Cell Morphology, Material Property and Ni(II) Adsorption of Microcellular Injection-Molded Polystyrene Reinforced with Graphene Nanoparticles.

Graphene's incorporation into polymers has enabled the development of advanced polymer/graphene nanocomposites with superior properties. This study focuses on the use of a microcellular foamed polystyrene (PS)/graphene (GP) nanocomposite (3 wt%) for nickel (II) ion removal from aqueous solutions. Adsorption behavior was evaluated through FTIR, TEM, SEM, TGA, and XRD analyses.

ZnO-Polyaniline Nanocomposite Functionalised with Laccase Enzymes for Electrochemical Detection of Cetyltrimethylammonuium Bromide (CTAB).

The direct discharge of cationic surfactants into environmental matrices has exponentially increased due to their wide application in many products. These compounds and their degraded products disrupt microbial dynamics, hinder plant survival, and affect human health. Therefore, there is an urgent need to develop electroanalytical assessment techniques for their identification, determination, and monitoring.

Efficiency of potato peel extract in the preservation of cow butter.

This study investigates that the phenolic compound extracted from the potato peels using ethanol by maceration as a natural preservation agent for cow butter, yielding 10.42 ± 0.03 % phenolic compound.

Unlocking the adsorptive effectiveness of naturally occurring heulandite zeolite for the removal of PO and NO anions from wastewater.

The mitigation of high levels of phosphate (PO) and nitrate (NO) ions in water bodies, particularly in agricultural wastewater, holds paramount importance in curbing eutrophication within aquatic ecosystems. Herein, using experimental and computational techniques, the study explored the potential of naturally occurring South Africa heulandite (HEU) zeolite for the removal of PO and NO ions from synthetic wastewater in batch mode. The percentage removal of PO and NO was 59.

The development of multifunctional biochar with NiFeO for the adsorption of Cd (II) from water systems: The kinetics, thermodynamics, and regeneration.

High concentrations of Cd (II) in wastewater have been reported several times which attracted top research attention to mitigate the pollution impacts of the contaminant. Therefore, this study aimed to develop a Zn-doped NiFeO pinecone biochar composite (ZNiF@PB) for the adsorption of Cd (II) from wastewater. FTIR confirmed immobilization of PB on the surface of ZNiF by the presence of C = O at 1638 cm, COOH at 1385 cm, C-O at 1009 cm and Fe-O at 756 cm.

Review of the Integrated Approaches for Monitoring and Treating Parabens in Water Matrices.

Due to their antibacterial and antifungal properties, parabens are commonly used as biocides and preservatives in food, cosmetics, and pharmaceuticals. Parabens have been reported to exist in various water matrices at low concentrations, which renders the need for sample preparation before their quantification using analytical techniques. Thus, sample preparation methods such as solid-phase extraction (SPE), rotating-disk sorptive extraction (RDSE), and vortex-assisted dispersive liquid-liquid extraction (VA-DLLE) that are commonly used for parabens extraction and preconcentration have been discussed.

Comparative Seasonal Trends and Potential Health Impacts of Arsenic and Chromium in Surface Water after Adsorption Using Highly Dispersed FeO Nanoparticles.

Surface water from springs, rivers, and dams is often used as an unconventional drinking water source in rural areas where potable water is often unavailable. However, this practice carries significant health risks due to potential contaminants. In this study, the concentrations of arsenic (As) and chromium (Cr) were assessed seasonally using graphite furnace atomic absorption spectrometry (GFAAS).

Unveiling the potential of step-scheme and Type II photocatalysts in dinitrogen reduction to ammonia.

Innovative photocatalytic systems designed to enhance efficiency of nitrogen fixation processes, specifically focusing on sustainable ammonia (NH) production strategies via dinitrogen (N) reduction into ammonia (NH). This process is critical for sustainable agriculture and energy production. To improve photocatalyst activity, catalyst stability and reusability, reduction efficiency due to electron/hole recombination, and light-absorption efficiency has drawn extensive attention.

Mitigating Membrane Fouling in Abattoir Wastewater Treatment: Integration of Pretreatment Step with Zwitterion Modified Graphene Oxide-Polyethersulfone Composite Membranes.

Composite polyethersulfone (PES) membranes containing N-aminoethyl piperazine propane sulfonate (AEPPS)-modified graphene oxide (GO) were integrated with either of the two pretreatment processes (activated carbon (AC) adsorption or polyelectrolyte coagulation) to assess their effectiveness in mitigating membrane fouling during the treatment of abattoir wastewater. The AEPPS@GO-modified membranes, as compared to the pristine PES membranes, showed improved hydrophilicity, with water uptake increasing from 72 to 118%, surface porosity increasing from 2.34 to 27%, and pure water flux (PWF) increasing from 235 to 673 L.

Chemical and Resistive Switching Properties of Extract-Carboxymethyl Cellulose Composite: A Potential Active Layer for Biodegradable Memory Devices.

Biodegradable electronic devices play a crucial role in addressing the escalating issue of electronic waste accumulation, which poses significant environmental threats. In this study, we explore the utilization of a methanol-based extract of the plant blended with a carboxymethyl cellulose biopolymer to produce a biodegradable and environmentally friendly functional material for a resistive switching memory system using silver and tungsten electrodes. Our analyses revealed that these two materials chemically interact to generate a perfect composite with near semiconducting optical bandgap (4.

The Application of TiO/ZrO-Modified Nanocomposite PES Membrane for Improved Permeability of Textile Dye in Water.

This study investigates the modification of polyethersulfone (PES) membranes with 1 wt% titanium dioxide (TiO), zirconium dioxide (ZrO) and a nanocomposite of TiO/ZrO. The aim was to efficiently remove Rhodamine B (RhB) from water using a threefold approach of adsorption, filtration and photodegradation. Among the modified membranes (TiO, ZrO and TiO/ZrO), the TiO/ZrO-PES nanocomposite membrane showed a better performance in rejection of RhB than other membranes with the rejection efficiency of 96.

Efficient Removal of PFASs Using Photocatalysis, Membrane Separation and Photocatalytic Membrane Reactors.

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) are persistent compounds characterized by stable C-F bonds giving them high thermal and chemical stability. Numerous studies have highlighted the presence of PFASs in the environment, surface waters and animals and humans. Exposure to these chemicals has been found to cause various health effects and has necessitated the need to develop methods to remove them from the environment.

Impact of parametric seasonal variations on water quality in the Crocodile River and Inyaka Dam in the Mpumalanga Province, South Africa.

This study assessed seasonal variations in water quality and their impact on the Inyaka Dam and Crocodile River in Mpumalanga Province, South Africa. A total of 206 water samples were collected across four seasons to analyse parameters including pH, turbidity, electrical conductivity (EC), temperature, Manganese (Mn), Iron (Fe), phosphate (PO ), nitrate-nitrogen (NO-N), , total coliforms, faecal streptococci, and Bifidobacteria. Principal component analysis (PCA) and Pearson correlation identified major pollutants and their seasonal variations, while cluster analysis grouped water quality by parameter fluctuations.

Method development and optimization for dispersive liquid-liquid microextraction factors using the response surface methodology with desirability function for the ultra-high performance liquid chromatography quadrupole time of flight mass spectrometry determination of organic contaminants in water samples: risk and greenness assessment.

A simple, cost effective, and efficient dispersive liquid-liquid microextraction method was developed and optimized for the determination of organic contaminants in different environmental water matrices followed by UHPLC-QTOF-MS analysis. In the preliminary experiments, the univariate optimization approach was used to select tetrachloroethylene and acetonitrile as extraction and disperser solvents, respectively. The significant factors influencing DLLME were screened using full factorial design, and the optimal values for each variable were then derived through further optimization using central composite design with desirability function.

Exploring acid mine drainage treatment through adsorption: a bibliometric analysis.

Discharge of acidic wastewater from mining activities (acid mine drainage (AMD)) is a major global environmental and public health issue. Although several approaches, including chemical precipitation and membrane technology, have been developed to treat AMD, adsorption has emerged as the most promising technology due to its cost-effectiveness and efficacy. Despite the wide adoption of adsorption in treating AMD, the evolution of research in this area remains poorly understood.

Synthesis and Dye Adsorption Dynamics of Chitosan-Polyvinylpolypyrrolidone (PVPP) Composite.

One major environmental issue responsible for water pollution is the presence of dyes in the aquatic environment as a result of human activity, particularly the textile industry. Chitosan-Polyvinylpolypyrrolidone (PVPP) polymer composite beads were synthesized and explored for the adsorption of dyes (Bismarck brown (BB), orange G (OG), brilliant blue G (BBG), and indigo carmine (IC)) from dye solution. The CS-PVPP beads demonstrated high removal efficiency of BB (87%), OG (58%), BBG (42%), and IC (49%).

Tailoring the characteristics of polyacrylonitrile nanofiltration membranes for nickel removal from wastewater: The influence of binary solvents and pore-forming agents.

This work presents the results of an investigation on the physiochemical and structural characteristics of polyacrylonitrile (PAN) nanofiltration (NF) membranes prepared using a novel concept of binary solvents for nickel (Ni) removal from wastewater streams. The thermodynamic and kinetic aspects are emphasized aiming to optimize dope formulation, membrane performance, and durability. The fabricated membranes were characterized by scanning electron microscopy (SEM), porosimetry, tensile stress/strain, and flux and rejection.

Chemical profiling of paper recycling grades using GC-MS and LC-MS: An exploration of contaminants and their possible sources.

Paper packaging made with recycled paperboard is used to pack various consumer goods that can include amongst others, electronics, toys, food, cosmetics, and stationery. Chemical profiling of the various paper recycling grades used in the manufacture of recycled paperboard was undertaken to investigate possible sources of contaminants and their propagation in the paper recycling chain. Pre-consumer, retail and post-consumer paper-based materials were collected at papermills, corrugators, grocery stores, household waste, solid waste disposal sites and recycling facilities.

Valorization and Upcycling of Acid Mine Drainage and Plastic Waste via the Preparation of Magnetic Sorbents for Adsorption of Emerging Contaminants.

Plastic waste poses a serious environmental risk, but it can be recycled to produce a variety of nanomaterials for water treatment. In this study, poly(ethylene terephthalate) (PET) waste and acid mine drainage were used in the preparation of magnetic mesoporous carbon (MMC) nanocomposites for the adsorptive removal of pharmaceuticals and personal care products (PPCPs) from water samples. The latter were then characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), and ζ potential.

s-scheme3D/3D Bi/BiOBr/P Doped g-C3 N4 with Oxygen Vacancies (Ov) for Photodegradation of Pharmaceuticals: In-situ HO Production and Plasmon Induced Stability.

Complications accompanying photocatalyst stability and recombination of exciton charges in pollutants degradation has been addressed through the construction of heterojunctions, especially S-scheme heterojunction with strong and distinctive redox centres. Herein, an S-scheme BiOBr (BOR) and g-CNPO (CNPO) catalyst (BORCNPO) with oxygen vacancy (Ov) was synthesized for levofloxacin (LVX) and oxytetracycline (OTC) photodegradation under visible light. The 3D/3D BORCNPO catalyst possessed C-O-Br bridging bonds for efficient charge transfer during the fabrication of S-scheme heterojunction.

The development of Giant reed biochar for adsorption of Basic Blue 41 and Eriochrome Black T. azo dyes from wastewater.

The textile industry is discharging high concentrations of anionic and cationic azo dyes into the nearby environment, which can cause adverse effects on public health, and the aquatic environment. Therefore, this study aimed to develop giant reed biochar and apply for the removal of Basic blue 41 (BB41) and Eriochrome black T (EBT) azo dyes from water. Characterization techniques such as BET surface area analyzer, Fourier-transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermal gravimetric analyzer (TGA) were applied for biochar description.