Locally Concentrated Ionic Liquid Electrolytes for Wide-Temperature-Range Aluminum-Sulfur Batteries.

Aluminum-sulfur (Al-S) batteries are promising energy storage devices due to their high theoretical capacity, low cost, and high safety. However, the high viscosity and inferior ion transport of conventionally used ionic liquid electrolytes (ILEs) limit the kinetics of Al-S batteries, especially at sub-zero temperatures. Herein, locally concentrated ionic liquid electrolytes (LCILE) formed via diluting the ILEs with non-solvating 1,2-difluorobenzene (dFBn) co-solvent are proposed for wide-temperature-range Al-S batteries.

Improving rechargeable magnesium batteries through dual cation co-intercalation strategy.

The development of competitive rechargeable Mg batteries is hindered by the poor mobility of divalent Mg ions in cathode host materials. In this work, we explore the dual cation co-intercalation strategy to mitigate the sluggishness of Mg in model TiS material. The strategy involves pairing Mg with Li or Na in dual-salt electrolytes in order to exploit the faster mobility of the latter with the aim to reach better electrochemical performance.

Precipitation Stripping of V(V) as a Novel Approach for the Preparation of Two-Dimensional Transition Metal Vanadates.

Cobalt, nickel, manganese and zinc vanadates were synthesized by a hydrometallurgical two-phase method. The extraction of vanadium (V) ions from alkaline solution using Aliquat 336 was followed by the production of metal vanadates through precipitation stripping. Precipitation stripping was carried out using solutions of the corresponding metal ions (Ni (II), Co (II), Mn (II) and Zn (II), 0.

Constructing an Anion-Braking Separator to Regulate Local Li Solvation Structure for Stabilizing Lithium Metal Batteries.

Lithium metal batteries (LMBs) offer significant advantages in energy density and output voltage, but they are severely limited by uncontrollable Li dendrite formation resulting from uneven Li behaviors and high reactivity with potential co-solvent plating. Herein, to uniformly enhance the Li behaviors in desolvation and diffusion, the local Li solvation shell structure is optimized by constructing an anion-braking separator, hence dynamically reducing the self-amplifying behavior of dendrites. As a prototypal, two-dimensional lithiated-montmorillonite (LiMMT) is blade-coated on the commercial separator, where abundant -OH groups as Lewis acidic sites and electron acceptors could selectively adsorb corresponding FSI anions, regulating the solvation shell structure and restricting their migration.

Greener, Safer and Better Performing Aqueous Binder for Positive Electrode Manufacturing of Sodium Ion Batteries.

P2-type cobalt-free MnNi-based layered oxides are promising cathode materials for sodium-ion batteries (SIBs) due to their high reversible capacity and well chemical stability. However, the phase transformations during repeated (dis)charge steps lead to rapid capacity decay and deteriorated Na diffusion kinetics. Moreover, the electrode manufacturing based on polyvinylidene difluoride (PVDF) binder system has been reported with severely defluorination issue as well as the energy intensive and expensive process due to the use of toxic and volatile N-methyl-2-pyrrolidone (NMP) solvent.

Development of in situ high resolution NMR: Proof-of-principle for a new (spinning) cylindrical mini-pellet approach applied to a Lithium ion battery.

Solid-state nuclear magnetic resonance (ssNMR) spectroscopy is a powerful technique for characterizing the local structure and dynamics of battery and other materials. It has been widely used to investigate bulk electrode compounds, electrolytes, and interfaces. Beside common ex situ investigations, in situ and operando techniques have gained considerable importance for understanding the reaction mechanisms and cell degradation of electrochemical cells.

Metal-Ion Intercalation Mechanisms in Vanadium Pentoxide and Its New Perspectives.

The investigation into intercalation mechanisms in vanadium pentoxide has garnered significant attention within the realm of research, primarily propelled by its remarkable theoretical capacity for energy storage. This comprehensive review delves into the latest advancements that have enriched our understanding of these intricate mechanisms. Notwithstanding its exceptional storage capacity, the compound grapples with challenges arising from inherent structural instability.

Synthesis and Structure Stabilization of Disordered Rock Salt Mn/V-Based Oxyfluorides as Cathode Materials for Li-Ion Batteries.

The demand for high-performance lithium-ion batteries and thus efficient cathode materials is steadily increasing. In addition to a high energy density and long lifetime, these should also be cost-effective and environmentally benign. Manganese-based materials have particular potential because manganese is available in sufficient quantities and can be supplied at a comparatively low cost.

Three-Dimensional Nitrogen-Doped Carbonaceous Networks Anchored with Cobalt as Separator Modification Layers for Low-Polarization and Long-Lifespan Aluminum-Sulfur Batteries.

Aluminum-sulfur (Al-S) batteries have attracted extensive interest due to their high theoretical energy density, inherent safety, and low cost. However, severe polarization and poor cycling performance significantly limit the development of Al-S batteries. Herein, three-dimensional (3D) nitrogen-doped carbonaceous networks anchored with cobalt (Co@C) is proposed as a separator modification layer to mitigate these issues, prepared via carbonizations of a mixture of ZIF-7, melamine, and CoCl.

Hydronium Intercalation Enables High Rate in Hexagonal Molybdate Single Crystals.

Rapid proton transport in solid-hosts promotes a new chemistry in achieving high-rate Faradaic electrodes. Exploring the possibility of hydronium intercalation is essential for advancing proton-based charge storage. Nevertheless, this is yet to be revealed.

Conformational States of the CXCR4 Inhibitor Peptide EPI-X4-A Theoretical Analysis.

EPI-X4, an endogenous peptide inhibitor, has exhibited potential as a blocker of CXCR4-a G protein-coupled receptor. This unique inhibitor demonstrates the ability to impede HIV-1 infection and halt CXCR4-dependent processes such as tumor cell migration and invagination. Despite its promising effects, a comprehensive understanding of the interaction between EPI-X4 and CXCR4 under natural conditions remains elusive due to experimental limitations.

Water-soluble ionic carbon nitride as unconventional stabilizer for highly catalytically active ultrafine gold nanoparticles.

Ultrafine metal nanoparticles (NPs) hold promise for applications in many fields, including catalysis. However, ultrasmall NPs are typically prone to aggregation, which often leads to performance losses, such as severe deactivation in catalysis. Conventional stabilization strategies (, immobilization, embedding, or surface modification by capping agents) are typically only partly effective and often lead to loss of catalytic activity.

Reinforcing the Electrode/Electrolyte Interphases of Lithium Metal Batteries Employing Locally Concentrated Ionic Liquid Electrolytes.

Lithium metal batteries (LMBs) with nickel-rich cathodes are promising candidates for next-generation high-energy-density batteries, but the lack of sufficiently protective electrode/electrolyte interphases (EEIs) limits their cyclability. Herein, trifluoromethoxybenzene is proposed as a cosolvent for locally concentrated ionic liquid electrolytes (LCILEs) to reinforce the EEIs. With a comparative study of a neat ionic liquid electrolyte (ILE) and three LCILEs employing fluorobenzene, trifluoromethylbenzene, or trifluoromethoxybenzene as cosolvents, it is revealed that the fluorinated groups tethered to the benzene ring of the cosolvents not only affect the electrolytes' ionic conductivity and fluidity, but also the EEIs' composition via adjusting the contribution of the 1-ethyl-3-methylimidazolium cation (Emim ) and bis(fluorosulfonyl)imide anion.

Iron-based fluorophosphate NaFePOF as a cathode for aqueous zinc-ion batteries.

Aqueous zinc-ion batteries form a key post-Li-ion batteries to cater the rising demand for grid storage. Fe-based compounds can be used as economical cathodes for zinc-ion batteries. Herein, we explored iron-based flourophosphate as a potential polyanionic cathode.

Ionic Liquid Boosting the Electrochemical Stability of a Poly(1,3-dioxolane) Gel Electrolyte for High-voltage Solid-State Lithium Batteries.

Poor interfacial contact between solid-state electrolytes and electrodes limits high-voltage performance of solid-state lithium batteries. A new gel electrolyte is proposed via in-situ polymerization, incorporating fluoroethylene carbonate (FEC) solvent and ionic liquid1-butyl-1-methylpiperidinium bis(trifluoromethylsulfonyl)imide (PP TFSI). This combination synergistically enhances Li ion transport, achieving a transfer number of 0.

Simulation of oriented NMR spectra: Combining molecular dynamics and chemical shift tensor calculations.

Solid state NMR is widely used to study the orientation and other structural features of proteins and peptides in lipid bilayers. Using data obtained by PISEMA (Polarization Inversion Spin Exchange at Magic Angle) experiments, periodic spectral patterns arise from well-aligned α-helical molecules. Significant problems in the interpretation of PISEMA spectra may arise for systems that do not form perfectly defined secondary structures, like α-helices, or the signal pattern is disturbed by molecular motion.

Thermodynamic effects of gas adiabatic index on cavitation bubble collapse.

In this paper, an improved multicomponent lattice Boltzmann model is employed to investigate the impact of the gas properties, specifically the gas adiabatic index, on the thermodynamic effects of cavitation bubble collapse. The study focuses on analyzing the temperature evolution in the flow field and the resulting thermal effects on the surrounding wall. The accuracy of the developed model is verified through comparisons with analytical solutions of the Rayleigh-Plesset equation and the validation of the adiabatic law.

Modification of Al Surface via Acidic Treatment and its Impact on Plating and Stripping.

Amorphous Al O film that naturally exists on any Al substrate is a critical bottleneck for the cyclic performance of metallic Al in rechargeable Al batteries. The so-called electron/ion insulator Al oxide slows down the anode's activation and hinders Al plating/stripping. The Al O film induces different surface properties (roughness and microstructure) on the metal.

Practical Cell Design for PTMA-Based Organic Batteries: an Experimental and Modeling Study.

Poly(2,2,6,6-tetramethyl-1-piperidinyloxy methacrylate) (PTMA) is one of the most promising organic cathode materials thanks to its relatively high redox potential, good rate performance, and cycling stability. However, being a p-type material, PTMA-based batteries pose additional challenges compared to conventional lithium-ion systems due to the involvement of anions in the redox process. This study presents a comprehensive approach to optimize such batteries, addressing challenges in electrode design, scalability, and cost.

Determinants of species-specific utilization of ACE2 by human and animal coronaviruses.

Utilization of human ACE2 allowed several bat coronaviruses (CoVs), including the causative agent of COVID-19, to infect humans directly or via intermediate hosts. However, the determinants of species-specific differences in ACE2 usage and the frequency of the ability of animal CoVs to use human ACE2 are poorly understood. Here we applied VSV pseudoviruses to analyze the ability of Spike proteins from 26 human or animal CoVs to use ACE2 receptors across nine reservoir, potential intermediate and human hosts.

Revealing the Structural Evolution of Electrode/Electrolyte Interphase Formation during Magnesium Plating and Stripping with operando EQCM-D.

Rechargeable magnesium batteries could provide future energy storage systems with high energy density. One remaining challenge is the development of electrolytes compatible with the negative Mg electrode, enabling uniform plating and stripping with high Coulombic efficiencies. Often improvements are hindered by a lack of fundamental understanding of processes occurring during cycling, as well as the existence and structure of a formed interphase layer at the electrode/electrolyte interface.

From Squaric Acid Amides (SQAs) to Quinoxaline-Based SQAs─Evolution of a Redox-Active Cathode Material for Organic Polymer Batteries.

The search for new redox-active organic materials (ROMs) is essential for the development of sustainable energy-storage solutions. In this study, we present a new class of cyclobuta[]quinoxaline-1,2-diones or squaric acid quinoxalines (SQXs) as highly promising candidates for ROMs featuring exceptional stability and high redox potentials. While simple 1,2- and 1,3-squaric acid amides (SQAs), initially reported by Hünig and coworkers decades ago, turned out to exhibit low stability in their radical cation oxidation states, we demonstrate that embedding the nitrogen atoms into a quinoxaline heterocycle leads to robust two-electron SQX redox systems.

Unraveling Propylene Oxide Formation in Alkali Metal Batteries.

The increasing need for electrochemical energy storage drives the development of post-lithium battery systems. Among the most promising new battery types are sodium-based battery systems. However, like its lithium predecessor, sodium batteries suffer from various issues like parasitic side reactions, which lead to a loss of active sodium inventory, thus reducing the capacity over time.

An effective model for sodium insertion in hard carbons.

Sodium ion batteries (NIBs) are a potential alternative to Lithium ion batteries (LIBs) because of their lower cost and greater availability. As anodes, hard carbons (HCs) seem to be the most promising candidates for NIBs. Previous numerical theoretical research studies have focussed on the general conditions for Na insertion in HCs, while experiments have shown that the properties of Na insertion in HCs depend strongly on specific material properties of HCs.