NaCl gradient.

Hepatocyte Proteome Alterations Induced by Individual and Combinations of Common Free Fatty Acids.

Non-alcoholic fatty liver disease is a pathology with a hard-to-detect onset and is estimated to be present in a quarter of the adult human population. To improve our understanding of the development of non-alcoholic fatty liver disease, we treated a human hepatoma cell line model, HepG2, with increasing concentrations of common fatty acids, namely myristic, palmitic and oleic acid. To reproduce more physiologically representative conditions, we also included combinations of these fatty acids and monitored the cellular response with an in-depth proteomics approach and imaging techniques.

Recent Advances in Additive Manufacturing and 3D Bioprinting for Organs-On-A-Chip and Microphysiological Systems.

The re-creation of physiological cellular microenvironments that truly resemble complex architectures is the key aspect in the development of advanced organotypic tissue constructs. Among others, organ-on-a-chip technology has been increasingly used in recent years to create improved models for organs and tissues in human health and disease, because of its ability to provide spatio-temporal control over soluble cues, biophysical signals and biomechanical forces necessary to maintain proper organotypic functions. While media supply and waste removal are controlled by microfluidic channel by a network the formation of tissue-like architectures in designated micro-structured hydrogel compartments is commonly achieved by cellular self-assembly and intrinsic biological reorganization mechanisms.

Characterization of selected organometallic compounds by electrospray ionization- and matrix-assisted laser desorption/ionization-mass spectrometry using different types of instruments: Possibilities and limitations.

Rationale: Organometallic compounds are becoming increasingly important in their industrial application as catalysts. Mass spectrometry is an essential tool for the structural confirmation of such organometallics. Because the analysis of this class of molecules can be challenging, the ionization behavior and structural confirmation of selected transition metal catalysts are described in this work.

Performance modulation through selective, homogenous surface doping of lanthanum strontium ferrite electrodes revealed by PLD impedance measurements.

Accelerating the oxygen reduction kinetics of solid oxide fuel cell (SOFC) cathodes is crucial to improve their efficiency and thus to provide the basis for an economically feasible application of intermediate temperature SOFCs. In this work, minor amounts of Pt were doped into lanthanum strontium ferrite (LSF) thin film electrodes to modulate the material's oxygen exchange performance. Surprisingly, Pt was found to be incorporated on the B-site of the perovskite electrode as non metallic Pt.

Investigating oxygen reduction pathways on pristine SOFC cathode surfaces by PLD impedance spectroscopy.

The oxygen exchange reaction mechanism on truly pristine surfaces of SOFC cathode materials (LaSrCoO = LSC, LaSrFeO = LSF, (LaSr)PtFeO = Pt:LSF, SrTiFeO = STF, PrCeO = PCO and LaSrMnO = LSM) was investigated employing impedance spectroscopy during pulsed laser deposition (i-PLD) over a wide temperature and (O) range. Besides demonstrating the often astonishing catalytic capabilities of the materials, it is possible to discuss the oxygen exchange reaction mechanism based on experiments on clean surfaces unaltered by external degradation processes. All investigated materials with at least moderate ionic conductivity ( all except LSM) exhibit polarization resistances with very similar (O)- and -dependences, mostly differing only in absolute value.

Mid-infrared intracavity quartz-enhanced photoacoustic spectroscopy with pptv - Level sensitivity using a T-shaped custom tuning fork.

Resonant optical power buildup inside a high finesse cavity is exploited to boost the sensitivity in quartz-enhanced photoacoustic spectroscopy (QEPAS) for CO, NO and HO detection, operating at a wavelength of 4.59 µm. A quartz tuning fork with T-shaped prongs optimized for QEPAS has been employed.

Combining electrochemical and quantitative elemental analysis to investigate the sulfur poisoning process of ceria thin film fuel electrodes.

This work deals with the effect of sulfur incorporation into model-type GDC thin films on their in-plane ionic conductivity. By means of impedance measurements, a strongly deteriorating effect on the grain boundary conductivity was confirmed, which additionally depends on the applied electrochemical polarisation. To quantify the total amount of sulfur incorporated into GDC thin films, online-laser ablation of solids in liquid (online-LASIL) was used as a novel solid sampling strategy.

Atmospheric pressure matrix-assisted laser desorption/ionization mass spectrometry of engine oil additive components.

Rationale: The efficiency of lubricants strongly depends on the content of functional additives. In order to assess the chemical and structural changes taking place in the lubricating oil and its additives during operation, it is essential to develop a method for simple and prompt analysis.

Methods: Two single additives as well as a fully formulated engine oil were analysed using an atmospheric pressure matrix-assisted laser desorption/ionization (AP-MALDI) source coupled to a linear trap quadrupole Orbitrap XL hybrid tandem mass spectrometer and compared with results obtained by means of electrospray ionization (ESI) including additional low-energy collision-induced dissociation (LE-CID).

Secretory protein beta-lactoglobulin in cattle stable dust may contribute to the allergy-protective farm effect.

Background: Growing up on a cattle farm and consuming raw cow's milk protects against asthma and allergies. We expect a cattle-specific protein as active component in this farm effect.

Methods: Dust was collected from cattle and poultry stables and from mattresses of households.

Enhanced Photocatalytic Activity and Stability of BiWO - TiO-N Nanocomposites in the Oxidation of Volatile Pollutants.

The development of active and stable photocatalysts for the degradation of volatile organic compounds under visible light is important for efficient light utilization and environmental protection. Titanium dioxide doped with nitrogen is known to have a high activity but it exhibits a relatively low stability due to a gradual degradation of nitrogen species under highly powerful radiation. In this paper, we show that the combination of N-doped TiO with bismuth tungstate prevents its degradation during the photocatalytic process and results in a very stable composite photocatalyst.

A Covalent Organic Framework/Graphene Dual-Region Hydrogel for Enhanced Solar-Driven Water Generation.

Solar-driven water generation is a sustainable water treatment technology, helping to relieve global water scarcity issues. However, this technology faces great challenges due to the high energy consumption of water evaporation yielding low evaporation rates. Here, a covalent organic framework (COF)/graphene dual-region hydrogel, containing hydrophilic and hydrophobic regions in one material, is developed through a facile growth strategy.

Elemental mapping of fluorine by means of molecular laser induced breakdown spectroscopy.

The growing importance of fluoropolymers in high-tech applications and green technologies results in the rising need for their characterization. In contrast to conventional methods used for this task, laser-induced breakdown spectroscopy (LIBS) provides the advantage of a spatially resolved analysis. Nevertheless, the high excitation energy of fluorine results in low sensitivity of the atomic F(I) lines, which limits the feasibility of its LIBS-based analysis.

Computer-Assisted Analysis of Microplastics in Environmental Samples Based on μFTIR Imaging in Combination with Machine Learning.

The problem of automating the data analysis of microplastics following a spectroscopic measurement such as focal plane array (FPA)-based micro-Fourier transform infrared (FTIR), Raman, or QCL is gaining ever more attention. Ease of use of the analysis software, reduction of expert time, analysis speed, and accuracy of the result are key for making the overall process scalable and thus allowing nonresearch laboratories to offer microplastics analysis as a service. Over the recent years, the prevailing approach has been to use spectral library search to automatically identify spectra of the sample.

Multisensor hyperspectral imaging approach for the microchemical analysis of ultramarine blue pigments.

This work presents a multisensor hyperspectral approach for the characterization of ultramarine blue, a valuable historical pigment, at the microscopic scale combining the information of four analytical techniques at the elemental and molecular levels. The hyperspectral images collected were combined in a single hypercube, where the pixels of the various spectral components are aligned on top of each other. Selected spectral descriptors have been defined to reduce data dimensionality before applying unsupervised chemometric data analysis approaches.

Liquid- and Solid-based Separations Employing Ionic Liquids for the Recovery of Platinum Group Metals Typically Encountered in Catalytic Converters: A Review.

The wide application range and ascending demand for platinum group metals combined with the progressive depletion of their natural resources renders their efficient recycling a very important and pressing matter. Primarily environmental considerations associated with state-of-the-art recovery processes have shifted the focus of the scientific community toward the investigation of alternative recycling approaches. Within this context, ionic liquids have gained considerable attention in the last two decades chiefly sparked by properties such as tunabilty, low-volatility, and relatively easy recyclability.

Research Techniques Made Simple: Lipidomic Analysis in Skin Research.

Although lipids are crucial molecules for cell structure, metabolism, and signaling in most organs, they have additional specific functions in the skin. Lipids are required for the maintenance and regulation of the epidermal barrier, physical properties of the skin, and defense against microbes. Analysis of the lipidome-the totality of lipids-is of similar complexity to those of proteomics or other omics, with lipid structures ranging from simple, linear, to highly complex structures.

Mesoporous Zirconia Coating for Sensing Applications Using Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectroscopy.

Mid-infrared attenuated total reflection (ATR) spectroscopy is a powerful tool for monitoring of various processes. Mesoporous silica, an extensively studied material, has already been applied in sensing schemes due to its high surface area and tunable surface chemistry. However, its poor chemical stability in aqueous solutions at pH values higher than 8 and strong absorption below 1250 cm limits its range of applications.

Photoinduced electronic and ionic effects in strontium titanate.

The interaction of light with solids has been of ever-growing interest for centuries, even more so since the quest for sustainable utilization and storage of solar energy became a major task for industry and research. With SrTiO being a model material for an extensive exploration of the defect chemistry of mixed conducting perovskite oxides, it has also been a vanguard in advancing the understanding of the interaction between light and the electronic and ionic structure of solids. In the course of these efforts, many phenomena occurring during or subsequent to the illumination of SrTiO have been investigated.

A Combined Deep Eutectic Solvent-Ionic Liquid Process for the Extraction and Separation of Platinum Group Metals (Pt, Pd, Rh).

Recovery of platinum group metals from spent materials is becoming increasingly relevant due to the high value of these metals and their progressive depletion. In recent years, there is an increased interest in developing alternative and more environmentally benign processes for the recovery of platinum group metals, in line with the increased focus on a sustainable future. To this end, ionic liquids are increasingly investigated as promising candidates that can replace state-of-the-art approaches.