Wood Derived Cellulose Scaffolds-Processing and Mechanics.

Wood-derived cellulose materials obtained by structure-retaining delignification are attracting increasing attention due to their excellent mechanical properties and great potential to serve as renewable and CO storing cellulose scaffolds for advanced hybrid materials with embedded functionality. Various delignification protocols and a multitude of further processing steps including polymer impregnation and densification are applied resulting in a large range of properties. However, treatment optimization requires a more comprehensive characterization of the developed materials in terms of structure, chemical composition, and mechanical properties for faster progress in the field.

Analyzing Plant Cell Wall Ultrastructure by Scanning Near-Field Optical Microscopy (SNOM).

The importance of lignocellulosic materials in various research areas including for example biorefinery processes and new biomaterials is constantly rising. Therefore, a detailed knowledge on the macromolecular assembly of plant cell walls is needed. However, despite the tremendous progress in the structural and chemical analysis of plant cell walls there are still uncertainties concerning the ultrastructure.

CELLULOSE SYNTHASE INTERACTING 1 is required for wood mechanics and leaf morphology in aspen.

Cellulose microfibrils synthesized by CELLULOSE SYNTHASE COMPLEXES (CSCs) are the main load-bearing polymers in wood. CELLULOSE SYNTHASE INTERACTING1 (CSI1) connects CSCs with cortical microtubules, which align with cellulose microfibrils. Mechanical properties of wood are dependent on cellulose microfibril alignment and structure in the cell walls, but the molecular mechanism(s) defining these features is unknown.

The onset of the frictional motion of dissimilar materials.

Frictional motion between contacting bodies is governed by propagating rupture fronts that are essentially earthquakes. These fronts break the contacts composing the interface separating the bodies to enable their relative motion. The most general type of frictional motion takes place when the two bodies are not identical.

Enzyme immobilization inside the porous wood structure: a natural scaffold for continuous-flow biocatalysis.

Enzymes are often immobilized on solid supports to enable their recovery from reaction solutions, facilitate their reuse and hence increase cost-effectiveness in their application. Immobilized enzymes may even be used for flow-through applications in continuous processes. However, the synthesis of traditional immobilization scaffolds and immobilization techniques lack sustainability as they are often based on fuel-based materials and tedious synthesis- and immobilization approaches.

Single-Nanoparticle Thermometry with a Nanopipette.

Thermal measurements at the nanoscale are key for designing technologies in many areas, including drug delivery systems, photothermal therapies, and nanoscale motion devices. Herein, we present a nanothermometry technique that operates in electrolyte solutions and, therefore, is applicable for many measurements, capable of measuring and mapping temperature with nanoscale spatial resolution and sensitive to detect temperature changes down to 30 mK with 43 μs temporal resolution. The methodology is based on local measurements of ionic conductivity confined at the tip of a pulled glass capillary, a nanopipettete, with opening diameters as small as 6 nm.

The Atomic-Level Structure of Cementitious Calcium Aluminate Silicate Hydrate.

Despite use of blended cements containing significant amounts of aluminum for over 30 years, the structural nature of aluminum in the main hydration product, calcium aluminate silicate hydrate (C-A-S-H), remains elusive. Using first-principles calculations, we predict that aluminum is incorporated into the bridging sites of the linear silicate chains and that at high Ca:Si and HO ratios, the stable coordination number of aluminum is six. Specifically, we predict that silicate-bridging [AlO(OH)] complexes are favored, stabilized by hydroxyl ligands and charge balancing calcium ions in the interlayer space.

Mastering Yield Stress Evolution and Formwork Friction for Smart Dynamic Casting.

The construction industry is a slow adopter of new technologies and materials. However, interdisciplinary research efforts in digital fabrication methods with concrete aim to make a real impact on the way we build by showing faster production, higher quality and enlarged freedom of design. In this paper, the potential and constraints of a specific digital slip-forming process, smart dynamic casting (SDC), are investigated with a material-focused approach in the complex task of producing thin folded structures.

The Influences of Cement Hydration and Temperature on the Thixotropy of Cement Paste.

The rheological properties of fresh cement paste are highly influenced by a large number of parameters, among which the most important factors are the applied shear stress, and the shear history, the age of the sample and the temperature. The effects of these parameters on the yield stress (designated as structural limit stress in this work), the viscosity and the structural recovery rate (i.e.

C-S-H Pore Size Characterization Via a Combined Nuclear Magnetic Resonance (NMR)-Scanning Electron Microscopy (SEM) Surface Relaxivity Calibration.

A new method for the nuclear magnetic resonance (NMR) surface relaxivity calibration in hydrated cement samples is proposed. This method relies on a combined analysis of 28-d hydrated tricalcium silicate samples by scanning electron microscopy (SEM) image analysis and H-time-domain (TD)-NMR relaxometry. Pore surface and volume data for interhydrate pores are obtained from high resolution SEM images on surfaces obtained by argon broad ion beam sectioning.

Green Synthesis of Hierarchical Metal-Organic Framework/Wood Functional Composites with Superior Mechanical Properties.

The applicability of advanced composite materials with hierarchical structure that conjugate metal-organic frameworks (MOFs) with macroporous materials is commonly limited by their inferior mechanical properties. Here, a universal green synthesis method for the in situ growth of MOF nanocrystals within wood substrates is introduced. Nucleation sites for different types of MOFs are readily created by a sodium hydroxide treatment, which is demonstrated to be broadly applicable to different wood species.

The Influence of Bleeding of Cement Suspensions on Their Rheological Properties.

Flowable concretes tend to segregate. The risk of segregation is particularly high when the concrete is vibrated during the compaction process. A well-known segregation phenomenon is the so-called "bleeding".

Understanding the Formation of Heartwood in Larch Using Synchrotron Infrared Imaging Combined With Multivariate Analysis and Atomic Force Microscope Infrared Spectroscopy.

Formation of extractive-rich heartwood is a process in live trees that make them and the wood obtained from them more resistant to fungal degradation. Despite the importance of this natural mechanism, little is known about the deposition pathways and cellular level distribution of extractives. Here we follow heartwood formation in var.

Modeling Anomalous Moisture Transport in Cement-Based Materials with Kinetic Permeability.

The durability of reinforced concrete structures is closely related to moisture state in cement-based materials. Therefore, it is crucial to develop moisture models that can accurately predict moisture state in the materials. However, many studies reported anomalous moisture transport in cement-based materials that cannot be well simulated by the conventional models.

Cell wall structure and composition is affected by light quality in tomato seedlings.

Light affects many aspects of cell development. Tomato seedlings growing at different light qualities (white, blue, green, red, far-red) and in the dark displayed alterations in cell wall structure and composition. A strong and negative correlation was found between cell wall thickness and hypocotyl growth.

A novel approach to systematically collect critical chloride contents in concrete in an open access data base.

A living data collection providing critical chloride contents for steel corrosion in concrete (C) is presented. The C values were measured on samples taken from engineering structures. This approach allows to overcome the well-known limitations of testing laboratory samples.

Visualization of the Stimuli-responsive Surface Behavior of Functionalized Wood Material by Chemical Force Microscopy.

The hierarchical and porous wood structure provides a stable scaffold to design functionalized lignocellulosic materials with extended properties by chemical modification techniques. However, proper nanoscale characterization methods for these novel materials are needed to confirm the presence of the added functionality and to locate the introduced functional groups with high spatial resolution. Chemical force microscopy is a suitable characterization method to distinguish chemical surface characteristics by scanning the samples surface with a functionalized tip.

Characterization data of reference cement CEM I 42.5 R used for priority program DFG SPP 2005 "Opus Fluidum Futurum - Rheology of reactive, multiscale, multiphase construction materials".

A thorough characterization of starting materials is the precondition for further research, especially for cement, which contains various phases and presents quite a complex material for fundamental scientific investigation. In the paper at hand, the characterization data of the reference cement CEM I 42.5 R used within the priority program 2005 of the German Research Foundation (DFG SPP 2005) are presented from the aspects of chemical and mineralogical compositions as well as physical and chemical properties.

Sequential disruption of the shortest path in critical percolation.

We investigate the effect of sequentially disrupting the shortest path of percolation clusters at criticality by comparing it with the shortest alternative path. We measure the difference in length and the enclosed area between the two paths. The sequential approach allows us to study spatial correlations.

Ethylene Signaling Is Required for Fully Functional Tension Wood in Hybrid Aspen.

Tension wood (TW) in hybrid aspen trees forms on the upper side of displaced stems to generate a strain that leads to uplifting of the stem. TW is characterized by increased cambial growth, reduced vessel frequency and diameter, and the presence of gelatinous, cellulose-rich (G-)fibers with its microfibrils oriented parallel to the fiber cell axis. Knowledge remains limited about the molecular regulators required for the development of this special xylem tissue with its characteristic morphological, anatomical, and chemical features.

Universality in the firing of minicolumnar-type neural networks.

An open question in biological neural networks is whether changes in firing modalities are mainly an individual network property or whether networks follow a joint pathway. For the early developmental period, our study focusing on a simple network class of excitatory and inhibitory neurons suggests the following answer: Networks with considerable variation of topology and dynamical parameters follow a universal firing paradigm that evolves as the overall connectivity strength and firing level increase, as seen in the process of network maturation. A simple macroscopic model reproduces the main features of the paradigm as a result of the competition between the fundamental dynamical system notions of synchronization vs chaos and explains why in simulations the paradigm is robust regarding differences in network topology and largely independent from the neuron model used.

Analysis of hygroscopic self-shaping wood at large scale for curved mass timber structures.

The growing timber manufacturing industry faces challenges due to increasing geometric complexity of architectural designs. Complex and structurally efficient curved geometries are nowadays easily designed but still involve intensive manufacturing and excessive machining. We propose an efficient form-giving mechanism for large-scale curved mass timber by using bilayered wood structures capable of self-shaping by moisture content changes.

Collapse of Orthotropic Spherical Shells.

We report on the buckling and subsequent collapse of orthotropic elastic spherical shells under volume and pressure control. Going far beyond what is known for isotropic shells, a rich morphological phase space with three distinct regimes emerges upon variation of shell slenderness and degree of orthotropy. Our extensive numerical simulations are in agreement with experiments using fabricated polymer shells.

Structural Characterization and Analysis of High-Strength Laminated Composites from Recycled Newspaper and HDPE.

Recycled newspaper (NP) shows excellent potential as a reinforcement for polymer composites. Herein, high-strength laminated composites were prepared by using NP laminas as reinforcement and high-density polyethylene (HDPE) films as matrix. Physical and mechanical properties of the laminated composites were measured.