A novel polymer composite from polyhexamethylene guanidine hydrochloride for high performance triboelectric nanogenerators (TENGs).

In this study, we report the successful fabrication of a novel antibacterial triboelectric nanogenerator (TENG) using a polymer composite film based on polyhexamethylene guanidine hydrochloride (PHMG). The composite materials, with optimised ingredient ratios, consist of PHMG, polyvinyl alcohol (PVA) and glutaraldehyde (GA) as a crosslinking agent (PHMG-GA-PVA). Utilising 3D printing, these composite materials were directly deposited on the conductive substrates and used as positive TENG electrodes.

Fabrication and characterization of a chitosan/cyclodextrin/TiO-NPs composite for preservation of avocados.

In this study, a TiO material with nanoparticle size of about 10-20 nm, surface area of 109 m g was synthesized using the microwave-assisted hydrothermal method. The chitosan/TiO film combined with cyclodextrin (chitosan-cyclodextrin/TiO, CS-CD/TiONPs) helps significantly improve the mechanical properties and enhance the antibacterial activity of the polymer film. Furthermore, the content of TiO nanoparticles in CS-CD/TiONPs also affects the tensile strength, antibacterial activity, ripening rate, ethylene production rate, and water vapor permeability during food preservation of the CS-CD film that has been studied.

Investigation on cost-effective composites for CO adsorption from post-gasification residue and metal organic framework.

Cost-effective CO adsorbents are gaining increasing attention as viable solutions for mitigating climate change. In this study, composites were synthesized by electrochemically combining the post-gasification residue of Macadamia nut shell with copper benzene-1,3,5-tricarboxylate (CuBTC). Among the different composites synthesized, the ratio of 1:1 between biochar and CuBTC (B 1:1) demonstrated the highest CO adsorption capacity.

Antioxidant activity of an inclusion complex between rutin and β-cyclodextrin: experimental and quantum chemical studies.

This study aims to synthesize a guest-host complex derived from rutin (Rut) and β-cyclodextrin (β-CD) (denoted as [Rut⊂β-CD]). The obtained substance was characterized by the FT-IR and DSC methods, signifying the formation of an inclusion complex between Rut and β-CD. Complex formation increased the antioxidant activity of rutin corresponding to the decrease of EC values from 1.

Dual anticancer and antibacterial activity of fluorescent naphthoimidazolium salts.

Cancer has emerged as a significant global health challenge, ranking as the second leading cause of death worldwide. Moreover, cancer patients frequently experience compromised immune systems, rendering them susceptible to bacterial infections. Combining anticancer and antibacterial properties in a single drug could lead to improved overall treatment outcomes and patient well-being.

Insights into Structural Behaviors of Thiolated and Aminated Reduced Graphene Oxide Supports to Understand Their Effect on MOR Efficiency.

It is essential to develop novel catalysts with high catalytic activity, strong durability, and good stability for further application in methanol fuel cells. In this work, we present for the first time the effect of the chemical functional groups (thiol and amine) with different electron affinity in reduced graphene oxide supports on the morphology and catalytic activity of platinum nanoparticles for the methanol oxidation reaction. Hydroxyl groups on graphene oxide were initially brominated and then transformed to the desired functional groups.

Desmodinosides A-E: New Flavonoid C-glycosides from Desmodium heterocarpon var. stigosum with hepatoprotective and antifungal activity.

Five new flavonoid C-glycosides named desmodinosides A-E (1-5) and one known compound, apigenin 6-C-β-d-xylopyranosyl-2''-O-β-D-glucopyranoside (6) have been isolated from the methanol extract of the aerial parts of Desmodium heterocarpon var. stigosum. These compounds were determined by 1D and 2D-NMR and HR-MS spectroscopies.

Electrochemical preparation of monodisperse Pt nanoparticles on a grafted 4-aminothiophenol supporting layer for improving the MOR reaction.

The methanol oxidation reaction (MOR) has recently gained a lot of attention due to its application in fuel cells and electrochemical sensors. To enhance the MOR, noble metal nanoparticles should be homogeneously dispersed on the electrode surface with the aid of one suitable support. In this work, 4-aminothiophenol (4-ATP) molecules which contain simultaneously amine and thiol groups were electro-grafted onto the electrode surface to provide anchoring sites, limit aggregation and ensure good dispersion of metal nanoparticles.

Optical properties and stability of small hollow gold nanoparticles.

In the current work, small hollow Au nanoparticles ( ≈ 16 nm) with excellent thermal stability and high photo-thermal conversion efficiency, which have great potential for use in photo-thermal cancer therapy, were prepared through galvanic replacement reaction between Ag nano-templates and gold salt. The position of surface plasmon resonance (SPR) bands for these nanoparticles could be tuned by varying the amount of gold salt. The hydrophobic hollow nanostructures were made water-dispersible by being encapsulated with poly(maleic anhydride--1-octadecene) - PMAO.

Facile construction of S-scheme SnO/g-CN photocatalyst for improved photoactivity.

The SnO2/g-C3N4 composites were fabricated via an annealing mixture of g-C3N4 and SnO2, which were obtained from calcinating melamine and hydrothermal treatment of SnCl solution, respectively. The photocatalytic properties of g-C3N4/SnO2 were studied over the degradation of Rhodamine B (RhB) under visible light, which exhibits a significantly improved photocatalytic activity compared to the single components, g-C3N4 and SnO2. The enhancement in photocatalytic activity of SnO2/g-C3N4 could be described by the S-scheme pathway, in which the effective charge transfer between components is demonstrated toward the suppression in recombination of the photogenerated electron-hole pairs within redox potential conservation.

TiO/TiC/g-CN ternary heterojunction for photocatalytic hydrogen evolution.

Photocatalytic hydrogen (H) generation derived by water has been considered as a renewable energy to solve environmental problems and global energy crises. Thus, it is necessary to explore the most effective photocatalysts by using multi-cocatalysts, due to an intimate interaction between different components. Therefore, we already synthesized the TiO/TiC/g-CN (TTC) photocatalyst from g-CN and TiC MXene via a calcination technique, and applied this composite for H evolution.

Characterization of chitosan/alginate/lovastatin nanoparticles and investigation of their toxic effects in vitro and in vivo.

In this study, chitosan and alginate were selected to prepare alginate/chitosan nanoparticles to load the drug lovastatin by the ionic gelation method. The synthesized nanoparticles loaded with drug were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), laser scattering and differential scanning calorimetry (DSC) methods. The FTIR spectrum of the alginate/chitosan/lovastatin nanoparticles showed that chitosan and alginate interacted with lovastatin through hydrogen bonding and dipolar-dipolar interactions between the C-O, C=O, and OH groups in lovastatin, the C-O, NH, and OH groups in chitosan and the C-O, C=O, and OH groups in alginate.

Polyoxymethylene/silica/polylactic acid-grafted polyethylene glycol nanocomposites: structure, morphology, and mechanical properties and ozone and UV durability.

Polyoxymethylene (POM) is a semicrystalline thermoplastic that displays high tensile strength, thermal stability, and chemical durability. However, its widespread application is limited by its low elongation at break and thermal durability. In the present study, nanosilica (NS) and polylactic acid-grafted polyethylene glycol (PELA) were used as enhancement additives to improve the performance of POM homopolymer.

Development of a portable electrochemical loop mediated isothermal amplification (LAMP) device for detection of hepatitis B virus.

The objective of this study was to develop a simple, inexpensive prototype device for rapid detection of hepatitis B virus (HBV). The device was able to simultaneously amplify, detect and quantify the target HBV DNA. The system was fabricated from a custom-made electrochemical set-up of which the temperature was thermostatically controlled by a water bath.

Synthesis and antibacterial properties of a novel magnetic nanocomposite prepared from spent pickling liquors and polyguanidine.

Magnetic nanoparticles have received much interest for their application in wastewater treatment because of their easy retrieval and reuse. However, the methods used to synthesise high saturation magnetization magnetic nanoparticles require expensive and pure precursors. In the current study, we explore the potential for using spent pickling liquor, a wastewater solution from steel factories, as the iron precursor for preparing iron oxide nanoparticles.

Correction: High magnetisation, monodisperse and water-dispersible CoFe@Pt core/shell nanoparticles.

Correction for 'High magnetisation, monodisperse and water-dispersible CoFe@Pt core/shell nanoparticles' by Ngo T. Dung et al., Nanoscale, 2017, DOI: 10.

High magnetisation, monodisperse and water-dispersible CoFe@Pt core/shell nanoparticles.

High magnetisation and monodisperse CoFe alloy nanoparticles are desired for a wide range of biomedical applications. However, these CoFe nanoparticles are prone to oxidation, resulting in the deterioration of their magnetic properties. In the current work, CoFe alloy nanoparticles were prepared by thermal decomposition of cobalt and iron carbonyls in organic solvents at high temperatures.

Modified electrodes used for electrochemical detection of metal ions in environmental analysis.

Heavy metal pollution is one of the most serious environmental problems, and regulations are becoming stricter. Many efforts have been made to develop sensors for monitoring heavy metals in the environment. This review aims at presenting the different label-free strategies used to develop electrochemical sensors for the detection of heavy metals such as lead, cadmium, mercury, arsenic etc.

Design of interpenetrated network MWCNT/poly(1,5-DAN) on interdigital electrode: toward NO2 gas sensing.

In this paper, poly(1,5-diaminonaphthalene) was interpenetrated into the network made of multiwalled carbon nanotubes (MWCNT) on platinum interdigital electrode (IDE) by electro-polymerization of 1,5-diaminonaphthalene (1,5-DAN). The electro-polymerization process of 1,5-DAN on MWCNT was controlled by scanning the cyclic voltage at 50 mV s(-1) scan rate between -0.1 V and +0.

Controlling the electrodeposition, morphology and structure of hydroxyapatite coating on 316L stainless steel.

Hydroxyapatite (HAp) coatings were prepared on 316L stainless steel (316LSS) substrates by electrochemical deposition in the solutions containing Ca(NO3)2·4H2O and NH4H2PO4 at different electrolyte concentrations. Along with the effect of precursor concentration, the influence of temperature and H2O2 content on the morphology, structure and composition of the coating was thoroughly discussed with the help of X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectra. The in vitro tests in simulated body fluids (SBF) were carried out and then the morphological and structural changes were estimated by SEM and electrochemical techniques (open circuit potential, polarization curves, Nyquist and Bode spectra measurements).