Effects on the Thermo-Mechanical and Interfacial Performance of Newly Developed PI-Sized Carbon Fiber-Polyether Ether Ketone Composites: Experiments and Molecular Dynamics Simulations.

In this study, polyether ether ketone (PEEK) composites reinforced with newly developed water-dispersible polyimide (PI)-sized carbon fibers (CFs) were developed to enhance the effects of the interfacial interaction between PI-sized CFs and a PEEK polymer on their thermo-mechanical properties. The PI sizing layers on these CFs may be induced to interact vigorously with the p-phenylene groups of PEEK polymer chains because of increased electron affinity. Therefore, these PI-sized CFs are effective for improving the interfacial adhesion of PEEK composites.

All-optical control of high-purity trions in nanoscale waveguide.

The generation of high-purity localized trions, dynamic exciton-trion interconversion, and their spatial modulation in two-dimensional (2D) semiconductors are building blocks for the realization of trion-based optoelectronic devices. Here, we present a method for the all-optical control of the exciton-to-trion conversion process and its spatial distributions in a MoS monolayer. We induce a nanoscale strain gradient in a 2D crystal transferred on a lateral metal-insulator-metal (MIM) waveguide and exploit propagating surface plasmon polaritons (SPPs) to localize hot electrons.

Composition of Organically Modified Silica for the Superhydrophobic Surface with Low Sliding Angle.

Extremely water-repellent surfaces with low sliding angle (SA) have been obtained with a facile single-step sol-gel strategy via co-condensation of tetraethoxysilane (TEOS) and hexadecyltrimethoxysilane (HDTMS) in basic media with an efficient self-cleaning property. We investigated the effect of the molar ratio of HDTMS and TEOS on the properties of the modified silica-coated poly(ethylene terephthalate) (PET) film. A high water contact angle (WCA) of 165° and a low SA of 1.

Unraveling two distinct polymorph transition mechanisms in one n-type single crystal for dynamic electronics.

Cooperativity is used by living systems to circumvent energetic and entropic barriers to yield highly efficient molecular processes. Cooperative structural transitions involve the concerted displacement of molecules in a crystalline material, as opposed to typical molecule-by-molecule nucleation and growth mechanisms which often break single crystallinity. Cooperative transitions have acquired much attention for low transition barriers, ultrafast kinetics, and structural reversibility.

Selective Blocking of Graphene Defects Using Polyvinyl Alcohol through Hydrophilicity Difference.

Defects on graphene over a micrometer in size were selectively blocked using polyvinyl alcohol through the formation of hydrogen bonding with defects. Because this hydrophilic PVA does not prefer to be located on the hydrophobic graphene surface, PVA selectively filled hydrophilic defects on graphene after the process of deposition through the solution. The mechanism of the selective deposition via hydrophilic-hydrophilic interactions was also supported by scanning tunneling microscopy and atomic force microscopy analysis of selective deposition of hydrophobic alkanes on hydrophobic graphene surface and observation of PVA initial growth at defect edges.

Junctionless Electric-Double-Layer MoS Field-Effect Transistor with a Sub-5 nm Thick Electrostatically Highly Doped Channel.

Junctionless transistors are suitable for sub-3 nm applications because of their extremely simple structure and high electrical performance, which compensate for short-channel effects. Two-dimensional semiconductor transition-metal dichalcogenide materials, such as MoS, may also resolve technical and fundamental issues for Si-based technology. Here, we present the first junctionless electric-double-layer field-effect transistor with an electrostatically highly doped 5 nm thick MoS channel.

Large emergent optoelectronic enhancement in molecularly cross-linked gold nanoparticle nanosheets.

A central goal in molecular electronics and optoelectronics is to translate tailorable molecular properties to larger materials and to the device level. Here, we present a method to fabricate molecularly cross-linked, self-assembled 2D nanoparticle sheets (X-NS). Our method extends a Langmuir approach of self-assembling gold nanoparticle (NP) arrays at an air-water interface by replacing the liquid sub-phase to an organic solvent to enable cross-linking with organic molecules, and then draining the sub-phase to deposit films.

Selective Dissolution-Derived Nanoporous Design of Impurity-Free Bi Te Alloys with High Thermoelectric Performance.

Thermoelectric technology, which has been receiving attention as a sustainable energy source, has limited applications because of its relatively low conversion efficiency. To broaden their application scope, thermoelectric materials require a high dimensionless figure of merit (ZT). Porous structuring of a thermoelectric material is a promising approach to enhance ZT by reducing its thermal conductivity.

Substrate-Free Thermoelectric 25 μm-Thick AgSe Films with High Flexibility and In-Plane of 0.5 at Room Temperature.

Thermoelectric inorganic films are flexible when sufficiently thin. By removing the substrate, that is, making them free-standing, the flexibility of thermoelectric films can be enhanced to the utmost extent. However, studies on the flexibility of free-standing thermoelectric inorganic films have not yet been reported.

Easy, Fast Self-Heating Polyurethane Nanocomposite with the Introduction of Thermally Annealed Carbon Nanotubes Using Near-Infrared Lased Irradiation.

In this study, high-crystallinity single walled carbon nanotubes (H-SWNTs) were prepared by high-temperature thermal annealing at 1800 °C and a self-heating shape memory polyurethane nanocomposite with excellent self-heating characteristics was developed within a few seconds by irradiation with near-infrared rays. With a simple method (heat treatment), impurities at the surface of H-SWNTs were removed and at the same time the amorphous structure converted into a crystalline structure, improving crystallinity. Therefore, high conductivity (electric, thermal) and interfacial affinity with PU were increased, resulting in improved mechanical, thermal and electric properties.

Mechanochemical ring-opening metathesis polymerization: development, scope, and mechano-exclusive polymer synthesis.

Ruthenium-alkylidene initiated ring-opening metathesis polymerization has been realized under solid-state conditions by employing a mechanochemical ball milling method. This method promotes greenness and broadens the scope to include mechano-exclusive products. The carbene- and pyridine-based Grubbs 3-generation complex outperformed other catalysts and maintained similar mechanistic features of solution-phase reactions.

Stable water-floating transistor with recyclability.

Electronic wastes from used devices containing environmentally hazardous materials are an immediate concern for the sustainable development of electronic and sensor industries. To address this, a highly controllable and dedicated electronic module should be devised, that allows systematic recollection of as many components from the original device for their reuse. Here, we report the total recycling of an electronic device, exploiting a water-floating system that is based on a water-compatible semiconductor as an active material.

Mapping Out the Nonconjugated Organic Radical Conductors via Chemical or Physical Pathways.

Stable, nitroxide-based organic radicals have gained tremendous attention in a wide range of research fields, ranging from solid-state electronics to energy storage devices. While the success of these organics has been their designer flexibility and the processability that can fully potentiate the open-shell chemistry, a significant knowledge gap exists on the solid-state electronics of small-molecular radicals. Herein, we examine the structure-property relationship that governs the solid-state electronics of a model nitroxide and its derivatives by seeking the connection to their well-established, electrolyte-based chemistry.

Ion-Incorporative, Degradable Nanocellulose Crystal Substrate for Sustainable Carbon-Based Electronics.

Electronic wastes from transient electronics accumulate biologically harmful materials with global concern. Recycling these wastes could prevent the deposition of hazardous chemicals and toxic materials to the environment while saving scarce natural compounds and valuable resources. Here, we report a sustainable electronic device, taking advantage of carbon resources and a biodegradable cellulose composite.

Multifunctional-high resolution imaging plate based on hydrophilic graphene for digital pathology.

In the present study, we showed that hydrophilic graphene can serve as an ideal imaging plate for biological specimens. Graphene being a single-atom-thick semi-metal with low secondary electron emission, array tomography analysis of serial sections of biological specimens on a graphene substrate showed excellent image quality with improved-axis resolution, without including any conductive surface coatings. However, the hydrophobic nature of graphene makes the placement of biological specimens difficult; graphene functionalized with polydimethylsiloxane oligomer was fabricated using a simple soft lithography technique and then processed with oxygen plasma to provide hydrophilic graphene with minimal damage to graphene.

Ultrastrong Hybrid Fibers with Tunable Macromolecular Interfaces of Graphene Oxide and Carbon Nanotube for Multifunctional Applications.

Individual carbon nanotubes (CNT) and graphene have unique mechanical and electrical properties; however, the properties of their macroscopic assemblies have not met expectations because of limited physical dimensions, the limited degree of dispersion of the components, and various structural defects. Here, a state-of-the-art assembly for a novel type of hybrid fiber possessing the properties required for a wide variety of multifunctional applications is presented. A simple and effective multidimensional nanostructure of CNT and graphene oxide (GO) assembled by solution processing improves the interfacial utilization of the components.

Convolutional neural networks for approximating electrical and thermal conductivities of Cu-CNT composites.

This article explores the deep learning approach towards approximating the effective electrical and thermal conductivities of copper (Cu)-carbon nanotube (CNT) composites with CNTs aligned to the field direction. Convolutional neural networks (CNN) are trained to map the two-dimensional images of stochastic Cu-CNT networks to corresponding conductivities. The CNN model learns to estimate the Cu-CNT composite conductivities for various CNT volume fractions, interfacial electrical resistances, R = 20 Ω-20 kΩ, and interfacial thermal resistances, R = 10-10 mK/W.

Structural Effect of Polyimide Precursors on Highly Thermally Conductive Graphite Films.

In this study, polyimide (PI) with high carbonization yield was used as a precursor to prepare graphite films with high thermal conductivity. The crystallinity, grain size, and thermal conductivity of the graphite films were characterized and found to vary according to the chemical structure of the PI precursor. Aromatic PIs containing ortho-substituted hydroxyl groups in the PI main chain (DHB-BPDA) were synthesized by the polycondensation reaction of 3,3'-dihydroxybenzidine (DHB) and 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA).

Atomic-Scale Homogeneous RuCu Alloy Nanoparticles for Highly Efficient Electrocatalytic Nitrogen Reduction.

Ruthenium (Ru) is the most widely used metal as an electrocatalyst for nitrogen (N ) reduction reaction (NRR) because of the relatively high N adsorption strength for successive reaction. Recently, it has been well reported that the homogeneous Ru-based metal alloys such as RuRh, RuPt, and RuCo significantly enhance the selectivity and formation rate of ammonia (NH ). However, the metal combinations for NRR have been limited to several miscible combinations of metals with Ru, although various immiscible combinations have immense potential to show high NRR performance.

Analysis of Dispersion of Carbon Nanotubes in -Cresol.

We analyzed the dispersion state of carbon nanotubes (CNTs) in -cresol using dispersion stability analysis, optical microscopy, and UV-vis spectroscopy. The high dispersion stability of CNT/-cresol dispersion was observed when it was sufficiently treated with ultrasonication. Despite the high dispersion stability, optical microscopy and UV-vis spectroscopy analysis of various CNT/-cresol dispersions revealed that CNT bundles in -cresol were not dispersed into individual CNTs.

Wide-Range Size Fractionation of Graphene Oxide by Flow Field-Flow Fractionation.

Many interesting properties of 2D materials and their assembled structures are strongly dependent on the lateral size and size distribution of 2D materials. Accordingly, effective size separation of polydisperse 2D sheets is critical for desirable applications. Here, we introduce flow field-flow fractionation (FlFFF) for a wide-range size fractionation of graphene oxide (GO) up to 100 μm.

Electrostatically Controllable Channel Thickness and Tunable Low-Frequency Noise Characteristics of Double-Gated Multilayer MoS Field-Effect Transistors with h-BN Dielectric.

Two-dimensional transition-metal dichalcogenide (TMD) materials have attracted increasing attention in efforts to overcome fundamental issues faced by the complementary metal-oxide-semiconductor industry. Multilayer TMD materials such as MoS can be used for high-performance transistor-based applications; the drive currents are high and the materials handle low-frequency (LF) noise well. We fabricated double-gated multilayer MoS transistors using the h-BN dielectric for the top gate and silicon dioxide for the bottom gate.

Ultrasensitive and real-time optical detection of cellular oxidative stress using graphene-covered tunable plasmonic interfaces.

Reactive oxygen species (ROS) regulate various physiological and pathological conditions in cells by interacting with signaling molecules and inducing oxidative stress. Therefore, sensitive monitoring of ROS levels in living cells is important to track cellular state and study the complex role of ROS in the development of various pathologies. Herein, we present an optically tunable plasmonic interface covered with graphene to monitor cellular ROS levels with superior sensitivity and cellular comfortability.