Resonant Ta Doping for Enhanced Mobility in Transparent Conducting SnO.

Transparent conducting oxides (TCOs) are ubiquitous in modern consumer electronics. SnO is an earth abundant, cheaper alternative to InO as a TCO. However, its performance in terms of mobilities and conductivities lags behind that of InO.

Effect of Porous Structure on the Microwave Absorption Capacity of Soft Magnetic Connecting Network Ni/AlO/Ni Film.

Microwave radar absorbing materials have been the focus of the radar stealth research field. In this study, ceramic structured porous honeycomb-like AlO film was prepared by anodic oxidation, and an Ni layer was deposited on the AlO film via electrodeposition in a neutral environment to form a flower- and grain-like structure in a three-dimensional (3D) network Ni/AlO/Ni film. The films both have a through-hole internal structure, soft magnetic properties, and absorb microwaves.

Solid wetting-layers in inorganic nano-reactors: the water in imogolite nanotube case.

By combined use of wide-angle X-ray scattering, thermo-gravimetric analysis, inelastic neutron scattering, density functional theory and density functional theory molecular dynamics simulations, we investigate the structure, dynamics and stability of the water wetting-layer in single-walled aluminogermanate imogolite nanotubes (SW Ge-INTs): an archetypal system for synthetically controllable and monodisperse nano-reactors. We demonstrate that the water wetting-layer is strongly bound and solid-like up to 300 K under atmospheric pressure, with dynamics markedly different from that of bulk water. Atomic-scale characterisation of the wetting-layer reveals organisation of the HO molecules in a curved triangular sublattice stabilised by the formation of three H-bonds to the nanotube's inner surface, with covalent interactions sufficiently strong to promote energetically favourable decoupling of the HO molecules in the adlayer.

A Chemically Soldered Polyoxometalate Single-Molecule Transistor.

Polyoxometalates have been proposed in the literature as nanoelectronic components, where they could offer key advantages with their structural versatility and rich electrochemistry. Apart from a few studies on their ensemble behaviour (as monolayers or thin films), this potential remains largely unexplored. We synthesised a pyridyl-capped Anderson-Evans polyoxometalate and used it to fabricate single-molecule junctions, using the organic termini to chemically "solder" a single cluster to two nanoelectrodes.

Strong Impact of Intramolecular Hydrogen Bonding on the Cathodic Path of [Re(3,3'-dihydroxy-2,2'-bipyridine)(CO)Cl] and Catalytic Reduction of Carbon Dioxide.

Herein, we present the cathodic paths of the Group-7 metal complex [Re(3,3'-DHBPY)(CO)Cl] (3,3'-DHBPY = 3,3'-dihydroxy-2,2'-bipyridine) producing a moderately active catalyst of electrochemical reduction of CO to CO. The combined techniques of cyclic voltammetry and IR/UV-vis spectroelectrochemistry have revealed significant differences in the chemistry of the electrochemically reduced parent complex compared to the previously published Re/4,4'-DHBPY congener. The initial irreversible cathodic step in weakly coordinating THF is shifted toward much less negative electrode potentials, reflecting facile reductive deprotonation of one hydroxyl group and strong intramolecular hydrogen bonding, O-H···O.

Reversible spin storage in metal oxide-fullerene heterojunctions.

We show that hybrid MnO/C heterojunctions can be used to design a storage device for spin-polarized charge: a spin capacitor. Hybridization at the carbon-metal oxide interface leads to spin-polarized charge trapping after an applied voltage or photocurrent. Strong electronic structure changes, including a 1-eV energy shift and spin polarization in the C lowest unoccupied molecular orbital, are then revealed by x-ray absorption spectroscopy, in agreement with density functional theory simulations.

A stable covalent organic framework for photocatalytic carbon dioxide reduction.

Photocatalytic conversion of CO into fuels is an important challenge for clean energy research and has attracted considerable interest. Here we show that tethering molecular catalysts-a rhenium complex, [Re(bpy)(CO)Cl]-together in the form of a crystalline covalent organic framework (COF) affords a heterogeneous photocatalyst with a strong visible light absorption, a high CO binding affinity, and ultimately an improved catalytic performance over its homogeneous Re counterpart. The COF incorporates bipyridine sites, allowing for ligation of the Re complex, into a fully π-conjugated backbone that is chemically robust and promotes light-harvesting.

Freezing-Induced Loading of TiO into Porous Vaterite Microparticles: Preparation of CaCO/TiO Composites as Templates To Assemble UV-Responsive Microcapsules for Wastewater Treatment.

The photocatalytic degradation of organic molecules is one of the effective ways for water purification. At this point, photocatalytic microreactor systems seem to be promising to enhance the versatility of the photoassisted degradation approach. Herein, we propose photoresponsive microcapsules prepared via layer-by-layer assembly of polyelectrolytes on the novel CaCO/TiO composite template cores.

Computationally Guided Discovery of the Sulfide LiAlS in the Li-Al-S Phase Field: Structure and Lithium Conductivity.

With the goal of finding new lithium solid electrolytes by a combined computational-experimental method, the exploration of the Li-Al-O-S phase field resulted in the discovery of a new sulfide LiAlS. The structure of the new phase was determined through an approach combining synchrotron X-ray and neutron diffraction with Li and Al magic-angle spinning nuclear magnetic resonance spectroscopy and revealed to be a highly ordered cationic polyhedral network within a sulfide anion -type sublattice. The originality of the structure relies on the presence of AlS repeating dimer units consisting of two edge-shared Al tetrahedra.

Interstitial Oxide Ion Conductivity in the Langasite Structure: Carrier Trapping by Formation of (Ga,Ge)O Units in LaGa Ge O (0 < ≤ 1.5).

Framework oxides with the capacity to host mobile interstitial oxide anions are of interest as electrolytes in intermediate temperature solid oxide fuel cells (SOFCs). High performance materials of this type are currently limited to the anisotropic oxyapatite and melilite structure types. The langasite structure is based on a corner-shared tetrahedral network similar to that in melilite but is three-dimensionally connected by additional octahedral sites that bridge the layers by corner sharing.

Benchmark performance of low-cost SbSe photocathodes for unassisted solar overall water splitting.

Determining cost-effective semiconductors exhibiting desirable properties for commercial photoelectrochemical water splitting remains a challenge. Herein, we report a SbSe semiconductor that satisfies most requirements for an ideal high-performance photoelectrode, including a small band gap and favourable cost, optoelectronic properties, processability, and photocorrosion stability. Strong anisotropy, a major issue for SbSe, is resolved by suppressing growth kinetics via close space sublimation to obtain high-quality compact thin films with favourable crystallographic orientation.

Modified Chitosan for Silver Recovery-Kinetics, Thermodynamic, and Equilibrium Studies.

：The aim of this study is to investigate the silver recovery from aqueous solutions. There are a variety of recovery methods, such as hydrometallurgical, bio-metallurgical, cementation, reduction, electrocoagulation, electrodialysis, ion exchange, etc. Adsorption represents a convenient, environment friendly procedure, that can be used to recover silver from aqueous solutions.

Water oxidation intermediates on iridium oxide electrodes probed by in situ electrochemical SHINERS.

Shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) is applied to the study of a state-of-the-art water oxidation electrocatalyst, IrOx, during oxygen evolution. The excellent sensitivity allows for in situ detection of surface intermediate species during cyclic voltammetry. Features in the Raman spectrum are correlated with the redox behaviour of the electrode, demonstrating a way to study the mechanisms of electrocatalytic water splitting using equipment available in most laboratories.

Solid state nuclear magnetic resonance studies of hydroxypropylmethylcellulose acetyl succinate polymer, a useful carrier in pharmaceutical solid dispersions.

Hydroxypropylmethylcellulose (HPMC) acetyl succinate (HPMC-AS) is a key polymer used for the enablement of amorphous solid dispersions (ASDs) in oral solid dosage forms. Choice of the appropriate grade within the material is often made empirically by the manufacturer of small-scale formulations, followed by extensive real time stability. A key factor in understanding and predicting the performance of an ASD is related to the presence of hydrogen (or other) bonds between the polymer and active pharmaceutical ingredient (API), which will increase stability over the parameters captured by miscibility and predicted by the Gordon-Taylor equation.

A CO -Tolerant Perovskite Oxide with High Oxide Ion and Electronic Conductivity.

Mixed ionic-electronic conductors (MIECs) that display high oxide ion conductivity (σ ) and electronic conductivity (σ ) constitute an important family of electrocatalysts for a variety of applications including fuel cells and oxygen separation membranes. Often MIECs exhibit sufficient σ but inadequate σ . It has been a long-standing challenge to develop MIECs with both high σ and stability under device operation conditions.

Gelation enabled charge separation following visible light excitation using self-assembled perylene bisimides.

Perylene bisimides (PBIs) can be functionalised to enable controlled aggregation into complex supramolecular structures and are promising materials for photovoltaic and solar fuel applications. Amino acid appended PBIs such as PBI-alanine (PBI-A) have been found to form photoconductive films containing worm-like structures that enable charge transport. However, despite being strong chromophores in the visible region, when PBI-A films are prepared by drying down solutions, activity only occurs under UV illumination.

Fatty acid profile of Romanian's common bean (Phaseolus vulgaris L.) lipid fractions and their complexation ability by β-cyclodextrin.

The goal of the present study was the evaluation of the fatty acid (FA) profile of lipid fraction from dry common beans (Phaseolus vulgaris L.) (CBO) harvested from North-East (NE) and South-West (SW) of Romania and to protect against thermal and oxidative degradation of the contained omega-3 and omega-6 polyunsaturated fatty acid (PUFA) glycerides by β-cyclodextrin (β-CD) nanoencapsulation, using kneading method. The most abundant FAs in the CBO samples were PUFAs, according to gas chromatography-mass spectrometry (GC-MS) analysis.

Kerr gated Raman spectroscopy of LiPF salt and LiPF-based organic carbonate electrolyte for Li-ion batteries.

Fluorescent species are formed during cycling of lithium ion batteries as a result of electrolyte decomposition due to the instability of the non-aqueous electrolytes and side reactions that occur at the electrode surface. The increase in the background fluorescence due to the presence of these components makes it harder to analyse data due to the spectroscopic overlap of Raman scattering and fluorescence. Herein, Kerr gated Raman spectroscopy was shown to be an effective technique for the isolation of the scattering effect from the fluorescence enabling the collection of the Raman spectra of LiPF6 salt and LiPF6-based organic carbonate electrolyte, without the interference of the fluorescence component.

Unusual Sonochemical Assembly between Carbon Allotropes for High Strain-Tolerant Conductive Nanocomposites.

Facile methods toward strain-tolerant graphene-based electronic components remain scarce. Although being frequently used to disperse low-dimensional carbonaceous materials, ultrasonication (US) has never been reliable for fabricating stretchable carbonaceous nanocomposite (SCNC). Inspired by the unusual sonochemical assembly between graphene oxide (GO) and carbon nanotube (CNT), we verified the roots-like GO-CNT covalent bonding, rather than just π-π conjugation, was formed during US.

Gold nanomaterials as key suppliers in biological and chemical sensing, catalysis, and medicine.

Background: Gold nanoparticles (AuNPs) with unique physicochemical properties have received a great deal of interest in the field of biological, chemical and biomedical implementations. Despite the widespread use of AuNPs in chemical and biological sensing, catalysis, imaging and diagnosis, and more recently in therapy, no comprehensive summary has been provided to explain how AuNPs could aid in developing improved sensing and catalysts systems as well as medical settings.

Scope Of Review: The chemistry of Au-based nanosystems was followed by reviewing different applications of Au nanomaterials in biological and chemical sensing, catalysis, imaging and diagnosis by a number of approaches, and finally synergistic combination therapy of different cancers.

Band Alignments, Band Gap, Core Levels, and Valence Band States in CuBiS for Photovoltaics.

The earth-abundant semiconductor CuBiS (CBS) exhibits promising photovoltaic properties and is often considered analogous to the solar absorbers copper indium gallium diselenide (CIGS) and copper zinc tin sulfide (CZTS) despite few device reports. The extent to which this is justifiable is explored via a thorough X-ray photoemission spectroscopy (XPS) analysis: spanning core levels, ionization potential, work function, surface contamination, cleaning, band alignment, and valence-band density of states. The XPS analysis overcomes and addresses the shortcomings of prior XPS studies of this material.

Detection of the Surface of Crystalline YO Using Direct Y Dynamic Nuclear Polarization.

Nuclei with low gyromagnetic ratio (γ) present a serious sensitivity challenge for nulear magnetic resonance (NMR) spectroscopy. Recently, dynamic nuclear polarization (DNP) has shown great promise in overcoming this hurdle by indirect hyperpolarization (via H) of these low-γ nuclei. Here we show that at a magnetic field of 9.

The Future of Layer-by-Layer Assembly: A Tribute to ACS Nano Associate Editor Helmuth Möhwald.

Layer-by-layer (LbL) assembly is a widely used tool for engineering materials and coatings. In this Perspective, dedicated to the memory of ACS Nano associate editor Prof. Dr.